Methven UK Limited Approvals


#2306077

Range of shower handsets & overhead shower outlets with chromium plated plastic body. The inlets of the overhead shower outlets incorporate a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2306077
Expiry date:
30/06/2028
Note:
Open outlet only
Size:
½” BSP M & ½” BSP F
Marking:
Deva on body
Installation Requirements:
R001 R040
Model:
HANM12
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2305350

Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products can consist of quarter turn ceramic disc or detent headworks, two-way diverter cartridges and a thermostatic cartridges (see models). All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2305350
Expiry date:
31/05/2028
Size:
¾” BSP (F)
Marking:
DEVA on faceplate
Installation Requirements:
R001 R010 R040
Model:
Thermostatic cartridge & 1,2 or 3 detent headworks AST1D & AST2D
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2305081

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305081
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to models
Marking:
Deva, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
Carbon Block/Scale Inhibitor models: FILTER 001 10” 1 micron: ¼” push fit
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2301088

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Products are supplied with a shower hose and handset and plastic backnuts. Maximum working pressure 6.0 Bar.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2301088
Expiry date:
31/01/2028
Size:
¾” BSP (M).
Marking:
DTC 59 on back of body
Installation Requirements:
R001 R020
Model:
VR106 VL106 ALT106 POR106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2301089

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc (VL101) or non-rising spindle headworks (all other models) with various operating members and metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2301089
Expiry date:
31/01/2028
Size:
½” BSP (M).
Marking:
DTC 59 on body.
Installation Requirements:
R001 R005
Model:
VR101– Dome Type, VL101 – Single Lever, Models Added September 2023 ALT101 & POR101 Models Added October 2023 VER101 Models added December 2023 TU101
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2301090

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc (VL103) or non-rising spindle headworks (all other models) with various operating members and metal backn uts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 6.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2301090
Expiry date:
31/01/2028
Size:
½” BSP (M).
Marking:
DTC 59 on body.
Installation Requirements:
R001 R006
Model:
VR103 – Dome Type, VL103 – Single Lever, Models added September 2023: ALT103 - Dome Type POR103 - Single Lever.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2212103

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a quarter turn ceramic disc (model VL113) or a non-rising spindle headwork (models VR113) with lever, cross top or dome type operating members. The spout outlets incorporate a flow straightener. Maximum working pressure 6.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2212103
Expiry date:
31/12/2027
Size:
M10x1 (F)
Marking:
DTC 59 on body
Installation Requirements:
R001 R006 R010
Model:
VR113 & VL113 Model added September 2023: ALT113 Models added October 2023: VER113 Model added December 2023 TU113
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906169

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks that control both flow and temperature with single lever operating members. The spout outlets incorporate plastic aerators and the products are supplied with a click type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906169
Expiry date:
30/06/2024
Note:
No testing performed on click type waste
Size:
Stainless Steel braided, EPDM lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA on operating member. DTC 53 on body
Installation Requirements:
R001 R006 R010
Model:
ETH113BK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1912085

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge or ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912085
Expiry date:
31/12/2024
Size:
Stainless steel PEX lined hose assemblies with ½” BSP captive nut end connections
Marking:
DTC53 ON REAR OF BODY. DEVAN ON FRONT OF BODY.
Installation Requirements:
R001 R006 R010
Model:
CAR104, CAR104BC, CAR104BK, CAR104BB & CAR104CO
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2110138

Shower handset with plastic bodies (chrome plated). Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2110138
Expiry date:
31/10/2026
Note:
Open outlet use only
Size:
Handsets: ½" BSP (M). Overhead Showers: ½" BSP (F).
Marking:
DEVA on body.
Installation Requirements:
R001 R040
Model:
HANDSET P
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2309307

Range of two-hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members and manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the products are supplied with metal backnuts, a shower handset and hose assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
2309307
Expiry date:
30/09/2028
Size:
¾” BSP (M)
Marking:
DTC53 and Deva etched on tap body.
Installation Requirements:
R001 R006 R020
Model:
INS106 MOT106 Model added November 2023: IBK106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2309311

2D & 3D range of thermostatic blending valves (brass bodies – various finishes) incorporating a 2 way diverter with 2 models having an additional diverter control to shower outlet. The products include various operating members and faceplates. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however it has not been fully tested to demonstrate it provides adequate backflow protection. Available without or with in-wall fixing box Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2309311
Expiry date:
30/09/2028
Size:
½” BSP (F)
Marking:
Methven etched on face plate
Installation Requirements:
R001 R010 R040
Model:
AIO 2D AIO 2DBK KAHA 2D KAHA 2DA KAHA 2DBB KAHA 2DBK KAHA 2DBN KAHA 2DGM KIRI 2D KIRI 2DA KIRI 2DBB KIRI 2DBK KIRI 2DBN KIRI 2DGM TUROA 2D VALVE 2D KAHA 3D KAHA 3DA KAHA 3DBB KAHA 3DBK KAHA 3DBN KAHA 3DGM KIRI 3D KIRI 3DA KIRI 3DBB KIRI 3DBK KIRI 3DBN KIRI 3DGM VALVE 3D
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906407

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906407
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Deva on operating member DTC 53 on body
Installation Requirements:
R001 R006 R010
Model:
WEX113
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906408

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 10.0 bar incorporates a plastic flow straightener and have a maximum operating temperature of 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906408
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Deva on operating member DTC 53 on body
Installation Requirements:
R001 R006 R009 R010
Model:
WEX313
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1909436

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn rising ceramic disc headworks, single lever operating members and lockable diverter to shower outlet. The spout outlet incorporates a plastic flow straightener Supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1909436
Expiry date:
30/09/2024
Size:
¾” BSP (M)
Marking:
Deva & DTC 53 on body.
Installation Requirements:
R001 R006 R020
Model:
WEX106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1912088

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge or ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912088
Expiry date:
31/12/2024
Size:
Stainless steel PEX lined hose assemblies with ½” BSP captive nut end connections
Marking:
Deva & DTC 53 on of body
Installation Requirements:
R001 R006 R010
Model:
LBN104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2310335

Shower handset, chrome plated plastic incorporating EPDM ‘O’-rings.. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2310335
Expiry date:
31/10/2028
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Deva on shower handle
Installation Requirements:
R001 R040
Model:
HANM04
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2310341

Wall mounted manual blending valve, (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever type operating member. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2310341
Expiry date:
31/10/2028
Size:
15mm compression
Marking:
Deva and DTC 59 operating member and body.
Installation Requirements:
R001 R010 R040
Model:
STNVMAN
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2310923

Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with shower kits consisting of a shower hose, handset & a riser rail assembly. Maximum working pressure 5.0 Bar Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2310923
Expiry date:
31/10/2028
Size:
15mm Compression
Marking:
Model KSBS01: Valve – DTC & DEVA on body. Shower Kit – DEVA on handset. Model GRBS01: Valve – DTC64 on rear of body Hose – DTC15, WRAS & date of manufacture (YY) on conical nut. Handset – Deva on body.
Installation Requirements:
R001 R010 R040
Model:
KSBS01 & GRBS01
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2310924

Shower kit comprising of a shower hose, handset and riser rail assembly.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2310924
Expiry date:
31/10/2028
Note:
Open outlet use only.
Size:
½” BSP (F) Conical nut
Marking:
Shower Hose DTC15, WRAS and date of manufacture (YY) on conical nut. Shower Handset Deva on Body
Installation Requirements:
R001 R040
Model:
KITM08
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2106056

Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with various operating members (see models). Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2106056
Expiry date:
30/06/2026
Note:
This approval does not include a shower hose and handset or overhead shower outlet.
Size:
¾” BSP (F)
Marking:
DEVA logo on trim set.
Installation Requirements:
R001 R010 R040
Model:
Single lever operating members: INS1D, Single lever operating members for flow control, cross top operating members for thermostatic cartridge: INS2D
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2310338

Wall mounted, two hole, single outlet, fixed combination tap assembly (chromium plated brass body). Flow is controlled between the spout outlet and overhead shower by a 2 way ceramic disc diverter with a dome type operating member. Temperature is controlled via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The spout outlet turns 90 degrees to divert the flow to a further shower outlet. The spout outlet incorporates a plastic aerator. The inlets incorporate a stainless steel strainers and approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset that incorporates a plastic flow regulator, overhead shower that incorporates a flow regulator and stainless steel strainer washer and riser rail assembly. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2310338
Expiry date:
31/10/2028
Size:
15mm compression.
Marking:
Deva and DTC 53 on body.
Installation Requirements:
R001 R020
Model:
RTSDBSP
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2310340

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2310340
Expiry date:
31/10/2028
Size:
¾” BSP (M).
Marking:
Deva and DTC 53 on body.
Installation Requirements:
R001 R006 R010
Model:
ZON108
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2311355

Range of two-hole, single outlet (fixed) combination tap assemblies, (chromium plated brass bodies), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2311355
Expiry date:
30/11/2028
Size:
¾” BSP (M)
Marking:
Deva operating member and DTC53 on body.
Installation Requirements:
R001 R005 R010
Model:
CLF108 - Clifden Bath Filler PSA108 - PISA Bath Filler
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2306343

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a dome type operating member and a manual override button. Each inlet incorporates a combined NBR washer and stainless steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a self cancelling diverter to shower outlet and a plastic flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2306343
Expiry date:
30/06/2028
Note:
This approval does not include a shower hose and handset.
Size:
¾” captive nut.
Marking:
Models AVTBSMWMBO, TLVBSMWMBO – DTC53 on rear and Methven on front of valve. Model DYN106 B.O. – DTC53 on rear and Deva on front of valve.
Installation Requirements:
R001 R020
Model:
DYN106 B.O TLVBSMWMBO AVTBSMWMBO
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2311079

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc (VL102 & POR102) and single lever operating member or non-rising spindle headworks (all other models) with dome or cross top operating members and metal back nuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 Bar. Non-metallic materials and components comply with BS6920 at 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2311079
Expiry date:
30/11/2028
Size:
¾” BSP (M)
Marking:
DTC 59 on rear of tap body.
Installation Requirements:
R001 R040
Model:
VR102, ALT102, VL102, POR102 & VER102 Model added December 2023 TU102
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2305355

Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products consist of two-way diverter cartridges and a thermostatic cartridges. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2305355
Expiry date:
31/05/2028
Size:
¾” BSP (F)
Marking:
Methven on faceplate & DTC53 on the valve.
Installation Requirements:
R001 R010 R040
Model:
Thermostatic cartridge & two-way diverter CM2D CM2DBK CM2DBB Models Added February 2024 CM2DBB CM3D CM3DBK CM3DBB WA2D WA2DBK WA3D WA3DBK
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1912090

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge or ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912090
Expiry date:
31/12/2024
Size:
Stainless steel PEX lined hose assemblies with ½” BSP captive nut end connections
Marking:
DTC53 on rear and deva on front of body.
Installation Requirements:
R001 R006 R010
Model:
OTL104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2312901

Range of wall mounted thermostatic bar shower mixers, (chrome plated brass bodies), incorporating half turn ceramic disc headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. The products are supplied with shower kits that consist of a shower hose, handset and riser rail assembly. Maximum working pressure 10.0Bar Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2312901
Expiry date:
31/12/2028
Size:
¾” BSP (F) x 15mm compression
Marking:
AVCTS Valve – DTC64 on rear of body. Methven on front of body. Shower kit – Methven on shower handset. AVCTSLF Valve DTC64 on rear of body. Methven on front of body. Shower kit – Methven on handset. DTC 15, WRAS & year of manufacture (YY) on conical nut.
Installation Requirements:
R001 R010 R040
Model:
AVCTS & AVCTSLF
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2312336

Wall mounted, thermostatic shower valves, (chrome plated brass body), incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. Maximum working pressure: 10.0 bar Maximum operating temperature: 65°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2312336
Expiry date:
31/12/2028
Size:
15mm compression
Marking:
Deva on operating member
Installation Requirements:
R001 R010 R040
Model:
CLNCON
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2210379

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210379
Expiry date:
31/10/2027
Size:
½” BSP (M)
Marking:
DTC53 on rear and Deva on front of body.
Installation Requirements:
R001 R006 R010
Model:
ADORE305
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240104009

Range of pillar taps, (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members and plastic flow straighteners. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
240104009
Expiry date:
31/01/2029
Size:
½” BSP (M)
Marking:
Deva and DTC53 on body.
Installation Requirements:
R001 R006
Model:
INS102 IBK102 MOT102
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240104011

Concealed wall mounted thermostatic blending valve, (brass body – chrome trim set), incorporating quarter turn ceramic disc headworks with single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. The inlets incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
240104011
Expiry date:
31/01/2029
Size:
¾” BSP (F)
Marking:
Methven on face plate
Installation Requirements:
R001 R010 R050
Model:
AV2D2
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240104010

Range of pillar taps, (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates plastic flow straighteners. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
240104010
Expiry date:
31/01/2029
Size:
½” BSP (M)
Marking:
Deva on operating member, DTC53 on body. Model (AVBTCP) Methven on operating member, DTC53 on body.
Installation Requirements:
R001 R006
Model:
IBK101 INS101 MOT101 Models added May 2024: INS101-4 AVBTCP
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240104021

Pillar tap, (chrome plated brass body) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporates plastic flow straighteners. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
240104021
Expiry date:
31/01/2029
Size:
½” BSP (M)
Marking:
Deva on operating member, DTC53 on body.
Installation Requirements:
R001 R005
Model:
PSA101 Model added April 2024 CLF101
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2312333

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerators. The product incorporates a manual diverter and is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2312333
Expiry date:
31/12/2028
Note:
This product is supplied with a hose and handset.
Size:
¾” BSP (M).
Marking:
Methven and DTC53 on body.
Installation Requirements:
R001 R006 R020
Model:
AMBSMCPUK - Amio Bath Shower Mixer, AMBSMBK - Amio Bath Shower Mixer Matte Black, ALBSMBK - Amio Bath Shower Mixer Matte Black, ALBSMCP - Albany Bath Shower Mixer.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2106059

Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with various operating members (see models). Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2106059
Expiry date:
30/06/2026
Note:
This approval does not include a shower hose and handset or overhead shower outlet.
Size:
¾” BSP (F)
Marking:
DTC on valve & Methven on faceplate
Installation Requirements:
R001 R010 R040
Model:
Single outlet models: Dome type operating members: WA1D WA1DBK Single lever operating members: CM1D CM1DBK CM1DBB
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240102080

Range of two-hole, single outlet (fixed) combination tap assemblies, (Chrome plated brass bodies) incorporates quarter turn ceramic disc headworks with single lever operating members and the spout incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 6.0 Bar Maximum operating temperature 65.0°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
240102080
Expiry date:
31/01/2029
Size:
¾” BSP M
Marking:
DTC 59 on rear of tap body
Installation Requirements:
R001 R010 R040
Model:
VL108
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2303075

Range of two-hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating non-rising spindle headworks with dome type operating members. Model (VL105) incorporates a quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 6.0 Bar Maximum operating temperature 65.0°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303075
Expiry date:
31/03/2028
Size:
1/2" BSP (M)
Marking:
DTC 59 on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
VR105 ALT105 VL105
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240102081

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies. Incorporates a non-rising spindle headworks with dome type operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal back nuts. Maximum working pressure 6.0 Bar. Maximum operating temperature 65.0°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
240102081
Expiry date:
31/01/2029
Size:
¾” BSP M
Marking:
DTC 59 on rear of of tap body.
Installation Requirements:
R001 R005 R010
Model:
VR108
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240204045

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240204045
Expiry date:
28/02/2029
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DEVA on operating member, DTC 53 on rear of body
Installation Requirements:
R001 R006 R010
Model:
PSA171 - PISA Sink Mixer CLF171 - Clifden Sink Mixer Models added March 2024: PSA171-6 - PISA Sink Mixer - 6LPM CLF171-6 - Clifden Sink Mixer - 6LPM
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240204046

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks, with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240204046
Expiry date:
28/02/2029
Size:
Stainless Steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Deva on operating member DTC 53 on rear of body.
Installation Requirements:
R001 R006 R010
Model:
CLF113 – Clifden PSA113 – PISA
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009351

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener . Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009351
Expiry date:
30/09/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
DTC32A (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Model:
SW1
Factor:
COMMERCIALWARE LTD
Company Name
COMMERCIALWARE LTD
Postcode
PR8 6NA

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2312386

Range of shower handsets, plastic bodies. Maximum operating temperature 70 °C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2312386
Expiry date:
31/12/2028
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Deva on body.
Installation Requirements:
R001 R040
Model:
HANS14 1 function handshower
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2304371

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Incorporates quarter turn ceramic disc headworks with single lever operating members. Spout outlets incorporate plastic flow straighteners except MCA108 & SWO2108 witch are open. All products are supplied with metal back nuts. Maximum working pressure 5.0 bar, Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2304371
Expiry date:
30/04/2028
Size:
¾” BSP (M)
Marking:
Deva & DTC53 on tap body.
Installation Requirements:
R001 R006 R010
Model:
SAVV2108 MCA108 SWO2108
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240202081

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and manually operated diverter to shower outlet. The spout outlets are open out or incorporate a plastic flow straightener. Incorporates a non-rising spindle headwork with cross-top type operating members. Products are supplied with metal back nuts, hoses and shower handsets. Maximum working pressure 6.0 Bar Maximum operating temperature 60.0°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
240202081
Expiry date:
28/02/2029
Size:
¾” BSP (M)
Marking:
DTC 59 on body
Installation Requirements:
R001 R006 R020
Model:
VER106 TU106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240202082

Range of single hole, single outlet (swivel) combination tap assemblies incorporating ¼ turn ceramic disc headworks and single lever type or dome operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240202082
Expiry date:
28/02/2029
Size:
M10x1 (F).
Marking:
DTC 59 on body.
Installation Requirements:
R001 R006 R010
Model:
VR104, ALT104 & VL104
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240404031

Two hole, single outlet, fixed, deck mounted thermostatic bath mixer incorporating a quarter turn ceramic disc headwork controlling the flow and the temperature controlled via a thermostatic cartridge incorporating a manual override button with lever type operating members. The spout outlet incorporates a plastic flow straightener. The inlets incorporate stainless steel strainers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
240404031
Expiry date:
30/04/2029
Size:
¾” BSP (M)
Marking:
Methven on front of body. DTC53 on rear of body.
Installation Requirements:
R001 R006 R010
Model:
AVTBF Avoca Thermostatic Bath Filler
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240404035

Range of brass elbows for combination tap assemblies with EPDM gaskets and pillars to suit bath mixers. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240404035
Expiry date:
30/04/2029
Size:
¾” BSP (M) ½” BSP (F)
Marking:
DTC 53 etched on body
Installation Requirements:
R001
Model:
RLE35 2.5" Pillars To Suit Bath Shower Mixer SPE19 Brass Elbow SPE19BK Brass Elbow – Matte Black SPE19BB Brass Elbow – Brushed Brass SPE19BN Brass Elbow – Brushed Nickel SPE19GM Brass Elbow – Gunmetal
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#240204044

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240204044
Expiry date:
28/02/2029
Size:
Stainless Steel braided, EPDM lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA or Methven (AVBCP only) on operating member, DTC 53 on rear of body
Installation Requirements:
R001 R006 R010
Model:
HUD313 Hudson Mini Basin Mixer KIEL313 KIEL Mini Basin Mixer CPR313 CAPRI Mini Basin Mixer POR120 PORTO Basin Mixer ZON113 Zonos Mono Basin Mixer AVBCP Avoca Cold Start Basin Mixer
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.