Gessi S.p.A. Approvals


#2101351

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-out spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101351
Expiry date:
31/01/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R009 R090
Model:
60077
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2007359

Range of concealed bathroom boxes with extractable shower hoses. The inlet attached to the concealed box incorporates an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the shower hose also includes a stainless steel strainer. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2007359
Expiry date:
31/07/2025
Note:
Open outlet use only. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717. This approval does not include a shower handset. R007 applies to the hose installed prior to the shower hose (all models). R009 applies to the INCISCO 01813 model.
Size:
½” BSP (M)
Marking:
Gessi on outlet for shower hose.
Installation Requirements:
R001 R007 R009 R040
Model:
INCISO 01813 (lower side supply). INCISO 01814 (lateral side supply).
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2101305

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headworks, and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101305
Expiry date:
31/01/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connection with ½” BSP (F) adaptors.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
60071
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2101357

Floor mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with single lever operating member and a lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Both the shower outlet (from the main body) and the inlet to the shower handset incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0463 Combination Tap Assemblies
Section Subtitle:
Single Hole - Metal Single Outlet - Fixed - Lockable Diverter to Shower Outlet.
WRAS Approval Number:
2101357
Expiry date:
31/01/2026
Note:
The 38389 concealed base is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi on operating member.
Installation Requirements:
R001 R010 R040
Model:
24942 combination tap 38389 concealed base
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2103321

Range of shower handsets and overhead showers with metal chromium plated bodies with. Models 20123 and 15185 are fitted with check valves at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Model 20127 is supplied with a flexable hose connection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2103321
Expiry date:
31/03/2026
Note:
Open outlet use only R009 only applies to model 20127
Size:
See model.
Marking:
Gessi on back plate
Installation Requirements:
R001 R009 R040
Model:
15185 – ½” BSP (M) 20127 – ½” BSP (M) 20123 – ½” conical nut
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 17

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.