Methven UK Limited Approvals


#2101319

Range of single hole, single outlet, (swivel) combination tap assemblies incorporating brass bodies (chromium plated) and quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101319
Expiry date:
31/01/2026
Size:
Stainless steel braided PEX lined hoseassembly incorporating ½” captive nut end connections.
Marking:
Deva on body. DTC53 (brand of Methven) on rear of the body.
Installation Requirements:
R001 R006 R009 R010
Model:
PTN104 & WTN104 Walton Mono Kitchen Sink Mixer. Preston Mono Kitchen Sink Mixer. Model added September 2023: MAL104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2101340

Range of wall or ceiling mounted shower arms with brass bodies (various finishes). Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2101340
Expiry date:
31/01/2026
Note:
Open outlet use only.
Size:
½” BSP (M) x ½” BSP (F).
Marking:
Methven on shower arm body.
Installation Requirements:
R001 R040
Model:
Ceiling mounted shower arms: ARMC05xx (200mm). ARMC06xx (300mm). ARMC07xx (500mm). Wall mounted shower arm: ARMW06xx (400mm). Where xx denotes finish and is replaced with: CP = Chrome plated. BK = Matt black plated. BB - Brushed brass plated. BN - Brished nickel plated. GM = Gun metal plated.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2101001

Range of overhead shower heads and arms incorporating brass or ABS body. The inlet of models KSAB4K and HEAH06BK incorporates a stainless-steel strainer and plastic flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2101001
Expiry date:
31/01/2026
Note:
Open outlet use only.
Size:
Please refer to model.
Marking:
DTC15 (brand of Methven) and DEVA on ball joint nut (models KSACP, HEAH06 & HEAH06B). Methven on shower face plate (models KSABK, KSA4BK & HEAH06BK).
Installation Requirements:
R001 R040
Model:
½” BSP (M): KSACP, KSABK & KSA4BK. ½” BSP (F): HEAH06. HEAH06B & HEAH06BK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011093

Range of shower outlets with chromium plated bodies with check valves fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum operating temperature 70°C. Open outlet use only. From July 2023 can also be supplied without the check valve at the inlet.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011093
Expiry date:
30/11/2025
Size:
½” BSP male
Marking:
DEVA on body.
Installation Requirements:
R001 R040
Model:
HANS15 SHOWER OUTLETS Models added June 2024: HANS15BB & HANS15BK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009060

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator and the product is supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2009060
Expiry date:
30/09/2025
Note:
No testing performed on pop-up waste. Open outlet use only.
Size:
Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:
DTC 56 on waste operating member
Installation Requirements:
R001 R576
Model:
PUW206, PUW206/105, PUW206/BK, PUW206/BN, PUW206/BB & PUW206/GM COMBINED BATH FILLERS AND OVERFLOWS
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2103305

Range of shower kits incorporating a chrome plated plastic shower handset, shower hose and riser rail. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2103305
Expiry date:
31/03/2026
Note:
Open outlet use only.
Size:
½” Captive nut.
Marking:
Deva on handset
Installation Requirements:
R001 R040
Model:
SIGKITS01 – core single function showetr kit KITM03 – Multifunction shower kit SIGKITM02 – Substance 3 function signature shower kit SIGKITM04 – Sene 5 function signature shower kit
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2011352

Shower kit consisting of a shower hose, handset and raiser rail (EKIT01/A model) or shower handset only (AIR1HSCPWHUK model). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011352
Expiry date:
30/11/2025
Note:
Open outlet use only.
Size:
See model.
Marking:
Methven on shower handset.
Installation Requirements:
R001 R040
Model:
EKIT01/A: ½” BSP (F). AIR1HSCPWHUK: ½” BSP (M).
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2010096

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members incorporates plastic aerators supplied with a pop-up waste. Maximum working Pressure 10.0 bar. Maximum operating temperature 65ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010096
Expiry date:
31/10/2025
Note:
R160 applies to the waterfall outlets only.
Size:
Stainless Steel braided, PEX lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010 R160
Model:
SAVV2113UE COMBINATION TAP ASSEMBLIES
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2104316

Range of wall mounted thermostatic bar type mixing valves incorporating chrome plated brass bodies, ceramic disc headwork with dome type operating members controlling the flow. The temperature is independently controlled by a thermostatic cartridge with dome type operating member which incorporates a manual override button.The inlets incorporate stainless-steel strainers and an approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104316
Expiry date:
30/04/2026
Size:
¾" BSP captive nut inlets x ½" BSP (M) offset union.
Marking:
DTC37 (brand of Methven) and DEVA on body. Deva logo on handset.
Installation Requirements:
R001
Model:
KESCTS NIACTS
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2104323

Three hole, single outlet (swivel) combination tap assembly with brass body (various finishes) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, swivel.
WRAS Approval Number:
2104323
Expiry date:
30/04/2026
Size:
½” BSP (M)
Marking:
Methven and DTC53 (brand of Methven) on spout
Installation Requirements:
R001 R006 R010
Model:
MT3BFXX Where xx denotes finish and is replaced with: CP = Chrome plated. BK = Matt black plated. BB - Brushed brass plated. BN - Brished nickel plated. GM = Gun metal plated.
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2104905

Range of deck mounted thermostatic shower mixers with brass bodies (chrome plated), incorporating ceramic disc headworks with dome type operating members controlling the flow and a lockable self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Spout outlet incorporates a plastic flow straightener. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. Model DYN106 is supplied with a shower hose and shower handset, all other models are supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
2104905
Expiry date:
30/04/2026
Note:
DYN106NK is not supplied with shower hose, handset or riser rail assembly.
Size:
¾” BSP (M)
Marking:
Methven on top of body (models TLVBSM1B & TLVEFLF2) DEVA (brand of Methven) on top of body (models DYN106 & DYN106/1B) DTC53 (brand of Methven) of rear of body.
Installation Requirements:
R001
Model:
TLVBSM1B TLVEFLF2 DYN106 DYN106/1B Model added November 2022: IHTLVEFLF2 Model added January 2023: DYN106NK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009318

Range of two hole, metal single outlet (fixed) combination tap assemblies (various finishes). Incorporating either quarter turn ceramic disc or non-rising headwork with various operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the product is supplied with plastic or metal backnuts, hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2009318
Expiry date:
30/09/2025
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R005 R030
Model:
186X DCM106 DCM106/501 SOLE106 MILAN 106 MILAN106/HSR8 DLT106 DLT SPEC106 VW DLT106 Shower hose 2207341 added to all existing models 05/07/2023
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2106045

Range of chromium plated brass interlocked shower hoses incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2106045
Expiry date:
30/06/2026
Note:
Open outlet use only.
Size:
½” BSP Captive nut inlet x outlet.
Marking:
WRAS, DTC15 and date of manufacture YY ON CONICAL NUT
Installation Requirements:
R001
Model:
HOS1.5CPS01, HOS1.5CPS01/G & D50010014 SHOWER HOSES
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2107308

Shower fixing kit for bar shower valves with stainless steel decorative cover. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2107308
Expiry date:
31/07/2026
Size:
15mm compression
Marking:
DTC64 (brand of Methven) on body.
Installation Requirements:
R001 R040
Model:
SPE11 Model added December 2022: IHSPE11
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2109374

Range of overhead shower outlets incorporating a stainless steel body (various finishes), strainer and flow regulator on the inlets. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2109374
Expiry date:
30/09/2026
Size:
½” BSP (M)
Marking:
Methven on body. DTC15 on inlet
Installation Requirements:
R001 R040
Model:
HEAH08XX HEAH09XX HEAH10XX HEAH11XX The ‘XX’ denotes the surface finish and is replaced by: CP = Chrome plated BK = Matte Black Plated GM = Gun Metal Plated BB = Brushed Brass Plated BK = Brushed Nickel Plated
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2109364

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and pull-down spray handset. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109364
Expiry date:
30/09/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
DTC15 on rear of body. Deva on operating member.
Installation Requirements:
R001 R009 R090
Model:
SLINKY118 slinky mono sink mixer
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2110318

Range of wall mounted spout outlets incorporating brass bodies (various finishes) & plastic aerators. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2110318
Expiry date:
31/10/2026
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Methven on back plate or spout.
Installation Requirements:
R001 R040
Model:
WSP01XX WSP02XX WSP03XX WSP04XX WSP05XX WSP06XX WSP07XX WSP08XX Where xx denotes finish and is replaced with: CP = Chrome plated. BK = Matt black plated. BB - Brushed brass plated. BN - Brished nickel plated. GM = Gun metal plated.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2110347

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate an plastic aerator. The fitting is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2110347
Expiry date:
31/10/2026
Size:
¾” BSP (M)
Marking:
DTC53 (brand of Methven) on rear of body Methven on front of body
Installation Requirements:
R001 R006 R010
Model:
MTBFXX – Motu Bath Filler TMBFXX – Tasman Bath Filler Where XX denotes finish can be replaced with: CP – Chrome plated BK – Matte black BB – Brushed Brass GM – Gun metal BN – Brushed nickel
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2109315

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks, single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightner. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2109315
Expiry date:
30/09/2026
Size:
¾” BSP (M)
Marking:
Methven on operating member. DTC15 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R020
Model:
KEBSMCPUK – Kea Bath Shower Mixer
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2110376

Four hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc head work with single lever operating members (model WAI4BSMXX) and self cancelling diverter to shower outlet. The fitting is supplied with Stainless steel braided PEX lined flexible connecting hoses. The spout outlets incorporate a plastic aerator. Product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Multi - hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2110376
Expiry date:
31/10/2026
Marking:
DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R030
Model:
WAI4BSMXX Where XX denotes finish and can be replaced with: CP - Chrome plated BB – Brushed brass plated BK – Matte black plated BN – Brushed nickel plated GM – Gunmetal plated
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 13

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.