Ningbo Hengsheng Pipe Fitting Co.,Ltd. Approvals

#251012016

Range of end feed copper fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
251012016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Hengsheng logo (HS) and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2030
Model:
5090 (90° Elbow Close Ruff CxC): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5092 (90° Street Elbow Close Ruff Ftg×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5090R (Reducing 90° Elbow C×C): 12mm×10mm, 12mm×8mm, 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 54mm×42mm, 54mm×35mm, 54mm×28mm. 5041 (45° Elbow C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5040 (45° Elbow FTG×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5002A (90° Elbow Long Turn C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5001A (90°Street Elbow Long Turn Ftg×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5130 (Equal Tee C×C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5130R (Reducing TEE C×C×C): 6mm×6mm×8mm, 8mm×8mm×10mm, 8mm×8mm×6mm, 10mm×10mm×15mm, 10mm×10mm×12mm, 10mm×10mm×8mm, 12mm×12mm×18mm, 12mm×12mm×16mm, 12mm×12mm×15mm, 12mm×12mm×14mm, 12mm×12mm×10mm, 12mm×12mm×8mm, 12mm×12mm×6mm, 14mm×14mm×16mm, 14mm×14mm×12mm, 14mm×14mm×10mm, 15mm×15mm×22mm, 15mm×15mm×12mm, 15mm×15mm×10mm, 15mm×15mm×8mm, 18mm×18mm×22mm, 18mm×18mm×16mm, 18mm×18mm×15mm, 18mm×18mm×14mm, 18mm×18mm×12mm, 18mm×18mm×10mm, 22mm×22mm×28mm, 22mm×22mm×16mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×22mm×10mm, 28mm×28mm×35mm, 28mm×28mm×22mm, 28mm×28mm×18mm, 28mm×28mm×16mm, 28mm×28mm×15mm, 28mm×28mm×14mm, 28mm×28mm×12mm, 28mm×28mm×10mm, 35mm×35mm×42mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm, 54mm×54mm×15mm, 8mm×6mm×6mm, 10mm×8mm×10mm, 12mm×10mm×10mm, 12mm×8mm×8mm, 14mm×12mm×12mm, 14mm×12mm×14mm, 15mm×12mm×15mm, 15mm×12mm×12mm, 15mm×12mm×10mm, 15mm×10mm×12mm, 15mm×12mm×8mm, 15mm×10mm×15mm, 15mm×10mm×10mm, 18mm×15mm×15mm, 18mm×15mm×18mm, 18mm×14mm×16mm, 18mm×12mm×18mm, 18mm×12mm×15mm, 18mm×12mm×12mm, 22mm×15mm×22mm, 22mm×15mm×15mm, 22mm×15mm×12mm, 28mm×22mm×28mm, 28mm×22mm×22mm, 28mm×22mm×18mm, 28mm×22mm×15mm, 28mm×18mm×28mm, 28mm×18mm×22mm, 28mm×15mm×28mm, 28mm×15mm×22mm, 28mm×15mm×15mm, 35mm×28mm×35mm, 35mm×28mm×28mm, 35mm×28mm×22mm, 35mm×22mm×35mm, 35mm×22mm×28mm, 35mm×22mm×22mm, 35mm×15mm×35mm, 42mm×35mm×35mm, 42mm×35mm×42mm, 42mm×28mm×42mm, 42mm×22mm×42mm, 54mm×42mm×42mm, 54mm×42mm×54mm, 54mm×35mm×54mm. 5270 (Equal Coupling C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 5240 (Reducing Coupling C×C): 8mm×6mm, 10mm×8mm, 10mm×6mm, 12mm×10mm, 12mm×8mm, 12mm×6mm, 14mm×12mm, 14mm×10mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 16mm×15mm, 16mm×14mm, 16mm×12mm, 16mm×10mm, 18mm×10mm, 22mm×18mm, 22mm×15mm, 22mm×14mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×18mm, 28mm×16mm, 28mm×15mm, 28mm×14mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×18mm, 42mm×16mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. 5243 (Fitting Reducer Ftg×C): 8mm×6mm, 10mm×8mm, 10mm×6mm, 12mm×10mm, 12mm×8mm, 12mm×6mm, 14mm×12mm, 14mm×10mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 16mm×15mm, 16mm×14mm, 16mm×12mm, 16mm×10mm, 18mm×16mm, 18mm×15mm, 18mm×14mm, 18mm×12mm, 18mm×10mm, 22mm×16mm, 22mm×15mm, 22mm×14mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×16mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×18mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×18mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. 5301 (Tube Cap): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm.   5060 (Return Bend C×C): 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5085 (Cross Over Coupling C×C): 15mm, 22mm. 5086 (Partial Cross Over Ftg×C): 15mm, 22mm. 5062 (Straight Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1". 5063 (Bent Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1".
Product Images
Approval Holder:
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

Print This Approval

#251012017

Range of copper capillary, lead free solder ring and threaded fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
251012017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Hengsheng logo (HS) and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2030
Model:
SR5090 (90° Elbow Close Ruff C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5092 (90° Street Elbow Close Ruff Ftg×C): 15mm, 22mm, 28mm. 54mm SR5090R (Reducing 90° Elbow C×C): 22mm×15mm, 28mm×22mm, 28mm×15mm. SR5041 (45° Elbow C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5040 (45° Elbow FTG×C): 15mm, 22mm, 28mm. SR5130 (Equal Tee C×C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5130R (Reducing TEE C×C×C): 15mm×15mm×22mm, 15mm×15mm×12mm, 15mm×15mm×10mm, 22mm×22mm×28mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm, 54mm×54mm×15mm, 22mm×15mm×22mm, 22mm×15mm×15mm, 28mm×22mm×28mm, 28mm×22mm×22mm, 28mm×22mm×15mm, 28mm×15mm×28mm, 28mm×15mm×22mm, 28mm×15mm×15mm, 35mm×28mm×28mm. SR5270 (Equal Coupling C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5240 (Reducing Coupling C×C): 10mm×8mm, 12mm×10mm, 12mm×8mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 22mm×15mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. SR5243 (Fitting Reducer Ftg×C): 10mm×8mm, 12mm×10mm, 12mm×8mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 22mm×15mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. SR5301 (Tube Cap): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5085 (Cross Over Coupling C×C): 15mm, 22mm. SR5086 (Partial Cross Over Ftg×C): 15mm, 22mm. SR5062 (Straight Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1". SR5063 (Bent Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1".
Product Images
Approval Holder:
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

Print This Approval

#251012009

Range of copper press fittings with EPDM seals for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
251012009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Hengsheng logo (HS) and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2030
Model:
6002 (Press 90° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6001 (Press 90° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6041 (Press 45° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6040 (Press 45° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130 (Press Tee C×C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130R (Press Reducing Tee C×C×C): 15mm×15mm×12mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×15mm×15mm, 22mm×15mm×22mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 28mm×15mm×22mm, 28mm×22mm×22mm, 28mm×15mm×28mm, 28mm×22mm×28mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm. 6301 (Press Cap): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6270 (Press Straight Coupling C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. J6270 (Press Slip Coupling C×C): 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6240 (Press Reducing Coupling C×C): 15mm×12mm, 22mm×15mm, 22mm×18mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm. 6243 (Press Fitting Reducer Ftg×C): 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm.
Product Images
Approval Holder:
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.