Intatec Limited Approvals


#2107035

Wall mounted, bar type, thermostatic shower mixer (chromium plated brass), incorporating a ½ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The TR10032CP model is supplied with a riser rail, shower hose and handset. The TR10010CP is the valve only. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2107035
Size:
15mm compression
Marking:
INTA, TR10010CP and date of manufacture (MM/YY) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2026
Model:
TRADE-TEC RANGE: TR10032CP (VALVE AND SHOWER KIT), TR10010CP (VALVE ONLY). Model added July 2024 IX100010CP - ENZO SINGLE OUTLET THERMOSTATIC SHOWER WITH FLEXIBLE RISER KIT AND HEAD (ROUND)

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2107036

Range of wall mounted compact shower panels with push button timed flow control. The inlet incorporates a plastic flow regulator and a stainless-steel strainer. Maximum working pressure 4.0 Bar Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2107036
Size:
½” BSP (M)
Marking:
INTA on operating member
Installation Requirements:
R001 R040
Expiry date:
31/07/2026
Model:
SP9206CP & SP9207CP.

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2107038

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and flow straightener. The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107038
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.
Marking:
Intatec logo, model and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
LO980CP

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2107134

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and flow straightener The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107134
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.
Marking:
Intatec logo and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
DMIXER Model added June 2024 DMIXERLF

Approval Holder:
LECICO Plc.
Company Name
LECICO Plc.
Address
2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD
Postcode
MK410QB
General Email
jrichards@lecico.co.uk

View All Listings by this Company

Print This Approval


#2201050

Range of deck mounted self-closing pillar taps (chromium plated brass), incorporating a spring-loaded headwork with a dome type operating member. The spout outlet incorporates a plastic flow straightener. During January and February 2022, the products are supplied with metal back nuts. From March 2022, the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
2201050
Size:
½” BSP (M)
Marking:
NC163 CP model: inta on operating member. All other models: Intatec logo on rear of tap body.
Installation Requirements:
R001 R006
Expiry date:
31/01/2027
Model:
NC160 CP. NC162 CP. NC163 CP. NC167 CP. NC170 CP.

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Idral S.p.A.
Company Name
Idral S.p.A.
Address
Via Isei, 8/10 - I-28010 Gargallo (NO)
Phone
+39 0322 912017
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 17

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.