Methven UK Limited Approvals


#2006357

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006357
Expiry date:
30/06/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC25 (brand of Methven) on rear of body. Deva on front of body.
Installation Requirements:
R001 R006 R009 r010
Model:
MDL104
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006362

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes) incorporating a ¼ turn ceramic disc headwork supplied with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006362
Expiry date:
30/06/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections or 15mm copper tails.
Marking:
DEVA on operating member. DTC34 (Brand of Methven) on rear of body.
Installation Requirements:
R001 R006 r010
Model:
Vision model: VSN104 VSN104F 320891
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005318

Range of shower outlets with chromium plated metal or plastic bodies some models include a shower hose. Inlets incorporate a stainless steel strainer and flow restrictors. SJK23 incorporates a stainless-steel anti-tamper device at the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005318
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
See model
Marking:
Methven on operating member (models SJK23-LF & SJK23-LF HSE) Methven on operating member & Satin Jet on face cap (models KRLFHSCP, SJK23, SJK23B HSE & SJK23B) Satin Jet on face cap (models SJK002, SJK009, OSQ23OCP, SJK005-LF & SJK005) Methven on face plate (model KRLFWSCP) Methven on body (models KRLFHSBK, KRLFHSGM, KRLFHSBB & KRLFHSBN)
Installation Requirements:
R001 R040
Model:
SJK 002 - ½” BSP (M) SJK005 - ½” BSP (F) SJK005-LF - ½” BSP (F) SJK23 - ½” BSP (M) SJK23-LF - ½” BSP (M) SJK23LF HSE - ½” BSP (F) SJK23B - ½” BSP (M) SJK23B HSE - ½” BSP (F) SJK 009 - ½” BSP (F) OSQ230CP - ½” BSP (F) KRLFHSCP - ½” BSP (M) KRLFWSCP - ½” BSP (F) Models added December 2020: KRLFHSBK - ½” BSP (M) Matte black KRLFHSGM - ½” BSP (M) Gun metal KRLFHSBB - ½” BSP (M) Brushed brass KRLFHSBN - ½” BSP (M) Brushed nickel ECO01 -1/2" BSP (M) Added 07/06/2023
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005319

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork, and single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005319
Expiry date:
31/05/2025
Size:
Stainless steel braided, EPDM lined hose assembly with ½” captive nut (Models VSN113/EX, RUB113 & VSN113F) 15mm copper tails (Models ELAN313 & VSN113)
Marking:
Deva on operating member. DTC34 on body.
Installation Requirements:
R001 R006 R010
Model:
ELAN313 VSN113 VSN113/EX VSN113F RUB113
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006075

Single hole, single outlet combination tap assembly (chromium plated brass) incorporating a sequential headworks with single lever operating member to control both the flow and temperature. The outlet incorporates a plastic flow straightener. The product also incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2006075
Expiry date:
30/06/2025
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with a ½” BSP (F) captive nut end connection with a ½” BSP (M) to 15mm compression adaptor.
Marking:
DEVA ON OPERATING MEMBER DTC10 ON BODY
Installation Requirements:
R001 R006 R010
Model:
SOL003
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006323

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a click waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006323
Expiry date:
30/06/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC32A (brand of Methven) on body. DEVA on operating member.
Installation Requirements:
R001 R006 R010
Model:
ADORE113/EK
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007302

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic flow straighteners and the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar.
WRAS Approval Number:
2007302
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC32A (Brand of Methven) on rear of body. Deva on operating member.
Installation Requirements:
R001 R005
Model:
ADORE102 ADORE102/501 LACE102 EXG5061 EDR02/CP
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007314

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007314
Expiry date:
31/07/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 on rear of body. DEVA on front of the body.
Installation Requirements:
R001 R090
Model:
BDG104 – Bridgewater Flexi sink mixer.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007321

Two hole, single outlet (fixed) combination tap assembly with brass body (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and self canceling diverter to shower outlet. The spout outlets incorporate plastic flow straighteners. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2007321
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R005 R030
Model:
DAR106
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007336

Range of bath pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. The spout outlets incorporates a plastic flow straightener. The product is supplied with either metal or plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar.
WRAS Approval Number:
2007336
Expiry date:
31/07/2025
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Model:
DCM102 DCM102/501 DCM SPEC102 MILAN 102 MILAN SPEC102 KEE MILAN102 EBT13102 SOLE102 D50010020 TUD02 TUD02/501 EBT2002 EBT2002501 All models are supplied with plastic backnuts excluding models: DCM SPEC102, MILAN SPEC102, KEE MILAN102
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 27

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.