InSinkErator Approvals


#2004061

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter near boiling water unit (vented via the spout outlet) and in-line water filter. Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous filtered hot water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. Filtered cold water is controlled by a solenoid valve activated by an infrared sensor. The product is supplied with a loose ⅜” x 15mm reducer, as well as an inline pushfit body incorporating an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both are intended to be installed on the inlet to the water filter. The product is supplied with loose ½” BSP (M) x ⅜ BSP (F) adaptor for installation on the hot and cold inlets to the tap. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.6 bar. Maximum operating temperature 70°C, except near boiling water circuit (from the under counter unit onwards) 99°C and the cold filter circuit which is cold supply only to the filter.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004061
Expiry date:
30/04/2025
Note:
All white and natural LLDPE and transparent silicone tubing supplied with this product must be installed where light is excluded. R010 applies to the mains cold and hot water connections only. R120 applies to the water filter. R150 applies to the cold feed to the filter. R170 applies to the water passing through the filter and onto associated circuits. The NXTF-1 undercounter unit is only approved when installed with one of the tap models listed in the approval
Size:
Mains hot and cold water connections: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. Water filter circuit: 15mm pushfit (for use with copper pipe).
Marking:
Insinkerator logo on base of tap and under counter unit
Installation Requirements:
R001 R006 R009 R010 R120 R150 R170
Model:
L Spout: F-4N1L-C. F-4N1L-BR. F-4N1L-BV. F-4N1L-BG. F-4N1L-RG. J Spout: F-4N1J-C. F-4N1J-BR. F-4N1J-BV. F-4N1J-BG. F-4N1J-RG. U Spout: F-4N1U-C. F-4N1U-BR. F-4N1U-BV. F-4N1U-BG. F-4N1U-RG. Where suffix denotes finish: C: Chrome. BR: Brushed Steel. BV: Black Velvet. BG: Brushed Gold. RG: Rose Gold. Under counter unit: NXTF-1
Factor:
InSinkErator
Company Name
InSinkErator
Address
4700 21st Street, Racine, WI 53406-5093

View All Listings by this Company

Print This Approval


#2209051

In-line water filter system comprising of a head and replaceable carbon block cartridge (within a fixed housing) for use with John Guest LLDPE pipe. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2209051
Expiry date:
30/09/2027
Size:
3/8” pushfit
Marking:
Insinkerator, model, and product information on label on body
Installation Requirements:
R001 R120 R150 R170
Model:
F-701R
Factor:
InSinkErator
Company Name
InSinkErator
Address
4700 21st Street, Racine, WI 53406-5093

View All Listings by this Company
Manufacturer:
3M Wroclaw Sp. zoo
Company Name
3M Wroclaw Sp. zoo
Address
Ul. Kowalska 143 51-424 Wroclaw Poland

View All Listings by this Company

Print This Approval


#2304910

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter boiling water unit (vented via the spout outlet) and in-line water filter (on instantaneous hot water supply only). Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous hot water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. The product is supplied with loose 3/8” x 15mm reducers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.6 bar. Maximum operating temperature 98°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2304910
Expiry date:
30/04/2028
Note:
All white LLDPE and transparent silicone tubing supplied with this product must be installed where light is excluded.
Size:
Mains hot and cold water connections: Stainless steel braided silicone lined flexible hose assemblies with ½” captive nut end connections. Size added January 2019: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. Water filter inlet: 10mm LLDPE tubing
Marking:
Insinkerator logo on body
Installation Requirements:
R001 R006 R009 R010 R170
Proviso:
The single check valve supplied with this product must be installed to maintain the validity of the WRAS approval.
Model:
Insinkerator 3N1 Range: L-spout models: F-H3N1-C-1 (Chrome) - Product No. 44837, F-H3N1-W-1 (White) - Product No. 44837A, F-H3N1-BR-1 (brushed Nickel) - Product No. 44837B, F-H3N1-ORG-1 (Orange) - Product No. 44837AL, F-H3N1-NS-1 (Natural Stone) - Product No. 44837AM, F-H3N1-JB-1 (Jet black) - Product No. 44837AP, F-H3N1-G-1 (Gold) - Product No. 44837AS F-H3N1-AN-1 (Anthracite) - Product No. 44837AN. F-H3N1-BV-1 (Black velvet) - Product No. 44837AW. J-spout models: F-H3N1J-C-1 (Chrome) - Product No. 45097 F-H3N1J-BR-1 (Brushed Nickel) - Product No. 45097B. F-H3N1J-RG (Rose Gold) - Product No. 45097AT-ISE. F-H3N1J-BV-1 (Black Velvet) - Product No. 45097AW Tank and filter NXTF-1 - Product No. 44900 All taps to be installed with the tank and filter assembly
Factor:
InSinkErator
Company Name
InSinkErator
Address
4700 21st Street, Racine, WI 53406-5093

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.