Range of multistage vetical water pumps with stainless steel bodies and impellers incorporating EPDM ‘o’ rings and seals. With various nominal flow rates depending on number of impellers and inlet connection size. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1910306

Expiry date:

31/10/2024

Marking:

WILO on pump body.

Installation Requirements:

R001 R415

Model:

MVIS Nominal flow rate - 2 m3/h with 2 to 10 impellers – inlet connection 1 1/4” BSP(F), 4 m3/h with 2 to 10 impellers – inlet connection 1 1/4” BSP(F) 8 m3/h with 2 to 6 impellers – inlet connection 2” BSP(F) The product name of the MVIS range for which approval is sought is built as: Example :MVIS403-1/16/K/3-400-50-2 Where: ‘4’ Nominal flow (m3/h) (other possible values are 2 and 8) ‘03’ Number of Impeller (other posible values see table above)) ‘-1’ Pump housing in stainless steel AISI 304 ‘/16’ Maximal pressure (bar) ‘/K’ EPDM material for O ring ‘/3-400-50-2’ Motor definition : Three phases 400 Volts-50 HZ 2poles MVISE range Nominal flow rate - 2 m3/h with 6 an 10 impellers – inlet connection 1 1/4” BSP(F), 4 m3/h with 4,6 and 10 impellers – inlet connection 1 1/4” BSP(F) 8 m3/h with 3 and 6 impellers – inlet connection 2” BSP(F) The product name of the MVIS range for which approval is sought is built as: Example :MVISE210-1/16/K/3-2-3G Where: ‘2’ Nominal flow (m3/h) (other possible values are 2 and 8) ‘10’ Number of stage (other posible values see table above) ‘-1’ Stainless steel AISI 304 ‘ /16’ Maximal pressure (bar) ‘/K’ EPDM material ‘/3-2-3G’ 3 phases 2 poles third generation of converter

Factor:

Wilo SE

Company Name

Wilo SE

Address

Werk Hof, Heimgartenstr. 1-3, 95030 Hof/Saale

View All Listings by this Company

Manufacturer:

Wilo Salmson France

Company Name

Wilo Salmson France

Address

80 Boulevard de l'Industrie CS 90527 F-53005 LAVAL Cedex

Phone

+33 2 43 59 54 00

View All Listings by this Company

Range of multistage horizontal water pumps with stainless steel bodies and impellers incorporating EPDM ‘O’-rings and seals. With various nominal flow rates depending on number of impellers and inlet connection size. Maximum working pressure 10.0 bar. Cold Water Use Only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2004352

Expiry date:

30/04/2025

Note:

Claims for flow rate are made by the manufacturer and not considered part of the listing.

Size:

1” BSP (F) suction x 1 1/4” BSP (F) delivery with 2 (m³/h) impeller(s) and 2-7 stages. 1” BSP (F) suction x 1” BSP (F) delivery with 4 (m³/h) impeller(s) and 2-7 stages. 1¼” BSP (F) suction x 1” BSP (F) delivery with 6 (m³/h) impeller(s) and 2-5 stages. 1½” BSP (F) suction x 1¼” BSP (F) delivery with 10 (m³/h) impeller(s) and 2-5 stages. Size added March 2021: 2” BSP (F) suction x 1 1/2” BSP (F) delivery with 16 (m³/h) impeller(s) and 2-5 stages.

Marking:

WILO, data label, model and other technical information on body.

Installation Requirements:

R001 R415

Model:

MEDANA CH1-L range: Model code example: MEDANA CHl-L.1002-1/E/A/10T Where: MEDANA CH1-L. = Multistage, non self-priming, Horizontal high-pressure centrifugal pump in off-line design with glandless pump motor 10 = Nominal flow (m3/h) (other possible values are 2,4 and 6) 02 = Number of impellers (other possible values see table above - stages) -1 = pump body material: stainless steel AISI 304 (other possible value is: -2 stainless steel AISI 316L) /E = EPDM material for O'ring and bellows /A = Motor definition: Three phases 400 Volts-SO HZ 2 poles (other possible values are B, C, D, E, F,G and I) • /10T = 10 = Maximum pressure (bar); T=threaded connection

Factor:

Wilo SE.

Company Name

Wilo SE.

Address

Nortkirchenstraße 100, 442363, Dortmund

View All Listings by this Company

Manufacturer:

Wilo Salmson France

Company Name

Wilo Salmson France

Address

80 Boulevard de l'Industrie CS 90527 F-53005 LAVAL Cedex

Phone

+33 2 43 59 54 00

View All Listings by this Company

Helix range of vertical stainless steel multistage pumps with various pump housing materials depending on pump configuration. Maximum working pressure 30.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2006300

Expiry date:

30/06/2025

Size:

DN50 - DN80

Marking:

Wilo on body.

Installation Requirements:

R001 R415

Model:

Helix V, Helix VE, Helix Excel ranges.

Factor:

Wilo SE

Company Name

Wilo SE

Address

Werk Hof, Heimgartenstr. 1-3, 95030 Hof/Saale

View All Listings by this Company

Manufacturer:

Wilo Salmson France

Company Name

Wilo Salmson France

Address

80 Boulevard de l'Industrie CS 90527 F-53005 LAVAL Cedex

Phone

+33 2 43 59 54 00

View All Listings by this Company