Hansgrohe SE Approvals


#2201035

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with waste outlets (see models). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0450 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive end connections.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2027
Model:
14 042 xxx Hansgrohe Ecos Single lever basin mixer M CoolStart without waste set 31 539 xxx Hansgrohe Focus Single lever basin mixer 70 CoolStart with pop-up waste set 14 080 xxx Hansgrohe Ecos Single lever basin mixer M with pop-up waste set 31 910 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle and pop-up waste set 31 914 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle without waste set 31 604 xxx Hansgrohe Focus Single lever basin mixer 70 with push-open waste set 31 730 xxx Hansgrohe Focus Single lever basin mixer 70 with pop-up waste set 31 732 xxx Hansgrohe Focus Single lever basin mixer 70 with chain 31 733 xxx Hansgrohe Focus Single lever basin mixer 70 without waste set 31 951 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow with pop-up waste set 31 952 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow without waste set Model added August 2023: 31 559 xxx Waterforms Single lever basin mixer M CoolStart with push-open waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203010

Range of single hole, single outlet, fixed, electronically controlled tap assemblies with brass bodies (various finishes), incorporating an electronic cartridge controlling the flow which is activated via an infrared sensor (either battery or mains powered). Models 31 171 xxx & 31 173 xxx incorporates a manually operated temperature control. The inlet adapters incorporate stainless steel filters and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 ). The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Description:
Tap with a non-touch methods of flow control and a single inlet.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8” BSP captive nuts with a check valve adapter which has a 3/8” BSP (F) inlet.
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R006 R009 R010 R570
Expiry date:
31/03/2027
Model:
Hansgrohe Focus Electronic basin mixer with temperature control: 31 171 xxx - battery-operated 31 173 xxx - 230 V mains connection Hansgrohe Focus Electronic basin mixer with temperature pre-adjustment: 31 172 xxx - battery-operated 31 174 xxx - 230 V mains connection Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203012

A range of wall mounted thermostatic blending valves with brass bodies (various finishes). The temperature is controlled via a thermostatic cartridge and dome operating member and flow is controlled via a quarter turn ceramic headwork. Product can come with one, two or three push type cartridges that divert the flow to various outlets (see model) The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
2010 Shower Valves
Description:
Shower valve with thermostatic temperature control
45 710 180 – Basic set not approved in its own right.
Size:
1/2" BSP (F) inlet and outlet (45 710 180 Basic set)
Marking:
AXOR on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2027
Model:
AXOR One thermostatic module 45 711 xxx – 1 function 45 712 xxx – 2 functions 45 713 xxx – 3 functions 45 710 180 – Basic set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203015

Range of ceramic disc diverter cartridges with plastic bodies and silicon ‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Description:
Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
Size:
32mm OD
Marking:
Hansgrohe on on body
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
30 587 500 AUV32 Shut-off and diverter valve 30 727 600 AUV32-1 Shut-off and diverter valve 30 727 610 AUV32-1 Shut-off and diverter valve
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203017

Two-hole, single outlet swivel combination tap assembly in various finishes (see model) incorporating quarter turn ceramic disc headworks with a cross top operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Description:
Two hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
No testing performed on pop-up waste.
Size:
Stainless steel braided TPSIV lined flexible hose assembly incorporating 3/8" BSP captive nut end connection
Marking:
AXOR on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
16 510 xxx AXOR Montreux 2 Where XXX denotes the surface finish (which is a non-water part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203018

Range of single hole, single outlet (swivel) combination tap assemblies, brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Description:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Size:
Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
Marking:
Axor on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
16 502 xxx AXOR Montreux (2-handle basin mixer 210 with cross handles and pop-up waste set). 16 505 xxx AXOR Montreux (2-handle basin mixer 160 with cross handles for hand washbasins with pop-up waste set). 16 506 xxx AXOR Montreux (2-handle basin mixer 210 with cross handles and waste set). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203019

Manual diverter valve controlling the flow to a hand shower or overhead shower, housed within a brass body (various finishes). Incorporating a stainless-steel strainer and approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 70°C.

Section:
2050 Diverter Valves
Description:
Diverter cartridge with manual adjustment.
Open outlet use only.
Size:
½” BSP Conical nut on shower hose.
Marking:
Hansgrohe on handset, shower rose and holder.
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
26 793 XXX Hansgrohe Croma Select S 280 Shower pipe Reno
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203020

Shower head with a brass body (various finishes), incorporating EPDM O- rings and a stainless-steel strainer at the inlet. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Size:
½” BSP (F)
Marking:
Hansgrohe on side of shower head
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
26 734 xxx Hansgrohe Croma Overhead shower 220 1jet Low Pressure Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203046

Single hole, single outlet (fixed, with swivel nozzle) bidet combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Description:
Single hole bidet tap with a single outlet fixed spout with swivel nozzle.
No testing performed on pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hoses with 3/8" captive nut end connections.
Marking:
AXOR on body - 39 201 XXX Rhombic cut AXOR on operating member - AXOR Citterio 39 214 XXX
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
AXOR Citterio 39 214 XXX & 39 201 XXX Rhombic cut Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203359

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Description:
Single hole bidet tap with a single outlet fixed spout with swivel nozzle.
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Axor (brand name of Hansgrohe SE) on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
48 210 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.