‘FROSTI®-PLUS’ through wall, externally mounted, angled valve with a chromium plated gunmetal body and a non-rising spindle headwork with a dome type operating member. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1750 Taps

Section Subtitle:

Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.

WRAS Approval Number:

2301315

Expiry date:

31/01/2028

Note:

Claims of ‘frost-proof’ made by the manufacturer have not been verified by test and not considered covered under the scope of the approval.

Size:

5741101500: ½” BSP (M). 5771101500: 15mm copper pipe.

Marking:

Kemper on body.

Installation Requirements:

R001 R040 R030

Model:

5741101500 (with operating grip). 5771101500 (with socket wrench upper part).

Factor:

Gebr. Kemper GmbH + Co. KG

Company Name

Gebr. Kemper GmbH + Co. KG

Address

Harkortstr. 5 57462 Olpe Germany

Phone

+49(0) 27618910

General Email

info@kemper-olpe.de

View All Listings by this Company

Range of temperature measurement devices with bronze bodies and EPDM o-rings. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2306305

Expiry date:

30/06/2028

Size:

see model;

Marking:

Kemper logo, size and flow arrow on body

Installation Requirements:

R001

Model:

6280G0XX00. XX stands for 15, 20, 25, 32, 40 or 50 related to the dimension of the sensor (mm).

Manufacturer:

Gebr. Kemper GmbH + Co. KG

Company Name

Gebr. Kemper GmbH + Co. KG

Address

Harkortstr. 5 57462 Olpe Germany

Phone

+49(0) 27618910

View All Listings by this Company

Range of wall mounted hose untion taps with chrome plated brass body and spindle headwork with dome type operating member. Maximum operating pressure 10.0 bar. Cold water use only.

Section:

1780 Taps

Section Subtitle:

Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

240204040

Expiry date:

28/02/2029

Size:

½” BSP (M)

Installation Requirements:

R001 R040

Model:

5781101500 FROSTI® 5791101500 FROSTI®

Factor:

Gebr. Kemper GmbH + Co. KG

Company Name

Gebr. Kemper GmbH + Co. KG

Address

Harkortstr. 5 57462 Olpe Germany

Phone

+49(0) 27618910

General Email

info@kemper-olpe.de

View All Listings by this Company

Screw down stop valve with either gunmetal, stainless steel or brass bodies (see model), EPDM seals and ‘O’-rings and seal washer. 135020 prefix and 0731G0 prefix models have a drain port fitted with an EPDM ‘O’-ring. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

240404037

Expiry date:

30/04/2029

Size:

DN15 – 80 (see models)

Marking:

Kemper logo on body

Installation Requirements:

R001

Model:

135010XX00 - Flanged 135020XX00 - Flanged 1702G0XX00 - Male thread 171020XX00 - Female thread 1732G0XX00 - Male thread - (DN15 - 50) 1742G0XX00 – Male thread 190020XX00 – Female thread 191020XX00 – Female thread 0730G0XX00 – Male thread 0731G0XX00 – Male thread

Factor:

Gebr. Kemper GmbH + Co. KG

Company Name

Gebr. Kemper GmbH + Co. KG

Address

Harkortstr. 5 57462 Olpe Germany

Phone

+49(0) 27618910

General Email

info@kemper-olpe.de

View All Listings by this Company