Gessi S.p.A. Approvals


#1912319

Sensor control unit, flow is controlled using a solenoid valve assembly and is activated via infra-red non touch operation. The Art 30622 model has an in-line spherical valve on each inlet, as well as an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection The Art 30629 & 33725 model is supplied with two angled isolation valves and two stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections, which are intended to connect to the tee piece installed prior to the solenoid valve. The tee piece inlets incorporate a combined washer and stainless steel strainer and an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1912319
Expiry date:
31/12/2024
Note:
R009 applies to the Art 30629 & 33725 model only.
Size:
See model
Marking:
Gessi logo on sensor plate.
Installation Requirements:
R001 R009 R010 R040
Model:
Art 30622 (sensor control unit) - ½” BSP (M). Art 30629 & 33725 (wall mounted sensor control unit) - ½” BSP (F).
Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2001343

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, single outlet, fixed.
WRAS Approval Number:
2001343
Expiry date:
31/01/2025
Note:
The concealed rough-in set 45089 is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi logo on spout back plate.
Installation Requirements:
R001 R010 R040
Model:
45089 rough in set (concealed body) to be installed with the following spouts and trim sets: Short Spout Models: 58390 – “L” lever short spout. 58393 – “X” lever short spout. Long Spout Models: 58392 – “L” lever long spout. 58394 – “X” lever long spout.
Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2001360

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001360
Expiry date:
31/01/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
Art.18601 VIA TORTONA Art.18602 VIA TORTONA
Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2003306

Shower set comprising of a shower handset, hose and holder, having chrome plated brass bodies. The shower handset and holder incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2003306
Expiry date:
31/03/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Gessi on rosette
Installation Requirements:
R001 R040
Model:
INCISO 58123
Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2003331

Wall mounted concealed two hole, single outlet (fixed) combination tap assembly (chromium plated brass) consisting of a built in part of the unit Art.38497 and external part Art.4482. Incorporating ceramic cartridge headwork and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed.
WRAS Approval Number:
2003331
Expiry date:
31/03/2025
Size:
½” BSP (F)
Marking:
Gessi on operating member.
Installation Requirements:
R001 R010 R040
Model:
Art. 38497 Incasso (built in) Art. 44827 Via Tortona (external)
Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 17

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.