Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and pull out spray. The spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2105004

Expiry date:

31/05/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

PPI on rear of body.

Installation Requirements:

R001 R090

Model:

907023

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

2104024

Expiry date:

30/04/2026

Size:

¾” BSP (M)

Marking:

PPI on rear of body

Installation Requirements:

R001 R006 R010

Model:

204606

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating member and a manual diverter to the shower outlet. The products are supplied with a shower hose and handset. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.

WRAS Approval Number:

2104033

Expiry date:

30/04/2026

Size:

¾” BSP (M)

Marking:

PPI on rear of body. PPI on shower handset.

Installation Requirements:

R001 R006 R020

Model:

204605. 204705.

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disk headworks with cross top operating members. The spout outlet incorporates either a plastic aerator or a flow straighter. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2104054

Expiry date:

30/04/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

PPI on rear of body.

Installation Requirements:

R001 R006 R010

Model:

207130

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company