Range of commercial and domestic ion exchange water softeners (salt regenerated). Operation is by an electronically controlled ion exchange resin filled plastic pressure vessel with integral salt cabinet (domestic models) or separate brine tank (commercial models). Maximum working pressure 8.0 Bar. Cold water use only.

Section:

2450 Water softeners

WRAS Approval Number:

1904071

Expiry date:

30/04/2024

Note:

R150 applies to domestic models. R160 applies to commercial models.

Size:

¾” BSP (M) inlet/outlet (VAK 6/10/15/25 models) 1” BSP (F) inlet/¾” BSP (M) outlet (HydroION VAS/VAD 25/50/75 C/CS 1 A B models) 1 ¼” BSP (M) inlet/outlet (HydroION VAS/VAD 125/150/200 C/CS 1.5 A B models) DN80 flange inlet/outlet (HydroION VAS/VAD 250/375/600 C/CS 2 A B models)

Marking:

Hydrotec logo, model and product info on label on body

Installation Requirements:

R001 R008 R150 R160 R170 R290 R415 R510

Model:

Domestic models: VAK 6/10/15/25. Commercial models (Simplex and Duplex): HydroION VAS/VAD 25/50/75 C/CS 1 A B, HydroION VAS/VAD 125/150/200 C/CS 1.5 A B, HydroION VAS/VAD 250/375/600 C/CS 2 A B.

Factor:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

View All Listings by this Company

Range of water conditioners incorporating Ball valves. TurboMAG models Simplex, Duplex Skid, Duplex Wall and Quadplex Skid incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

WRAS Approval Number:

2005025

Expiry date:

31/05/2025

Note:

Cold water use only.

Size:

See model

Marking:

Hydotec, model, size, pressure and operating info on label on body.

Installation Requirements:

R001 R120 R170 R290

Model:

TurboMAG Simplex - 1" BSP (M) TurboMAG Duplex Skid - 1.5" BSP (M) TurboMAG Duplex Wall - 1.5" BSP (M) TurboMAG Quadplex Skid - 2" BSP (M) TurboMAG Quadplex Vessel - DN50 Flanged.

Factor:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

View All Listings by this Company

‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework and EPDM ‘O’-rings. The product incorporates a water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2011085

Expiry date:

30/11/2025

Size:

1” BSP (M) inlet/outlet

Marking:

Hydrodos, WRAS, model number and serial number on adhesive label inside unit

Installation Requirements:

R001 R120 R160 R170 R415 R511 R575

Model:

HydroDOS HD550G

Factor:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

View All Listings by this Company