Range of shower handsets (plastic bodies – various finishes).
Non-metallic materials and components comply with BS6920 at 60°C
Range of two-hole, single outlet combination tap assemblies (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets and an overhead shower outlet with plastic bodies (chrome plated, chrome plated/white or chrome plated/black coloured finish - see model). The inlet of the 2.1981.018 model incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Non-metallic materials and components comply with BS6920 at 55°C
Range of high pressure and low pressure thermostatic mixing valves. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Low pressure models incorporate a pump. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves marked with ‘LP’ have a maximum working pressure of 1.0 bar.
Non-metallic materials and components comply with BS6920 at 45°C
Range of multifunctional hand shower outlets with plastic bodies. The inlet is fitted with a single check valve and flow regulator, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 65°C
Range of single function handsets plastic bodies - various finishes. The inlet incorporates a single check valve and flow regulator, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C. Open outlet use only.
Non-metallic materials and components comply with BS6920 at 65°C
Three hole single outlet combination tap assembly (chromium plated brass body) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates an aerator. This product is supplied with stainless steel braided PEX lined flexible hose assemblies which connect from the inlets to the spout. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Overhead shower outlets, (brass bodies - various finishes). The inlet is fitted with a flow regulator. Maximum operating temperature 42°C. Open outlet use only.
Pillar taps with chromium plated - brass bodies incorporating a quarter turn ceramic disc headwork, with single lever type operating members. The spout outlet incorporates a flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 45°C
Range of exposed and conceled thermostatic mixing valves with brass bodies (chrome plated or finished for concelled). Incorporating single check valves at the inlets, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of overhead shower outlets with brass bodies (various finishes, see model), with stainless steel strainers and EPDM O-rings at the inlets. Models 26295W-** & 26295W-G-** are also supplied with flow regulators. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves brass body with black finish. Flow is controlled and on twin outlet models, diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork with dome operating member. Temperature is controlled independently via a thermostatic cartridge with manual override button and dome type operating member. Both inlets incorporate stainless steel strainers. The inlets of models 1.1836.465 & 1.1878.467 incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 50°C.
Range of wall mounted, concealed, three hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn, ceramic disc headworks with cross top (14415W-3-CP) or single lever (14415W-4-CP) operating members. The spout outlet incorporates a plastic aerator. Maximum operating temperature 60°C. Maximum operating pressure 4.1 bar.
Range of deck mounted three hole single outlet (fixed) combination tap assemblies with brass bodies (chromium plated), incorporatinig ceramic disc headworks with cross top (14428W-3-CP) or single lever (14428W-4-CP) operating members. The product is supplied with stainless-steel braided EPDM lined flexible hose assemblies to connect the headworks to the spout outlet. Spouts incororate plastic flow straightners. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Range of single-hole, single outlet, fixed combination tap assemblies, (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with click type pop-up wastes Maximum working pressure 5 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower outlets and shower handsets with plastic bodies (various finishes) and multi-spray patterns depending on model. Maximum operating temperature 50°C.
Range of shower outlets with plastic bodies (chromium finish). Incorporates flow a regulator. Claims of flow rate made by the manufacture on flow rate are not part of this approval. Maximum operating temperature 85°C
Range of shower outlets having plastic bodies, various finishes Maximum operating temperature 55°C
Wall mounted bath shower mixer with brass body (various finishes). Ceramic disc headwork with dome operating members, manually operated diverter to shower outlets. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Spout outlet incorporates a plastic aerator. Products are supplied with shower headhead, shower handset and shower hose. Maximum operating pressure 10 Bar. Maximum operating temperature 85°C.
Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic aerators (except 2.1977.005 that has flow restrictor) and the products are supplied with plastic backnuts. Maximum operating pressure 5 bar. Maximum operating temperature 60°C
Non-metallic materials and components comply with BS6920 at 60°C
Page 5 of 7
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
