Hansgrohe SE Approvals


#250402001

Range of wall mounted spout outlets (brass bodies - various finishes). The outlet incorporates a plastic aerator. Maximum operating temperature 60°C. Open outlet use only.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
250402001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
12 417 xx0 – AXOR on escutcheon 34 410 xx0 – AXOR on spout
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
12 417 xx0 34 410 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers, as examples: 000 = chrome finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241202037

Range of wall mounted, concealed, manually operated blending valves (brass bodies – various finishes) incorporating 1 way or 2 way function ceramic disc headworks. The products are supplied with single lever operating members. The inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
241202037
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Product to be installed with 01500180 iBox universal 2 Basic set.
Size:
Specifically for use with Hansgrohe iBox Universal (01500180) which has 1/2" BSP (F) inlets/outlets
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R040
Expiry date:
31/12/2029
Model:
75 414 xx0 hansgrohe DuoTurn Q 2 function 75 417 xx0 hansgrohe DuoTurn E 2 function 75 418 xx0 hansgrohe DuoTurn S 2 function 75 614 xx0 hansgrohe DuoTurn Q 1 function 75 617 xx0 hansgrohe DuoTurn E 1 function 75 618 xx0 hansgrohe DuoTurn S 1 function Models added April 2025: 48 415 xx0 & 48 615 xx0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2306093

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The product is supplied with 3/8” x 15mm reducers incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is to be used with an instantaneous water heater. Maximum working pressure: 10.0 bar Maximum operating temperature: 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2306093
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010 R150 R170
Expiry date:
30/06/2028
Model:
74806xxx – Zesis M33 – Single lever kitchen mixer 150, LowPressure/vented hot water cylinders, 1jet

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2306094

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Products incorporate an additional hose outlet and shut-off valve for use with an external domestic appliance. Maximum working pressure: 10.0 bar Maximum operating temperature: 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2306094
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2028
Model:
74807xxx – Zesis M33 – Single lever kitchen mixer 200, device shut-off valve, CoolStart, 1jet 74808xxx – Zesis M33 – Single lever kitchen mixer 200, device shut-off valve, 1jet

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2306045

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure: 10.0 bar Maximum operating temperature: 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2306045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2028
Model:
74802xxx – Zesis M33 – Single lever kitchen mixer 150, 1jet 74811xxx – Zesis M33 – Single lever kitchen mixer 150, Eco, 1jet 74813xxx – Zesis M33 – Single lever kitchen mixer 150, CoolStart, EcoSmart, 1jet 74815xxx – Zesis Lean M34 – Single lever kitchen mixer 150, 1jet

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241204022

Ceramic cartridge headwork with a plastic body and EPDM seals, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241204022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
26.92mm OD.
Marking:
HG on the body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
30 614 320.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250102027

Range of shower handsets (plastic bodies – various finishes), incorporating a plastic flow regulator on the inlet. Open outlet use only. Maximum operating temperature: 60 °C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250102027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Hansgrohe on Body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
26 014 xx0. Models added April 2025: 26 515 xx0 & 26 516 xx0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250104010

Range of wall mounted concealed, shower valves (brass bodies – various plated trim sets) incorporating a ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250104010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with a shower hose, handset, riser rail or spout outlet. Product to be used in combination with 01700180 AXOR iBox universal Basic set or 01400180 AXOR iBox universal 2 Basic set + 13588000 Adapter plate for iBox universal 2.
Size:
¾” BSP (F)
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
46450xx0 46451xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250302017

Wall mounted, bar type thermostatic blending valve, (brass bodies - various finishes), incorporating a half turn ceramic disc for manually diverting the flow between the shower handset, on off position, and the overhead shower with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button with a dome type operating member. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) x ½” BSP (M) offset unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
27 633 xx0. Models added April 2025: 24592xx0, 24593xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250304019

Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250304019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
24.8 OD cartridge
Marking:
AXOR on handle
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
38 121 xx0 38 122 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 39 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.