Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet and hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007371

Expiry date:

31/07/2025

Note:

38389 concealed body (built-in part) is not approved in its own right.

Size:

½” BSP (F)

Marking:

Gessi on operating member

Installation Requirements:

R001 R030

Model:

24970 to be installed in conjunction with 38389 (concealed unit)

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Bath spout with a brass body (chromium plated). The spout outlet incorporates a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2009319

Expiry date:

30/09/2025

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Gessi, Emporio on back plate.

Installation Requirements:

R001 R040

Model:

38787

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Shower hose and handset with sliding rail and inlet kit. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2009327

Expiry date:

30/09/2025

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Gessi logo on handle on hand rail.

Installation Requirements:

R001 R040

Model:

47306

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010327

Expiry date:

31/10/2025

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Gessi logo on operating member.

Installation Requirements:

R001 R006 R010

Model:

18606

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Models 53003 and 53005 are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010351

Expiry date:

31/10/2025

Note:

No testing performed on the pop-up waste.

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Gessi on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

53003 53004 53005 53006

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company