Intatec Limited Approvals


#241002054

Range of lever operated spherical valves with brass bodies, incorporating a chrome plated brass ball. Model 7741345 incorporates a drain valve end connection. For use with copper pipe to EN1057. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
241002054
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Intatec logo, date of manufacture (WW/YY) and DN on body. Intatec logo on operating member.
Installation Requirements:
R001 R511
Expiry date:
31/10/2029
Model:
7740665 - 15mm compression x ½” BSP captive nut 7741345 - 22mm compression x ¾” BSP captive nut 7740663 - 22mm compression x ¾” BSP captive nut
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#250704701

Non-verifiable single check valve assembly with chrome plated DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
250704701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm x 15mm compression
Marking:
Intatec logo, flow arrow & CR body.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
SCV15 Single check valve

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#240602076

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models DT400MX15CP & DT400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602076
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
IMIX DELTA, CR and size on body. IMIX DELTA on label on cap.
Installation Requirements:
R001 R040 R120
Expiry date:
30/06/2029
Model:
DT40015CP, DT40022CP DT400MX15CP & DT400MX22CP

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#241002712

Inlet control group with a DZR brass body, consisting of a pressure reducing valve and pressure relief valve (6.0 Bar). The inlet incorporates a stainless-steel strainer, and the outlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C. Outlet pressure range of the pressure reducing valve is 1.0 to 4.0 bar.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
241002712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression
Marking:
Intatec logo, CR , PN & DN on body. Intatec logo, 6.0 bar & BSEN 14941 on cap.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
UVGS22BC MODELS ADDED JULY 2025 UVGS22BC45 UVGS22BC08
Product Images

Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180

View All Listings by this Company

Print This Approval


#241088701

Range of in-line manually adjustable pressure reducing valves with a DZR brass body (brushed chrome finish). Compression models are for use with coper pipe (manufactured to EN 1057). The MINIPRVG model is supplied with a gauge. Outlet pressure adjustable from 0.8 to 4.0 bar. Maximum inlet supply pressure 15.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
241088701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Size: MINIPRVG - 15mm compression inlet/outlet. PRV27190400 - ½” BSP (F) Inlet x ¾" BSP (M) outlet. PRV11391500.1 - 15mm compression inlet/outlet.
Marking:
RBM, DR and flow arrow on body.
Installation Requirements:
R001 R008 R120
Expiry date:
31/10/2029
Model:
MINIPRVG, PRV27190400, PRV11391500.1.
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 13 of 19

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.