Range of wall mounted three-hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks, (various operating members). The spout outlet incorporates a single check valve cartridge however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection and a plastic aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2311032

Expiry date:

30/11/2028

Note:

The wall mounted installation kit is not supplied as part of this approval.

Size:

¾” BSP F

Marking:

Samuel heath on spout backplate or SHS on underside of operating member.

Installation Requirements:

R001 R010 R040

Model:

V7K17S-1YY-XX V7K17S-2YY-XX V7K17S-3YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of wall mounted concealed two and three hole thermostatic shower valves with brass bodies. Incorporating two-way diverter valves. Model (V132-IS-XX) also incorporates a quarter turn ceramic disc headwork. Temperature is controlled independently via a thermostatic cartridge. The products incorporate single check valve cartridges, (however, the complete products have not been fully tested to demonstrate it provides backflow protection). Maximum operating pressure 10.0 bar.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2311049

Expiry date:

30/11/2028

Size:

¾” BSP (F).

Marking:

Samuel Heath on valve nut.

Installation Requirements:

R001 R010 R040

Model:

V111-IS-XX V132-IS-XX Where the product code suffix ‘XX’ denotes the product is unfinished.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Wall mounted spout outlet, (brass body - various finishes) incorporating a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2311052

Expiry date:

30/11/2028

Size:

½” BSP (F)

Marking:

SHS on underside of spout

Installation Requirements:

R001 R040

Model:

V646-XX V646-XX Wall mounted spout Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener or aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2311053

Expiry date:

30/11/2028

Size:

¾” BSP (F)

Marking:

SHS on underside of operating member or spout.

Installation Requirements:

R001 R010 R040

Model:

V6K17YY-XX V6K47YY-XX Style Moderne V6K17YY-XX, V6K47YY-XX Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, CCR = Clear Glass Levers. Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, CTB = City Bronze.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Model V7K33YY-XX incorporates an additional outlet for a side spray connection. Maximum working pressure 3.0 Bar Maximum operating temperature 70.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311077

Expiry date:

30/11/2028

Note:

V7K33YY-XX is not supplied with a hose or a hand spray outlet.

Size:

Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

Samuel Heath on body

Installation Requirements:

R001 R009 R090

Model:

V7K32YY-XX V7K33YY-XX Models: Landmark V7K32YY-XX, V7K33YY-XX Controllers V759-LF-XX, V759-LK-XX, V759-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of deck mounted flow control valves (brass bodies - various finishes) incorporating a quarter turn ceramic disc headwork with either a single lever (V7K42-L models) or cross top (V7K42-X models) operating member. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

2402702

Expiry date:

28/02/2029

Size:

¾” BSP M

Marking:

SHS on underside of operating member.

Installation Requirements:

R001

Model:

V7K42-LF-XX V7K42-XF-XX V7K42-LK-XX V7K42-XK-XX V7K42-LW-XX V7K42-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Factor:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2402703

Expiry date:

28/02/2029

Size:

¾” BSP (M)

Marking:

Samuel Heath on base of spout

Installation Requirements:

R001 R006 R010

Model:

V7K44-1YY-XX V7K44-2YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Lathe Lever, LW = Lathe Wheel. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Factor:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Range of bidet handsets (brass bodies, various finishes) with self-closing trigger mechanisms. Inlets incorporate flow limiters and stainless-steel filters in the head of the handsets. Inlet hoses are not supplied with products. Maximum working pressure: 5 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2312061

Expiry date:

31/12/2028

Size:

½” BSP (M).

Marking:

SHS on body.

Installation Requirements:

R001 R070 R415

Model:

V766F-SPRHO-XX, V766K-SPRHO-XX. Where XX denotes the surface finish, and it will always be either 2 or 3 digits which can be any combination of numbers and/or letters, as examples: CP = Chrome, URM = Urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Bidet handset (brass body, various finishes) with self-closing trigger mechanism and shower hose assembly. Inlets incorporate flow limiters and stainless-steel filters in the head of the handsets. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2312062

Expiry date:

31/12/2028

Size:

½” BSP (M)

Marking:

SHS on handset .SHS, WRAS & Year of Manufacture (YYYY) on conical nut

Installation Requirements:

R001 R070 R415

Model:

T2066W-SPR-XX. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Floor mounted, spout outlet, (brass body- various finishes) incorporating a plastic flow straightener. Maximum working pressure 65.0 Bar

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

240102035

Expiry date:

31/01/2029

Note:

Open outlet use only

Size:

1/2" BSP (F) inlets on installation kit

Marking:

Samuel Heath logo, flow rate and ASME A112.18.1/CSA standard on faceplate. Samuel Heath logo on body of rough kit.

Installation Requirements:

R001 R010 R040

Model:

V141-SP-XX For_me Freestanding Bath Spout V141-IS-XX For_me Installation Kit V141-SP-XX:- Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered. V141-IS-XX:- Where the product code suffix ‘xx’ denotes the product is unfinished.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with and a dome type operating member. The spout outlets incorporate plastic aerators. Model V208 is supplied with a lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240102036

Expiry date:

31/01/2029

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided, PE-X lined flexible hose assemblies with 1/2" BSP (F) captive nut end connectors.

Marking:

Samuel Heath on body.

Installation Requirements:

R010 R006 R009 R010

Model:

V208-XX (with Pop Up Waste) V210-XX (without Pop Up Waste) Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and /or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of floor mounted (fixed) combination tap assemblies, (brass bodies – various finishes) incorporating ceramic cartridge headworks (various operating members – see models) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure; 5 Bar Maximum operating temperature 85°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240602002

Expiry date:

28/02/2029

Note:

Product to be used with V736-IS-XX installation kit, however, it is not approved in its own right. The products are not supplied with a shower hose or handset.

Size:

½” BSP (F)

Marking:

Samuel Heath on front of body

Installation Requirements:

R001 R030

Model:

V7K36-YY-XX Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Ceramic Levers, or LK = Industrial Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a ‘lever type’ pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240402047

Expiry date:

30/04/2029

Size:

Stainless steel PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

SHS on underside of operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

V6K09YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Single hole, single outlet (fixed) over the rim swivel nozzle bidet combination tap assembly (brass body - various finishes) with a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole, metal.

WRAS Approval Number:

240402052

Expiry date:

30/04/2029

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP Captive nut end connections.

Marking:

SHS logo on underside of operating member

Installation Requirements:

R001 R006 R009 R010

Model:

V6K19-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, CTB = City Bronze.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Model (V108-XX) is supplied with a lever operated pop-up waste. Maximum working pressure: 5.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240502024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/05/2029

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies, with ½” captive nut end connections.

Marking:

Samuel Heath on body.

Installation Requirements:

R001 R006 R009 R010

Model:

V108-XX V128-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

View All Listings by this Company