Range of thermostatic bar shower mixers, incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type of operating member. The temperature is controlled independently via a thermostatic mixing cartridge incorporating a manual override button. Inlets incorporate single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower hose, handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250203004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” x ½” off set unions

Marking:

‘Center’ logo (brand of Wolseley) on Body

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

D01196

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of thermostatic bar shower mixers, (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with a dome type operating member. Temperature is controlled independently via a thermostatic mixing cartridge with a dome type operating member that incorporates a manual override button. The Inlets incorporate stainless steel strainer washers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250203005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression

Marking:

‘Nabis’ logo (brand of Wolseley) on Body

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

D01197

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating non rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2105921

Size:

½” BSP (M)

Marking:

Swan Logo (Brand of Wolseley) on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/05/2026

Model:

C58113

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309382

Size:

See model.

Marking:

CB,W and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

635690 EF 8mm Coupler 635691 EF 10mm Coupler 635692 EF 15mm Coupler 635693 EF 22mm Coupler 635694 EF 28mm Coupler 635695 EF 35mm Coupler 635696 EF 42mm Coupler 635697 EF 54mm Coupler 635698 EF 15mm Slip Coupler 635699 EF 22mm Slip Coupler 636061 EF 35mm Slip Coupler 636062 EF 42mm Slip Coupler 636063 EF 54mm Slip Coupler 635700 EF 8mm End Cap 635701 EF 10mm End Cap 635702 EF 15mm End Cap 635703 EF 22mm End Cap 635704 EF 28mm End Cap 635705 EF 35mm End Cap 635706 EF 42mm End Cap 635707 EF 54mm End Cap 635708 EF 15mm x 10mm Reducer Coupler 635709 EF 22mm x 15mm Reducer Coupler 635710 EF 10mm x 8mm Fitting Reducer 635711 EF 15mm x 8mm Fitting Reducer 635712 EF 15mm x 10mm Fitting Reducer 635713 EF 22mm x 15mm Fitting Reducer 635714 EF 28mm x 15mm Fitting Reducer 635715 EF 28mm x 22mm Fitting Reducer 635716 EF 35mm x 15mm Fitting Reducer 635717 EF 35mm x 22mm Fitting Reducer 635718 EF 35mm x 28mm Fitting Reducer 635719 EF 42mm x 15mm Fitting Reducer 635720 EF 42mm x 22mm Fitting Reducer 635721 EF 42mm x 28mm Fitting Reducer 635722 EF 42mm x 35mm Fitting Reducer 635723 EF 54mm x 15mm Fitting Reducer 635724 EF 54mm x 22mm Fitting Reducer 635725 EF 54mm x 28mm Fitting Reducer 635726 EF 54mm x 35mm Fitting Reducer 635727 EF 54mm x 42mm Fitting Reducer 635728 EF 15mm x 1/2" Adaptor Coupler (Metric/Imperial) 635729 EF 22mm x 3/4" Adaptor Coupler (Metric/Imperial) 635730 EF 28mm x 1" Adaptor Coupler (Metric/Imperial) 635731 EF 8mm x 90 Degree Elbow 635732 EF 10mm x 90 Degree Elbow 635733 EF 15mm x 90 Degree Elbow 635734 EF 22mm x 90 Degree Elbow 635735 EF 28mm x 90 Degree Elbow 635736 EF 35mm x 90 Degree Elbow 635737 EF 42mm x 90 Degree Elbow 635738 EF 54mm x 90 Degree Elbow 635739 EF 15mm x 45 Degree Elbow 635740 EF 22mm x 45 Degree Elbow 635741 EF 28mm x 45 Degree Elbow 635742 EF 35mm x 45 Degree Elbow 635743 EF 42mm x 45 Degree Elbow 635744 EF 54mm x 45 Degree Elbow 635745 EF 15mm x 90 Degree Street Elbow 635746 EF 22mm x 90 Degree Street Elbow 635747 EF 28mm x 90 Degree Street Elbow 635748 EF 35mm x 90 Degree Street Elbow 635749 EF 42mm x 90 Degree Street Elbow 635750 EF 54mm x 90 Degree Street Elbow 635751 EF 15mm x 45 Degree Street Elbow 635752 EF 22mm x 45 Degree Street Elbow 635753 EF 28mm x 45 Degree Street Elbow 635754 EF 35mm x 45 Degree Street Elbow 635755 EF 42mm x 45 Degree Street Elbow 635756 EF 54mm x 45 Degree Street Elbow 635757 EF 15mm x 1/2" Wallplate Elbow Brass 635758 EF 10mm Equal Tee 635759 EF 15mm Equal Tee 635760 EF 22mm Equal Tee 635761 EF 28mm Equal Tee 635762 EF 35mm Equal Tee 635763 EF 42mm Equal Tee 635764 EF 54mm Equal Tee 635765 EF 22mm x 22mm x 15mm Reducer Tee 635766 EF 28mm x 28mm x 15mm Reducer Tee 635767 EF 28mm x 28mm x 22mm Reducer Tee 635768 EF 35mm x 35mm x 15mm Reducer Tee 635769 EF 35mm x 35mm x 22mm Reducer Tee 635770 EF 35mm x 35mm x 28mm Reducer Tee 635771 EF 42mm x 42mm x 15mm Reducer Tee 635772 EF 42mm x 42mm x 22mm Reducer Tee 635773 EF 42mm x 42mm x 28mm Reducer Tee 635774 EF 42mm x 42mm x 35mm Reducer Tee 635775 EF 54mm x 54mm x 15mm Reducer Tee 635776 EF 54mm x 54mm x 22mm Reducer Tee 635777 EF 54mm x 54mm x 28mm Reducer Tee 635778 EF 54mm x 54mm x 35mm Reducer Tee 635779 EF 54mm x 54mm x 42mm Reducer Tee 635780 EF 22mm x 15mm x 22mm Reducer Tee 635781 EF 28mm x 15mm x 28mm Reducer Tee 635782 EF 28mm x 22mm x 28mm Reducer Tee 635783 EF 22mm x 15mm x 15mm Reducer Tee 635784 EF 28mm x 22mm x 22mm Reducer Tee 635785 EF 15mm x 15mm x 22mm Reducer Tee 635786 EF 15mm Full Crossover 635787 EF 22mm Full Crossover 635788 EF 15mm Part Crossover 635789 EF 22mm Part Crossover 635790 EF 15mm x 1/2" Female Adaptor Brass 635791 EF 22mm x 3/4" Female Adaptor Brass 635792 EF 15mm x 15mm x 1/2" Reducer Tee Brass 635793 EF 22mm x 22mm x 1/2" Reducer Tee Brass 635794 EF 15mm x 1/2" Male Adaptor Brass 635795 EF 22mm x 3/4" Male Adaptor Brass 635796 EF 28mm x 1" Male Adaptor Brass 635797 EF 35mm x 1.1/4" Male Adaptor Brass 635798 EF 42mm x 1.1/2" Male Adaptor Brass 635799 EF 54mm x 2" Male Adaptor Brass 635800 EF 15mm x 1/2" Straight Tap Connector 635801 EF 15mm x 3/4" Straight Tap Connector 635802 EF 22mm x 3/4" Straight Tap Connector 635803 EF 15mm x 1/2" Bent Tap Connector 635804 EF 22mm x 1" Straight Union Adaptor 635805 EF 22mm x 1" Bent Union Adaptor

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of in-line spherical ball valves with brushed chrome brass bodies and PTFE seats. Incorporating lever or T-type operating members. Maximum working pressure: 15mm - 28mm 30 Bar, 35mm - 25 Bar Maximum operating temperature; 99°c

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250302048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression – 35mm Compression

Marking:

JET on operating member Size and PN on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

K6558 from 15mm to 35mm * JET BBV24 LEVER OP CXC BALL VALVE A numerical digit is added to the end of the model to indicate size; 3 = 15mm. 4 = 22mm. 5 = 28mm. 6 = 35mm. 7 = 42mm. 8 = 54mm K6554 from 15mm to 28mm * JET BBV25NP T HANDLE CXC BALL VALVE A numerical digit is added to the end of the model to indicate size; 3 = 15mm. 4 = 22mm. 5 = 28mm 32788 from 15mm to 28mm * CENTER WRAS LVR BRASS BALL VALVE A numerical digit is added to the end of the model to indicate size; 3 = 15mm. 4 = 22mm. 5 = 28mm K6563 from 15mm to 35mm * JET BBV24R RED LEVER XCXBALL VALVE A numerical digit is added to the end of the model to indicate size; 1 = 15mm. 2 = 22mm. 3 = 28mm. 4 = 35mm. 5 = 42mm. 6 = 54mm.

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of crimp fit spherical valves incorporating brushed chrome plated DZR brass bodies and ball, and PTFE seats. The products are supplied with lever operating members. For use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 Bar Maximum operating temperature 99.0°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250302049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm, 22mm, 28mm, 35mm, 42mm & 54mm Crimp Fitting (M Profile)

Marking:

MB Logo, Size, DN, PN and CR on valve body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

K11358 K11359 K11360 K11361 K11362 K11363

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies), incorporating non-rising spindle headworks with dome type operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250403013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) & ¾” BSP (M)

Marking:

C02049 & C02050 - ‘Saracen’ logo (brand of Wolseley) on operating member. C58100 & C58101 - ‘Swan’ logo (brand of Wolseley) on operating member.

Installation Requirements:

R001 R005

Expiry date:

30/04/2030

Model:

C58100 & C02049 ½ C MT C58101 & C02050 ¾ C MT

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company