Range of draining taps, straight or elbowed with brass bodies incorporating a rising spindle headwork. Maximum working pressure 10.0 Bar Maximum operating temperature 95.0°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

250702048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

IDC E logo and size on body. size and EN number on nut

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

BF8712 Elbow Drain off Mi x C Compression x Male 3/4”Mx 21mm BF8713 Elbow Drain off Mi x C Compression x Male 1”M x 27.4mm BF4712 Elbow Drain off compression 21mm x 21mm BF4713 Elbow Drain off compression 27.4mm x 27.4mm BF1711 Straight Drain off compression 14.7mm x 14.7mm BF1712 Straight Drain off compression 21mm x 21mm BF1713 Straight Drain off compression 27.4mm x 27.4mm

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

Zhejiang IDC Fluid Control Co Ltd

Company Name

Zhejiang IDC Fluid Control Co Ltd

Address

Machinery Industrial Park Zhugang Town Yuhuan County

General Email

View All Listings by this Company

Range of combined temperature and relief valves incorporating DZR brass bodies and PTFE washers. Valves incorporate a manually operated rotational easing gear and can be supplied pre-set at 6.0 bar, 7.0 bar, 8.0 bar or 10.0 bar. Compression outlet connections are for use with copper pipe (manufactured to EN1057, R250). Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

2030 Valves

Section Subtitle:

Combined thermal and pressure relief.

WRAS Approval Number:

250702720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

IDC logo: E mark (~E~ within a circle), flow arrow and CR on body. Maximum temperature, maximum relief pressure size and other technical information on cap.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

PTR01215: ½” BSP (M) inlet x 15mm compression outlet, PTR015: ½” BSP (M) inlet x 15mm compression outlet, PTR03422: ¾” BSP (M) inlet x 22mm compression outlet, PTR012: ½” BSP (M) inlet x ½” BSP (F) outlet, PTR034: ¾” BSP (M) inlet x ¾” BSP (F) outlet. Models added January 2026 PTR01215-WS ½” BSP (M) inlet x 15mm compression outlet short PTR01215-WL ½” BSP (M) inlet x 15mm compression outlet long PTR015-WS ½” BSP (M) inlet x 15mm compression outlet short PTR015-WL ½” BSP (M) inlet x 15mm compression outlet long PTR03422-WS ¾” BSP (M) inlet x 22mm compression outlet short PTR03422-WL ¾” BSP (M) inlet x 22mm compression outlet long PTR012-WS ½” BSP (M) inlet x ½” BSP (F) outlet short PTR012-WL ½” BSP (M) inlet x ½” BSP (F) outlet long PTR034-WS ¾” BSP (M) inlet x ¾” BSP (F) outlet short PTR034-WL ¾” BSP (M) inlet x ¾” BSP (F) outlet long

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co Ltd

Company Name

IDC Fluid Control Co Ltd

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Taizhou City, Zhejiang Province

General Email

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of flexible corrugated stainless-steel tubing with white plastic covering. Compression connections are for use with copper pipe (manufactured to EN 1057). Captive nut end connections incorporate an EPDM gasket. 2BACa0504 prefix models incorporate a servicing valve (chromium plated brass body with brass ball) on the compression end connection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1870 Tubes

Section Subtitle:

Flexible - Metal.

WRAS Approval Number:

250912031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

IDC, DN, PN, WRAS, year of manufacture (YYYY) on ferrule/end connection. Size on both captive and compression nut. Flow arrow on servicing valve body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

2BACa03042202: 15mm compression x ½” BSP (F), 2BACa03042302: 15mm compression x ¾” BSP (F), 2BACa03043202: 22mm compression x ½” BSP (F), 2BACa03043302: 22mm compression x ¾” BSP (F), 2BACa03032202: 15mm compression, 2BACa03033302: 22mm compression, 2BACa05042202: 15mm compression ISO x ½” BSP (F), 2BACa05042302: 15mm compression ISO x ¾” BSP (F), 2BACa05043202: 22mm compression ISO x ½” BSP (F), 2BACa05043302: 22mm compression ISO x ¾” BSP (F), 2BACa02012202: ½” BSP (F)x(F), 2BACa02013302: ¾” BSP (F)x(F).

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co Ltd

Company Name

IDC Fluid Control Co Ltd

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Taizhou City, Zhejiang Province

General Email

View All Listings by this Company

Range of DZR brass and nickel plated DZR brass pressure reducing valves with a pressure gauge connection. Compression connection to be used with copper pipe EN1057. Outlet pressures adjustable between 1.5 & 7.0 bar (pre-set at 3.0 bar). Maximum working pressure 16.0 bar. Maximum operating temperature of 85°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

251104702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

iDC, WRAS, size, PN, flow arrow & CR on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

1PRB312 - ½" BSP (F), 1PRB315 - ¾" BSP (F), 1PRB316 - 1" BSP (F), 1PRG311 - 14.7mm compression, 1PRG312 - 15mm compression, 1PRG313 - 21mm compression, 1PRG315 - 22mm compression.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company