Zip Industries (Aust) Pty Ltd. Approvals


#2101052

Range of single hole, double outlet (fixed) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied). The spout outlet of ‘Arc’ models incorporates a plastic flow straightener. All models incorporate a separate vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature 100°C. Hot-water circuit has a maximum operating temperature of 65°C.

Section:
0480 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, fixed.
WRAS Approval Number:
2101052
Expiry date:
31/01/2026
Note:
Open outlet use only. No flow control device, ‘control centre’ or under-counter units are included as part of this approval. R160 applies to the sparkling water connection only.
Size:
6.35mm LLDPE pipe/ silicone flexible pipe ID 7.7mm x OD 10.95mm silicone flexible pipe ID 7.7mm x OD 10.95mm
Marking:
ZIP logo on top/base of tap
Installation Requirements:
R001 R006 R009 R010 R160
Model:
Chilled water only: SP91521 - G4 Classic Tap Only UK C. SP91589 - G4 Classic Tap Only UK C. SP91591 - G4 Classic Tap Only UK C. 91611 - HydroTap Wave Tap C. 91623 - HydroTap Classic Plus Tap C. Boiling water only: SP91517 - G4 Classic Tap Only UK B. SP91583 - G4 Classic Tap Only UK B. SP91585 - G4 Classic Tap Only UK B. 91607 - HydroTap Wave Tap B. 91619 - HydroTap Classic Plus Tap B. Boiling & ambient water: SP91518 - G4 Classic Tap Only UK BA. SP91586 - G4 Classic Tap Only UK BA. SP91588 - G4 Classic Tap Only UK BA. 91608 - HydroTap Wave Tap BA. 91620 - HydroTap Classic Plus Tap BA. Boiling & chilled water: SP91519 - G4 Classic Tap Only UK BC. SP91569 - G4 Classic Tap Only UK BC. SP91582 - G4 Classic Tap Only UK BC. 91609 - HydroTap Wave Tap BC. 91621 - HydroTap Classic Plus Tap BC. Boiling, chilled & sparkling water: SP91520 - G4 Classic Tap Only UK BCS. SP91566 - G4 Classic Tap Only UK BCS. SP91581 - G4 Classic Tap Only UK BCS. 91610 - HydroTap Wave Tap BCS. 91622 - HydroTap Classic Plus Tap. Chilled & sparkling water: SP91522 - G4 Classic Tap Only UK CS. SP91592 - G4 Classic Tap Only UK CS. SP91594 - G4 Classic Tap Only UK CS. 91612 - HydroTap Wave Tap CS. 91624-CS - HydroTap Classic Plus Tap BCS. Arc taps are available in the following variants: Boiling, chilled & sparkling water. Boiling & chilled water. Boiling & ambient water. Boiling only water. Chilled & sparkling water. Chilled water. 93621UK - G4 Arc. 93623UK - G4 Arc. 93624UK - G4 Arc. 94398UK - G4 Arc. 94400UK - G4 Arc. 94406UK - G4 Arc. 94410UK - G4 Arc. Boiling, chilled & sparkling water. Industrial HydroTap SP90887 - G4 Classic Industrial Top Touch Tap Only UK BC. Industrial HydroTap 90835 - G4 Classic Industrial 3 Button with Safety Side Touch Tap Only UK BC.
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#2304066

Range of boiling water dispensers incorporating plastic (3-7.5 litre models) or stainless steel (10-40 litre models) cisterns with silicone ‘O’-rings and seals. The flow to the internal reservoir is controlled via a float valve. The internal reservoir incorporates an overflow which acts a vent. The inlet incorporates a plastic filter. Water is dispensed using either a lever or push button (PLUS models only) operated self-closing tap. Maximum working pressure 5.0 bar. Maximum operating temperature 98°C. Cold supply only.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304066
Expiry date:
30/04/2028
Note:
R150 applies to 25 and 40 litre models. Where the overflow is directed away from the appliance for connection to a drain, this discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
15mm compression.
Marking:
Zip on casing and operating member. PN, ZIP Hydroboil (Hydroboil models only) and product information on adhesive label on underside of body.
Installation Requirements:
R001 R040 R150
Model:
403542 Zip Econoboil 3L, 405542 Zip Econoboil 5L, 403552 Zip Hydroboil 3L, 405552 Zip Hydroboil 5L, 407552 Zip Hydroboil 7.5L, 410552 Zip Hydroboil 10L, 415552 Zip Hydroboil 15L, 425552 Zip Hydroboil 25L, 440552 Zip Hydroboil 40L, 403562 Zip Hydroboil Plus 3L, 405562 Zip Hydroboil Plus 5L, 407562 Zip Hydroboil Plus 7.5L.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#2306067

‘G5 BC’ range of command centres that provide instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306067
Expiry date:
30/06/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection
Marking:
Zip and Hydrotap on body. ZIP, model and maximum pressure and technical information on adhesive label on inside of body.
Installation Requirements:
R001 R007 R008 R009 R040 R150 R170
Proviso:
The non ‘NS’ suffix models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50084000UKNS: G5 BC Home M, H50002000UKNS: G5 BC20 M (with or without booster), H50004000UKNS: G5 BC60 M (with or without booster), H50084000UK: G5 BC Home M, H50002000UK: G5 BC20 M (with or without booster), H50004000UK: G5 BC60 M (with or without booster). Command Centre UK HydroTap Venturi models: H50092000UKNS: G5 BC Home H, H50021000UKNS: G5 BC20 H (with or without booster), H50023000UKNS G5 BC60 H (with or without booster), H50092000UK: G5 BC Home H, H50021000UK: G5 BC20 H (with or without booster), H50023000UK G5 BC60 H (with or without booster).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#2306068

‘G5 BCS’ range of command centres that provide instant near boiling, sparkling and chilled water (all filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products incorporate a pressure reducing valve (adjustable outlet pressure between 2.25 and 2.75 bar) on the supply to the carbonator unit. The carbonator inlet incorporates a non-return valve. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum inlet supply pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306068
Expiry date:
30/06/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on body. Serial number containing date of manufacture (YYYY/MM/DD) and manufacturing code on adhesive label inside cover.
Installation Requirements:
R001 R007 R008 R009 R040 R160 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50083000UK - G5 BCS Home M, H50060000UK - G5 BCS20 M (with or without booster), H50062000UK - G5 BCS60 M (with or without booster). Command Centre UK HydroTap Venturi models: H50090000UK - G5 BCS Home H, H50074000UK - G5 BCS20 H (with or without booster), H50075000UK - G5 BCS60 H (with or without booster).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval


#2306069

‘G5 BCU60 UV’ Command centre that provides instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combinations of solenoid valves and electronic pumps to the outlets. A UV unit is incorporated on the outlet from the chilled water tank. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306069
Expiry date:
30/06/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on front face of unit.
Installation Requirements:
R001 R007 R008 R008 R040 R0150 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
H500U2000UK: G5 BCU60 UV Command Centre UK HydroTap
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.