Xiamen Lota International Co Ltd Approvals


#1906333

Range of three hole, wall mounted, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall type. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1906333
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
Lota on spout
Installation Requirements:
R001 R040 R160
Model:
60201-5001
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#1909072

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator (except for model 62914-5001). The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
1909072
Expiry date:
30/09/2024
Size:
¾” BSP (M)
Marking:
LOTA on left inlet leg.
Installation Requirements:
R001 R006 R030
Model:
62902-5101 62905-5001 62908-5001 62908-5101 62908-536801 62914-5001
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2003043

Range of floor mounted single hole, single outlet (fixed) combination tap assemblies with various finishes. The models incorporate ceramic cartridge headworks, single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. Products are supplied with a shower hose and shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003043
Expiry date:
31/03/2025
Size:
Stainless steel PET braided EPDM lined hose assemblies with ¾” captive nuts.
Marking:
LOTA on rear of body
Installation Requirements:
R001 R030
Model:
62287-5701, 62287-586801, 62287-574408.
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2005018

Range of single hole, single outlet (fixed) combination tap with brass bodies (various finishes, see model). Incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005018
Expiry date:
31/05/2025
Size:
Stainless Steel braided, PEX lined flexible hose assembly with a ½” BSP captive nut end connection
Marking:
Lota on front base of spout
Installation Requirements:
R001 R006 R009 R010
Model:
63042-5101-Basin Mixer (Chrome) 63042-516801 (Matt Black) 63042-514408 (Brushed Brass)
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2001103

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) with ¼ turn ceramic disc headworks (62861-0101 model) or ceramic cartridge headworks (all other models) with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose of the 62861-0101 model incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001103
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on rear of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
62931-0001, 62932-0001, 62861-0101.
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2001104

Single hole, single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator and a push button spray. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection. The inlet hoses incorporate a combined rubber washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001104
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on rear of tap body.
Installation Requirements:
R001 R009 R090
Model:
62862-0301.
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2012069

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012069
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
LOTA on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
63198-0201 Kitchen Mixer Chrome 63198-0204 Kitchen Mixer Brushed Nickel 63198-026801 Kitchen Mixer Matt Black 63198-024408 Kitchen Mixer Brushed Brass
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2012064

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012064
Expiry date:
31/12/2025
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Lota on side of body.
Installation Requirements:
R001 R006 R009 R010 R090
Model:
63261-0001 Chrome 63261-0004 Brushed Nickel 63261-006801 Kitchen Mixer Matt Black 63261-004408 Brushed Brass 63268-0001 Chrome 63268-0004 Brushed Nickel 63268-016801 Matt Black 63268-004408 Brushed Brass
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2107028

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members and a locakble self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic aerator. The product is supplied with a shower hose and handset and metal backnuts Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
2107028
Expiry date:
31/07/2026
Size:
¾” BSP (M)
Marking:
Lota on rear of body.
Installation Requirements:
R001 R006 R020
Model:
63426-5301 (Chrome plated), 63426-556801 (Matt black), 63426-544408 (Brushed brass).
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval


#2110049

Shower handset with a plastic body (various finishes - see model). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2110049
Expiry date:
31/10/2026
Note:
Open outlet use only
Size:
½” BSP (M).
Marking:
Lota on body.
Installation Requirements:
R001 R040
Model:
53081-2X Where X denotes finish and can be replaced by the following: 01= Chrome, 08 = Stainless steel, 04 = Brushed nickel, 0402 = Brushed nickel PVD, 0408 = Brushed Stainless steel 4403 = Brushed brass(light) 4408 = Brushed brass, 5804 = Heirloom silver, 6801 = Matt black,
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.