Hansgrohe SE Approvals


WRAS Approval Number: 1810012

Range of concealed diverter valves with DZR brass bodies (various finishes), ceramic disc diverter and EPDM ‘O’-rings and seals. The product can supplied with a trim set and various operating members (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2050 Valves
  • Section Subtitle: Diverter.
  • WRAS Approval Number: 1810012
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on (concealed) brass body of basic sets (15 930 180 & 15 981 180). 15 932 xxx trim set: Hansgrohe on backplate. All other trim sets: Axor on backplate.
  • Installation Requirements R001
  • Model
    Basic sets - Both can be installed in conjunction with any of the trim sets: 15 930 180 Hansgrohe Basic set for Quattro four-way diverter valve for concealed installation 15 981 180 Hansgrohe Basic set for Trio diverter valve for concealed installation. Trim sets (dome type operating member unless stated): 10 930 xxx AXOR Starck Trio/Quattro diverter valve for concealed installation (cross top operating member), 10 932 xxx AXOR ShowerCollection Trio/Quattro diverter valve 120/120 Square for concealed Installation, 10 934 xxx AXOR Starck X Trio/Quattro diverter valve for concealed installation (cross top operating member), 11 925 xxx AXOR Urquiola Trio/Quattro diverter valve for concealed installation (cube type operating member), 12 731 xxx AXOR Starck Organic Trio/Quattro diverter valve for concealed installation 12 x 12, 15 932 xxx Hansgrohe Trio/Quattro S diverter valve for concealed Installation, 18 730 xxx AXOR Massaud Trio/Quattro diverter valve for concealed installation, 34 920 xxx AXOR Citterio M Trio/Quattro diverter valve for concealed installation, 38 933 xxx AXOR Uno Trio/Quattro diverter valve for concealed installation, 39 920 xxx AXOR Citterio Trio/Quattro diverter valve for concealed installation (single lever operating member), 39 925 xxx AXOR Citterio Trio/Quattro diverter valve for concealed installation (cross top operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811002

Wall mounted shower kit with brass body (various finishes), consisting of an overhead shower outlet, handset and hose. The product is supplied with a fixed riser assembly and incorporates a manual diverter valve alternating the flow between outlets using a push button mechanism. The shower handset connection incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset and overhead shower incorporates a stainless-steel strainer and a plastic flow regulator. Maximum working temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1811002
  • Expiry date: 30/11/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on shower handset and overhead shower
  • Installation Requirements R001 R040
  • Model
    27 270 xxx - Hansgrohe Crometta S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811003

‘Axor Uno’ range of three hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0660 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, swivel.
  • WRAS Approval Number: 1811003
  • Expiry date: 30/11/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: AXOR on front spout.
  • Installation Requirements R001 R006 R007 R009 R010
  • Model
    Axor Uno Range: 38 054 xxx & 45 133 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811004

‘Axor Citterio M’ range of wall mounted, three-hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models listed are spout and trim sets intended for use with rough-in set 10 303 180. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1811004
  • Expiry date: 30/11/2023
  • Note: The rough-in set 10 303 180 is not covered by the scope of this approval.
  • Size: Intended for use with specified rough-in sets.
  • Marking: Axor or Axor & Hansgrohe on base of spout
  • Installation Requirements R001 R010 R040
  • Model
    Axor Citterio M Range: 34 313 xxx, 34 314 xxx, 34 315 xxx & 34 316 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812025

‘Hansgrohe Logis’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70 °C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1812025
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe SE found on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Logis Range: 71 832 xxx, 71 839 xxx - Coolstart Eco & 71 833 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812026

Range of pillar taps with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a rubber aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1812026
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided, PEX lined hose assembly incorporating ⅜” Captive nut end connections
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R009
  • Model
    31 130 xxx Hansgrohe Focus Pillar tap Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812027

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a rubber aerator. Model 32 040 is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60 °C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1812027
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    Hansgrohe Talis range: 32 040 xxx 32 041 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812028

Range of ceramic cartridge headworks with plastic bodies & silicone rubber seals. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 1812028
  • Expiry date: 31/12/2023
  • Size: 35mm
  • Marking: Hansgrohe & M35 on shoulder. Date of manufacture (DD/MM/YY) on body.
  • Installation Requirements R001
  • Model
    30 129 900 - M35R, 30 129 902 - M35R, 30 129 910 - M35R EcoR & 30 129 920 - M35L. Model added May 21/05/2021 30 129 922
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812058

Deck mounted pillar tap with a brass body (various finishes), incorporating a half turn ceramic disc headwork with a dome type operating member. The spout outlet incorporates a plastic spray disc and a plastic flow regulator. This product is supplied with a stainless-steel strainer, intended for installation at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1812058
  • Expiry date: 31/12/2023
  • Size: Stainless steel braided PEX lined flexible inlet hose assembly incorporating ⅜” captive nut end connections.
  • Marking: Axor on body
  • Installation Requirements R001 R006 R009
  • Model
    12 110 xxx - Axor Starck Organic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812059

Range of wall mounted, concealed, brass bodied basic installation sets, intended for use in conjunction with specific trim and finish sets. Maximum working pressure 10.0 Bar. Maximum operating temperature 75°C.

Print This Approval



Back To Directory Sections

Page 10 of 32