Paini S.p.A. Rubinetterie Approvals


#2003367

Range of pillar taps with brass bodies (chromium plated) incorporating either a quarter turn ceramic disc or non-rising spindle headwork with lever or dome type operating members. The spout outlets incorporate a plastic aerator and the products are supplied with brass backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2003367
Expiry date:
31/03/2025
Marking:
Paini on body.
Installation Requirements:
R001 R006
Model:
200 & 203 ½” BSP (M). 202: ¾” BSP (M).
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval


#2009307

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headworks, and single lever operating members. The inlets incorporate flow strainer and the spout outlet incorporates a plastic flow straightener. Can be supplied with our without a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009307
Expiry date:
30/09/2025
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Paini and Paini logo (an apple) on body and operating member.
Installation Requirements:
R001 R010 R006
Model:
53**2050H59, Unika lever , without waste 53**2050H670, Clinica lever , without waste 53**2050H68, Tex lever , without waste 53**2110H59, Unika lever , with waste 53**2110H670, Clinica lever , with waste 53**2110H68, Tex lever , with waste Where ** denotes finishes and can be replaced by: CR = chrome plated, PW = stainless steel brushed PVD, PY = black PVD
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval


#2011356

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass). All models can be specified with either a non rising spindle headwork or a quarter turn ceramic disc headwork with dome (Tevere), cross top (Monaco) or single lever (Miura) operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2011356
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Paini on rear of body.
Installation Requirements:
R001 R006
Model:
578 Range: Miura lever: MRCR578E9Q. MRCR578E28AP. Monaco cross top: 08CR578E9Q. 08CR578E28AP. Tevere dome: TPCR578E9Q. TPCR578E28AP.
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval


#2011355

Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass). All models can be specified with either a non rising spindle headwork or a quarter turn ceramic disc headwork with dome (Tevere), cross top (Monaco) or single lever (Miura) operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0570 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, double outlet, swivel.
WRAS Approval Number:
2011355
Expiry date:
30/11/2025
Size:
½” BSP (M)
Marking:
Paini on rear of body.
Installation Requirements:
R001 R006
Model:
569 Range: Miura lever: MRCR569E9Q. MRCR569E28AP. Monaco cross top: 08CR569E9Q. 08CR569E28AP. Tevere dome: TPCR569E9Q. TPCR569E28AP.
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval


#2201318

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. The spout outlet incorporates a plastic aerator. The 80CR256TH model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201318
Expiry date:
31/01/2027
Note:
No testing performed on pop-up waste.
Size:
Stainless-steel braided thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Paini on front of body. Date of manufacture (WW/YY) on rear of body.
Installation Requirements:
R001 R006 R009 R010
Model:
80CR256TH, 80CR260TH.
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.