Hansgrohe SE Approvals


#240602019

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
240602019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Specifically for use with Hansgrohe iBox (01 800 180, 01 700 180 or 01 810 180) which has ¾” BSP (F) inlets
Marking:
Axor logo on face plate
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). 38 626 xx0 Axor Uno (single lever operating member) 45 605 xx0 Axor Uno (single lever operating member) 72 605 xx0 Hansgrohe Talis S (single lever operating member) 71 667 xx0 Hansgrohe Vernis Blend (single lever operating member) 71 668 xx0 Hansgrohe Vernic Shape (single lever operating member) Model added July 2024: 74 616 xx0 Where xxx and xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240604014

Single hole, single outlet (fixed) combination tap assembies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240604014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.
Marking:
Hansgrohe on body or operating member.
Installation Requirements:
R001 R008 R010 R006
Expiry date:
30/06/2029
Model:
73 311 xx0 hansgrohe Tecturis S Single lever basin mixer 110 without waste set 73 312 xx0 hansgrohe Tecturis S Single lever basin mixer 110 CoolStart without waste set 73 313 xx0 hansgrohe Tecturis S Pillar tap 80 with lever handle for cold water or pre-adjusted water without waste set 73 314 xx0 hansgrohe Tecturis S Single lever basin mixer 110 CoolStart with pop-up waste set 73 320 xx0 hansgrohe Tecturis SSingle lever basin mixer 110 Fine CoolStart with push-open waste set 73 321 xx0 hansgrohe Tecturis S Single lever basin mixer 110 Fine CoolStart without waste set 73 323 xx0 hansgrohe Tecturis S Single lever basin mixer 110 Fine CoolStart with pop up-waste set 73 340 xx0 hansgrohe Tecturis S Single lever basin mixer 150 Fine CoolStart with push-open waste set 73 341 xx0 hansgrohe Tecturis S Single lever basin mixer 150 Fine CoolStart without waste set 73 370 xx0 hansgrohe Tecturis S Single lever basin mixer 240 Fine CoolStart for wash bowls with push-open waste set 73 372 xx0 hansgrohe Tecturis S Single lever basin mixer 240 Fine CoolStart for wash bowls without waste set 73 301 xx0 hansgrohe Tecturis S Single lever basin mixer 80 CoolStart EcoSmart+ without waste set 73 302 xx0 hansgrohe Tecturis S Single lever basin mixer 80 CoolStart EcoSmart+ with pop-up waste set 73 001 xx0 hansgrohe Tecturis E Single lever basin mixer 80 Cool Start EcoSmart+ without waste set 73 002 xx0 hansgrohe Tecturis E Single lever basin mixer 80 CoolStart EcoSmart+ with pop-up waste set 73 010 xx0 hansgrohe Tecturis E Single lever basin mixer 110 EcoSmart+ with pop-up waste set 73 011 xx0 hansgrohe Tecturis E Single lever basin mixer 110 EcoSmart+ without waste set 73 012 xx0 hansgrohe Tecturis E Single lever basin mixer 110 CoolStart EcoSmart+ without waste set 73 013 xx0 hansgrohe Tecturis E Pillar tap 80 EcoSmart+ with lever handle for cold water or pre-adjusted water without waste set 73 014 xx0 hansgrohe Tecturis E Single lever basin mixer 110 CoolStart EcoSmart+ with pop-up waste set 73 020 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with push-open waste set 73 021 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with push-open waste set 73 023 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with pop up-waste set 73 040 xx0 hansgrohe Tecturis E Single lever basin mixer 150 Fine CoolStart EcoSmart+ with push-open waste set 73 041 xx0 hansgrohe Tecturis E Single lever basin mixer 150 Fine CoolStart EcoSmart+ without waste set 73 070 xx0 hansgrohe Tecturis E Single lever basin mixer 240 Fine CoolStart EcoSmart+ for wash bowls with push-open waste set 73 072 xx0 hansgrohe Tecturis E Single lever basin mixer 240 Fine CoolStart EcoSmart+ for wash bowls without waste set 73 310 xx0 hansgrohe Tecturis S Single lever basin mixer 110 EcoSmart+ with pop up waste set Additional information. (list any further information regarding the product or range, e.g.: key for model code, prefix/suffixes describing finishes, variants of operating member, etc.) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240602029

Range of single hole, single outlet, swivel, combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a flow regulator and plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C (Model 72 816 xx0) Maximum operating temperature 65.0°C (Model 71 861 xx0)

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240602029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2029
Model:
71 861 xx0 72 816 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240602049

Range of wall mounted, three-hole single outlet (fixed) bath and shower mixers with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with cross top or single lever operating members (see model) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0655 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
240602049
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Axor logo on spout
Installation Requirements:
R001 R030
Expiry date:
30/06/2029
Model:
10 303 180 Basic set for 3-hole wall mixer for concealed installation, which must be installed in conjunction with the following models: 39 441 xx0 (Cross Top) 39 447 xx0 (Cross Top) Models added June 2024: 39 442 xx0 (Single Lever) 39 448 xx0 (Single Lever) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240788005

Range of wall mounted, thermostatic blending valves, (brass bodies various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with a manual override button incorporating dome or lever type operating members, each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower handset, hose and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240788005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) x 1/2" BSP (M) offset unions
Marking:
Blending valve - Hansgrohe on body. Shower hose - Hansgrohe on captive nut. Shower handset - Hansgrohe on faceplate. Riser rail - Hansgrohe on handset holder.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
24 261 xx0 - hansgrohe | Pulsify Select S - Shower system105 3jet Relaxation EcoSmart with Ecostat Fine and shower bar 90 cm, 24 262 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Fine and shower bar 65 cm, 24 271 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Element and shower bar 90 cm, 24 272 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Element and shower bar 65 cm. Model added July 2024: 24 243 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Life and shower bar 65 cm.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240702039

Wall mounted, two hole, single outlet (swivel) combination tap assembly incorporating a brass body (various finishes) and a ceramic cartridge headwork with joystick operating member. The spout outlet incorporates a plastic aerator. The spout outlet connections also incorporate a plastic flow regulator and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The spout outlet incorporates a plastic flow regulator with stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240702039
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Axor on spout body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
38 815 XXX AXOR Uno Single lever kitchen mixer for concealed installation wall-mounted XXX denotes the surface finish (which is a non-water part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240704008

Concealed, floor mounted basic set with DZR brass body. For use with floor standing combination tap assemblies. Maximum operating pressure 10 bar. Maximum operating temperature 70°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240704008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Hansgrohe & DR
Installation Requirements:
R001 R010
Expiry date:
31/07/2029
Model:
10452180
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240704023

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240704023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M
Marking:
Hansgrohe on face plate.
Installation Requirements:
R001 R160 R576
Expiry date:
31/07/2029
Model:
58 123 xx0 58 125 180 58 126 180 58 127 xx0 58 128 xx0
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240704029

Range of wall mounted, two-hole, single outlet, (fixed), combination tap assemblies, (brass bodies – various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10 bar. Maximum operating temperature 60°C 13 623 180 rough-in set does not form as part of this approval.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240704029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
AXOR on face plate
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
38 112 xx0 38 113 xx0 38 115 xx0 38 116 xx0 39 112 xx0 39 113 xx0 39 114 xx0 39 115 xx0 39 116 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Product to be installed in combination with 13623180
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240704050

AXOR UNO Range of single-hole, single outlet, (fixed) over the rim bidet combination tap assemblies, (brass bodies – various finishes). Incorporating ceramic cartridge headworks with single lever or dome type operating members. The spout outlets incorporate plastic aerators. The products are supplied with lever operated pop-up waste (not verified by test). Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240704050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
38 211 xx0 45 200 xx0
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 36 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.