'Brymec PVC Solvent Cement'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions 'TDS Brymec CEMENT Rev 01' review date '27-05-2022'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/07/2026

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of lock shield or handwheel operated gate valves with brass bodies, gate & PTFE seals, for use with copper tube manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2204711

Size:

see model

Marking:

WRAS, FLOW ARROW & SIZE ON BODY BRYMEC & SIZE ON COMPRESSION NUT

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Gate valve: 30813 – 15MM 30814 – 22MM 30815 – 28MM Lock shield Gate valve : 30700 – 15MM 30707 – 22MM 30299 – 28MM

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

2109066

Size:

30780 ∙ 15mm Brass Single Check Valve Compression 30781 ∙ 22mm Brass Single Check Valve Compression

Marking:

WRAS, BRYMEC, CR, size, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

30780 & 30781

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

2209064

Size:

see model

Marking:

Brymec logo, WRAS, size, flow arrow and CR on body

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

36366 ½” BSP (F) inlet/outlet 36367 ¾” BSP (F) inlet/outlet 36368 1” BSP (F) inlet/outlet 36369 1.1/4" BSP (F) inlet/outlet 36370 1½” BSP (F) inlet/outlet 36371 2” BSP (F) inlet/outlet

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to BS EN 1057. Maximum working pressure 16 bar. Maximum working temperature 99°C

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2210060

Size:

15MM, 22MM, 28MM, 35MM, 42MM, 54MM

Marking:

Brymec, EN1254 and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

30289 Solder ring coupler 15mm 30290 Solder ring coupler 22mm 30291 Solder ring coupler 28mm 30292 Solder ring coupler 35mm 30293 Solder ring coupler 42mm 30294 Solder ring coupler 54mm 30390 Solder ring reducing coupler 22mm x 15mm 30374 Fitting reducer 22mm x 15mm 30375 Fitting reducer 28mm x 15mm 30376 Fitting reducer 28mm x 22mm 30377 Fitting reducer 35mm x 15mm 30378 Fitting reducer 35mm x 22mm 30379 Fitting reducer 35mm x 22mm 30380 Fitting reducer 42mm x 15mm 30381 Fitting reducer 42mm x 22mm 30382 Fitting reducer 42mm x 28mm 30383 Fitting reducer 42mm x 35mm 30384 Fitting reducer 54mm x 22mm 30385 Fitting reducer 54mm x 28mm 30386 Fitting reducer 54mm x 35mm 30387 Fitting reducer 54mm x 42mm 30393 90° Street elbow 15mm 30394 90° Street elbow 22mm 30395 90° Street elbow 28mm 30320 90° elbow 15mm 30321 90° elbow 22mm 30322 90° elbow 28mm 30323 90° elbow 35mm 30324 90° elbow 42mm 30325 90° elbow 54mm 30331 45° elbow 15mm 30332 45° elbow 22mm 30333 45° elbow 28mm 30334 45° elbow 35mm 30335 45° elbow 42mm 30336 45° elbow 54mm 30345 Equal tee 15mm 30346 Equal tee 22mm 30347 Equal tee 28mm 30348 Equal tee 35mm 30349 Equal tee 42mm 30350 Equal tee 54mm 30423 Reducing tee 15mm x 15mm x 22mm 30424 Reducing tee 22mm x 15mm x 15mm 30425 Reducing tee 22mm x 15mm x 22mm 30426 Reducing tee 22mm x 22mm x 15mm Model name/s of secondary products 30427 Reducing tee 22mm x 22mm x 28mm 30429 Reducing tee 28mm x 15mm x 15mm 30430 Reducing tee 28mm x 15mm x 28mm 30431 Reducing tee 28mm x 22mm x 15mm 30432 Reducing tee 28mm x 22mm x 22mm 30433 Reducing tee 28mm x 22mm x 28mm 30434 Reducing tee 28mm x 28mm x 15mm 30435 Reducing tee 28mm x 28mm x 22mm 30436 Reducing tee 35mm x 35mm x 15mm 30437 Reducing tee 35mm x 35mm x 22mm 30438 Reducing tee 35mm x 35mm x 28mm 30439 Reducing tee 42mm x 42mm x 15mm 30440 Reducing tee 42mm x 42mm x 22mm 30441 Reducing tee 42mm x 42mm x 28mm 30442 Reducing tee 42mm x 42mm x 35mm 30449 Reducing tee 54mm x 54mm x 15mm 30443 Reducing tee 54mm x 54mm x 22mm 30446 Reducing tee 54mm x 54mm x 28mm 30447 Reducing tee 54mm x 54mm x 35mm 30448 Reducing tee 54mm x 54mm x 42mm 30359 End caps 15mm 30360 End caps 22mm 30361 End caps 28mm 30362 End caps 35mm 30363 End caps 42mm 30364 End caps 54mm

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company