Hansgrohe SE Approvals


WRAS Approval Number: 1801028

Range of concealed thermostatic blending valves with brass bodies (various finishes - see model) and either a single lever, cross top, dome or cube type operating member (depending on model). The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection . The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. Maximum Working Pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1801028
  • Expiry date: 31/01/2023
  • Note: The I-box 01800180 rough in set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe or Axor on face plate.
  • Installation Requirements R001 R040
  • Model
    15 741 xxx Hansgrohe ShowerSelect S Highflow thermostatic mixer for concealed installation, 15 715 xxx Hansgrohe Ecostat S Highflow thermostatic mixer for concealed installation, 31 571 xxx Hansgrohe Metris Highflow thermostatic mixer for concealed installation, 15 734 xxx Hansgrohe ShowerSelect Glass thermostatic mixer highflow for concealed installation, 15 734 xxx Hansgrohe ShowerSelect Glass thermostatic mixer highflow for concealed installation, 15 772 xxx Hansgrohe PuraVida Highflow thermostatic mixer for concealed installation, 15 760 xxx Hansgrohe ShowerSelect Thermostat highflow for concealed installation, 38 715 xxx Axor Uno Highflow thermostatic mixer for concealed installation, 36 711 xxx Axor ShowerSelect Soft thermostatic mixer highflow for concealed installation, 10 715 xxx Axor Starck Highflow thermostatic mixer for concealed installation, 10 717 xxx Axor Starck X Highflow thermostatic mixer for concealed installation, 12 711 xxx Axor Starck Organic Highflow thermostatic mixer for concealed installation, 11 731 xxx Axor Urquiola Highflow thermostatic mixer for concealed installation, 17 712 xxx Axor Carlton Highflow thermostatic mixer for concealed Installation with lever handle, 17 716 xxx Axor Carlton Highflow thermostatic mixer for concealed installation with cross handle, 36 718 xxx Axor ShowerSelect Square Highflow thermostatic mixer for concealed installation, 36 721 xxx Axor ShowerSelect Round thermostatic mixer highflow for concealed installation, 16 815 xxx Axor Montreux Highflow thermostatic mixer for concealed installation, 34 716 xxx Axor Citterio M Highflow thermostatic mixer for concealed installation, 39 711 xxx Axor Citterio Highflow thermostatic mixer for concealed installation with lever handle, 39 716 xxx Axor Citterio Highflow thermostatic mixer for concealed installation with cross handle, 18 741 xxx Axor Massaud Highflow thermostatic mixer for concealed installation, 19 702 xxx Axor Bouroullec Highflow thermostatic mixer for concealed installation, 15 706 xxx Hansgrohe Ecostat E Thermostatic mixer highflow for concealed installation, 15 756 xxx Hansgrohe Ecostat S Thermostatic mixer highflow for concealed Installation, 16 824 xxx Axor Montreux Thermostatic mixer highflow with lever handle for concealed installation. All of the above are to be installed in conjunction with the rough in set: 01800180. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801030

Concealed manual (shower) blending valve with a brass body and chrome plated trim set, incorporating a ceramic cartridge headwork with a single lever operating member. The concealed body (I-box) incorporates a ½” BSP (M) to ¾” BSP (F) adapter, which can be removed if required. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1801030
  • Expiry date: 31/01/2023
  • Note: This approval does not include a shower hose and handset. The I-box 01800180 rough in set is not approved in its own right.
  • Size: ¾” BSP (F)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R010 R040
  • Model
    31 365 xxx (Metropol Classic) which must be installed in conjunction with the I-box 01800180 rough in set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804004

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1804004
  • Expiry date: 30/04/2023
  • Size: Stainless steel braided PEX lined hoses incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe Logo on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    73 865 xxx M52 M521-H270 Single lever kitchen mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810705

Axor Starck shower shut-off valve basic set, incorporating non rising spindle headwork with DZR brass body and EPDM seals. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0440 Headworks
  • WRAS Approval Number: 1810705
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (F) inlets. ½” and ¾” BSP (F) outlets.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R040
  • Model
    10 971 180 Axor Shower Collection Basic set for shut-off valve 120/120 for concealed installation
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    1 Vor Heubach 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with a range of single lever operating members. The cold-water pathway incorporates a diverter valve, situated at the bottom of the tap body which diverts the flow to an optional outlet that is intended to supply appliances. The spout outlets incorporate a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1801014
  • Expiry date: 31/01/2023
  • Note: These products incorporate an additional cold-water outlet that is intended to supply appliances. Appropriate backflow prevention must be installed at the point of connection to any appliance installed.
  • Size: Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe logo on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 803 xxx - Hansgrohe Focus & 73 887 xxx - Hansgrohe M414-H160.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805324

Hansgrohe ‘Metropol’ range of wall mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The products incorporate a self-cancelling diverter to shower outlet and a plastic aerator in the spout outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1805324
  • Expiry date: 31/05/2023
  • Note: Not supplied with a shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R030
  • Model
    Hansgrohe Metropol 32 540 xxx & 74 540 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805022

Hansgrohe ‘Raindance’ & ‘Croma 280’ ranges of overhead shower outlets (brass bodies – in various finishes). The inlets incorporate a plastic flow regulator. Models 27 474 xxx & 27 477 xxx are also supplied with a shower arm. Model 26 221 xxx also incorporates a stainless-steel strainer. All other models incorporate a plastic strainer. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805022
  • Expiry date: 31/05/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M) (Raindance models) & ½” BSP (F) (Croma models).
  • Marking: ‘Hansgrohe’ on side of showerhead
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Raindance: 27 474 xxx & 27 477 xxx. Hansgrohe Croma: 26 220 xxx & 26 221 xxx (EcoSmart) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805023

‘Axor Starck’ range of hand showers with plastic bodies – in various finishes. The products incorporate a stainless-steel strainer and integral flow regulator. Models 28 532 xxx & 12 680 xxx have a multi-function spray pattern utilising a plastic aerator. Maximum operating temperature: 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805023
  • Expiry date: 31/05/2023
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe & Axor on handset
  • Installation Requirements R001 R040
  • Model
    Axor Starck Range: 10 531 xxx, 28 532 xxx & 12 680 xxx (Organic). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805027

Hansgrohe ‘Axor’ range of chromium plated brass shower outlets, shower arms and ceiling connectors. The inlet of the overhead shower outlet incorporates a stainless-steel strainer. Model 26 034 xxx is supplied with a shower arm, and model 26 035 xxx is supplied with a ceiling connector. Maximum operating temperature 70°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805027
  • Expiry date: 31/05/2023
  • Note: Open outlet use only. Compatible shower arms and ceiling connectors are intended for use with shower outlets specified in this approval and are not approved in their own right.
  • Size: Shower outlet - ½” BSP (F). Connectors and arms - ½” BSP (M).
  • Marking: AXOR on shower plate.
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Axor Range: 30 247 xxx, 26 034 xxx & 26 035 xxx. Compatible shower arm: 26 431 xxx Axor (390mm). Compatible ceiling connectors: 26 432 xxx (100mm) & 26 433 xxx (300mm). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805028

‘Axor Citterio E’ range of wall mounted, concealed thermostatic shower control valves (DZR brass bodies - trims in various finishes), incorporating a non-rising spindle headwork controlling flow using a cross top operating member, and a manual diverter valve directing the flow between multiple shower outlets using single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805028
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” BSP (F).
  • Marking: Basic sets: Hansgrohe and DR on body. Finish sets: Axor on dome type operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Basic Sets: 36 701 xxx - Axor Citterio E (2 outlets) & 36 708 xxx - Axor Citterio E (3 outlets). For use with finish sets: 36 703 xxx - Axor Citterio E (2 outlets) & 36 704 xxx - Axor Citterio E (3 outlets). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 32