Officine Rigamonti Spa Approvals


#1905390

Filling link assembly incorporating a pressure reducing valve (maximum outlet pressure between 1.0 & 5.0 bar) and a double check valve assembly which incorporates check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3) housed within a DZR brass body. The product incorporates a push type valve which allows water to flow when operated until the required pressure is achieved. Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 80°C.

Section:
1015 Filling Loop
WRAS Approval Number:
1905390
Expiry date:
31/05/2024
Size:
15mm compression inlet /outlet.
Marking:
Officine Rigamonti spa logo, (the letters ‘OR’ within an oval), size, DR, direction of flow and date of manufacture (MMYY) on body.
Installation Requirements:
R001
Model:
Art. 523.815 & Art 523.816 filling loop device
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2007375

Range of brass bodied automatic air venting valves incorporating a plasitc float. The 501.512 AAV and 501.515 AAV models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2007375
Expiry date:
31/07/2025
Size:
See model.
Marking:
Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
Installation Requirements:
R001 R200
Model:
502.012: ⅜” BSP (M). 502.015: ½” BSP (M). 502.020: ¾” BSP (M). 502.024: 1” BSP (M). 501.512 AAV: ⅜” BSP (M). 501.515 AAV: ½” BSP (M).
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2007383

Range of brass bodied automatic air venting valves incorporating a plasitc float. The D2004 models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2007383
Expiry date:
31/07/2025
Size:
See model.
Marking:
Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
Installation Requirements:
R001 R200
Model:
RANGE OF AUTOMATIC AIR VENTING VALVES: D2003: 3/8” BSP (M). D2003: ½” BSP (M). D2003: ¾” BSP (M). D2003: 1” BSP (M). D2004: ½” BSP (M).
Factor:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254
General Email
info@officinerigamonti.it

View All Listings by this Company

Print This Approval


#2007380

Range of brass bodied automatic air venting valves incorporating a plasitc float. The FIG 776 models are supplied with an isolation valve, comprising of a brass body with a plastic plunger, spring, NBR ‘O’-ring and PTFE seal. The plunger is pushed open when the air venting valve is attached and the spring closes it when the air venting valve is removed. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2007380
Expiry date:
31/07/2025
Size:
See model.
Marking:
Officine Rigamonti spa logo (‘OR’), PN, tempature, Valmat (tradename of Officine Rigamonti spa) and Made in Italy on body.
Installation Requirements:
R001 R200
Model:
RANGE OF AUTOMATIC AIR VENTING VALVES: FIG 775: 3/8” BSP (M). FIG 775: ½” BSP (M). FIG 775: ¾” BSP (M). FIG 775: 1” BSP (M). FIG 776: ½” BSP (M).
Factor:
Hattersley
Company Name
Hattersley
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ

View All Listings by this Company
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2105806

Range of adjustable, in-line pressure reducing valves with DZR brass bodies. Adjsutable between 1.0 bar and 5.5 bar outlet pressure. Compression models are for use with copper pipe to EN1057. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2105806
Expiry date:
31/05/2026
Size:
See model.
Marking:
OR (Trademark of Officine Rigamonti SpA), DN, flow arrow, pressure, DR, WRAS and forging/cast date (MMYY) on body.
Installation Requirements:
R001 R120
Model:
232.007: 15mm compression. 232.008: 22mm compression. 232.009: ½” BSP (F) internal or ¾” BSP (M) external thread on both inlets.
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2205802

Pressure relief valve pre-set at 6.0 bar, with a brass body and EPDM seat washer. Maximum operating temperature 115°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2205802
Expiry date:
31/05/2027
Note:
For closed circuit use only.
Size:
½” BSP (F) x ½” BSP (F)
Marking:
Officine Rigamonti logo (OR), size, PN10 and flow arrow on body. Made in Italy and 6.0 bar on cap
Installation Requirements:
R001 R200
Model:
Art.487
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2205803

Range of pressure reducing valves with DZR brass bodies, internal stainless steel filter, EPDM ‘O’-rings and diaphragm. Adjustable outlet pressures between 1.0 and 6.0 bar or 1.0 and 12.0 bar (see model). Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2205803
Expiry date:
31/05/2027
Size:
SEE MODEL
Marking:
Officine Rigamonti logo (‘OR’), size, DN, flow arrow, DR and date of manufacturer (MM.YY) on body.
Installation Requirements:
R001 R120
Model:
Adjustable between 1.0-6.0 bar: 216.015: ½” BSP (M) Union, 216.020: ¾” BSP (M) Union, 216.025: 1” BSP (M) Union, 216.033: 1 ¼” BSP (M) Union, 216.042: 1 ½” BSP (M) Union, 216.050: 2” BSP (M) Union. Adjustable between 1.0-12.0 bar: 216.016: ½” BSP (M) Union, 216.021: ¾” BSP (M) Union, 216.026: 1” BSP (M) Union, 216.034: 1 ¼” BSP (M) Union, 216.043: 1 ½” BSP (M) Union, 216.051: 2” BSP (M) Union.
Manufacturer:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company

Print This Approval


#2209313

Range of inline manually adjustable pressure reducing valves with DZR brass or bronze bodies (see model), EPDM diaphragm, seat washers and ‘O’-rings. Adjustable outlet pressures between 1.0 and 7.0 bar. Maximum inlet supply pressure Art.229.0XX: 40.0 bar, Art.229.1XX: 25.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2209313
Expiry date:
30/09/2027
Size:
Art.229.0XX: ½”-4” BSP (F). Art.229.1XX: ½”-2” BSP (F).
Marking:
Officine Rigamonti spa logo (’OR’ within an oval), PN, size, Flow arrow, CR and date of manufacture (MMYY) on body.
Installation Requirements:
R001 R120
Model:
Art 229.0XX models: DZR brass bodies: Art 229.015, 229.020, 229.025, 229.033, 229.042 and 229.050. Bronze bodies: Art 229.066, 229.080 and 229.100 Art 229.1XX models: DZR brass bodies: Art 229.115, 229.120, 229.125, 229.133, 229.142 and 229.150.
Factor:
Officine Rigamonti Spa
Company Name
Officine Rigamonti Spa
Address
Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)
Phone
+39 0163 48 165 Fax: +39 0163347254
General Email
info@officinerigamonti.it

View All Listings by this Company
Manufacturer:
Officine Rigamonti spa
Company Name
Officine Rigamonti spa
Address
Località Molino Rastelli, 20 13018 Valduggia (VC)
General Email

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.