PPI Xiamen Industry Co Ltd Approvals


WRAS Approval Number: 2001032

Pillar taps (chromium plated brass) with a non-rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2001032
  • Expiry date: 31/01/2025
  • Size: ½” BSP (M)
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R005
  • Model
    M0601, M0601A.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001064

Range of deck mounted, single hole, single outlet (fixed) pillar taps, incorporating a non-rising spindle headwork with either cross top (Models M1103 & M5403) or dome type (Models M5203 & M0103) operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2001064
  • Expiry date: 31/01/2025
  • Size: ½” BSP male
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M1103 M0103 M5403 M5203
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2001102

Wall mounted, single hole, single outlet (fixed) bib tap (chromium plated brass), incorporating a non-rising spindle with a cross top operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

  • Section: 1750 Taps
  • Section Subtitle: Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
  • WRAS Approval Number: 2001102
  • Expiry date: 31/01/2025
  • Size: ½” BSP (M)
  • Marking: PPI on bottom of tap body.
  • Installation Requirements R001 R040
  • Model
    M1140
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005800

Range of single hole double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks and single lever operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2005800
  • Expiry date: 28/02/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI Logo on rear of body
  • Installation Requirements R001 R006
  • Model
    907011
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003308

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) having a non-rising spindle headwork and cross top operating members. Product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 2003308
  • Expiry date: 31/03/2025
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M0606
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010801

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010801
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections with EPDM washers.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    143138
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2010802

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating non-rising spindle headworks with cross top operating members. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2010802
  • Expiry date: 31/10/2025
  • Size: Stainless steel braided EPDM lined hoses assemblies incorporating ½” captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    143708
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003339

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headwork and single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 2003339
  • Expiry date: 31/03/2025
  • Size: See model
  • Marking: PPI on body
  • Installation Requirements R001 R005
  • Model
    M3401A: ½” BSP (M). M3402A: ¾” BSP (M).
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003346

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Maximum operating temperature 60°C.

  • Section: 1863 Tubes
  • Section Subtitle: Elastomeric.
  • WRAS Approval Number: 2003346
  • Expiry date: 31/03/2025
  • Note: Open outlet use only.
  • Size: ½” BSP Captive nut.
  • Marking: PPI on ferrule.
  • Installation Requirements R001
  • Model
    SH1-2-1500-B-PVC-MBK1 (DN10), SH1-2-1500-PVC-MBK1 (DN8).
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003361

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with cross top operating members and a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 2003361
  • Expiry date: 31/03/2025
  • Size: Supplied with stainless steel EPDM lined braided hoses with ½” captive nut.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907004
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 11 of 16