Range of wall mounted thermostatic shower panels. Incorporates a single sequential headwork which controls the flow and temperature using a single lever operating member to a fixed riser rail shower hose and handset. The inlet incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with stainless steel strainers, flow restrictors and isolation valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2104925

Size:

15mm compression

Marking:

Twyford Logo (Brand of Geberit) on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2026

Model:

SF1211CP

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of dual flush WC outlet valves. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold Water Use

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2307336

Size:

2” BSP (M) Inlet.

Marking:

Geberit Laser etched on the body.

Installation Requirements:

R001 R571 R581

Expiry date:

31/07/2028

Model:

Geberit Type 260 826.470.00.0 - standard version & Geberit Type 260 826.485.00.0 - short version.

Product Images

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2309927

Size:

Model SF1120CP & SF1140CP 10mm copper tails Model SF1138CP Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Model, Twyford & date of manufacture (MM/YY) on body. Twyford on operating member.

Installation Requirements:

R001 R006

Expiry date:

30/09/2028

Model:

SF1120CP, SF1140CP & SF1138CP

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Screw down stop valve, with brass body, HDPE seat and handwheel operating members. Maximum working pressure 10 bar. Cold water use only.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2401800

Size:

½” BSP (M)

Marking:

Geberit & technical Info on handwheel.

Installation Requirements:

R001

Expiry date:

31/01/2029

Model:

240.269.00.1 - with handwheel (manufacturing code 883.660.00.0)

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312363

Size:

16mm – 75mm.

Marking:

Geberit & size on fittings. Geberit, size, model & material on pipes.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Manufacturer:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company