Kohler Mira Ltd. Approvals


#1907338

Range of UPVC shower hoses with silicone ‘O’-rings and washers available in lengths of 1250mm to 2000mm. Maximum operating temperature 60°C

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
1907338
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
Kohler on conical nut.
Installation Requirements:
R001
Model:
1391107 (1250mm length) 6.1736.510.4.0 (1500mm length) 1385060 (1750mm length) 1385061 (2000mm length)
Factor:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1907333

Overhead shower outlet having an 8” chrome plated plastic body. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1907333
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
M24 threaded inlet
Marking:
Mira on nut
Installation Requirements:
R001 R040
Model:
Mira 8” Deluge Head 4.1735.125
Factor:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1907366

Range of electric open outlet instantaneous showers, incorporating a solenoid valve to control the flow and a removable plastic strainer after the main inlet. Products are supplied with a shower hose and handset. Maximum supply pressure 1.0 bar. Maximum operating temperature 45°C.

Section:
1370 Heaters
Section Subtitle:
Electric instantaneous, shower hose. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
1907366
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
Mira Elite QT on front cover
Installation Requirements:
R001 R040
Model:
Mira Elite SE 9.8kW (1.1941.001) & 10.8kW (1.1941.002). Model added November 2019: Mira Elite SE 9.8kW 1.1941.003
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1907361

Range of exposed and concealed thermostatic blending valves (brass bodies) incorporating a single sequential headwork controlling both flow and temperature. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Model 1.0.409.48.1 is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907361
Expiry date:
31/07/2024
Size:
15mm compression
Marking:
Rada Thermoscopic Exact 3 on front cover
Installation Requirements:
R001 R010 R040
Model:
1.0.408.01.3 Rada Exact-3. 1.0.409.48.1 Rada Exact-3 EV 1.0.427.02.1 Rada Exact B (built in version)
Factor:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval


#1909329

Range of shower arms (brass bodies - various finishes) incorporating a diverter which diverts flow between an overhead shower outlet to shower hand set. The hand shower outlet incorporates a single check valve (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1909329
Expiry date:
30/09/2024
Note:
Overhead shower outlet, s hower hose and handset is not supplied as part of this approval. Open outlet use only.
Size:
½” BSP (M)
Marking:
Kohler on operating member
Installation Requirements:
R001 R040
Model:
45210-** Where ** denotes finish and can be replaced by: CP – Polished Chrome BN - Brushed Nickel SN - Polished Nickel BV - Brushed Bronze TT - Vibrant Titanium AF - French Gold 2BZ - Oil Rubbed Bronze
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 26

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.