Hansgrohe SE Approvals


#240202015

Range of wall mounted, thermostatic blending valves (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member, temperature is controlled via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product is supplied with a shower hose, handset and overhead shower. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240202015
Size:
For use with rough kit 10902180 which has ½” BSP (M) inlets
Marking:
Axor on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
12 672 xx0 Axor Starck Shower column with thermostat and overhead shower 240 1jet 13 608 xx0 Axor Starck Extension set 80mm Where xx0 denotes the finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202027

Pillar tap with (brass body - various finishes) incorporating a quarter turn ceramic disc headwork situated on the spout outlet with a cylinder type operating member. The spout outlet incorporates a plastic spray disc and a flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
240202027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8 captive nut end connections
Marking:
AXOR on body
Installation Requirements:
R001 R006 R009
Expiry date:
28/02/2029
Model:
12 110 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202033

Range of four-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240202033
Size:
Specifically for use with rough kit 13 444 180 or 15 480 180 which both have ½” BSP (M) inlets
Marking:
Axor or Hansgrohe on spout
Installation Requirements:
R001 R006 R020
Expiry date:
28/02/2029
Model:
39 446 xx0 (lever) 39 445 xx0 (cross top) 31 442 xx0 (lever) 16 546 xx0 (cross top) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204013

Range of wall mounted, thermostatic blending valves, (brass bodies various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow.Temperature is controlled independently via a thermostatic cartridge with a manual override button incorporating dome or lever type operating members, Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240204013
Size:
½” BSP (M) x ¾” BSP (M) offset unions.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
13 113 xx0 Hansgrohe Ecostat 13 116 xx0 Hansgrohe Ecostat 13 117 xx0 Hansgrohe Ecostat 15 368 xx0 Hansgrohe Versostat 13 324 xx0 Hansgrohe Ecostat Fine 13 346 xx0 Hansgrohe Element Models added May 2024: 13 323 xx0 & 13 382 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202056

Range of overhead shower outlets with chromium plated plastic bodies. The inlets incorporate combined EPDM washers and stainless-steel strainers. Maximum working pressure: open outlet use only Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202056
Size:
12.59mm OD
Marking:
Axor on body.
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
12 596 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202060

Range of shower arms and ceiling connectors (brass bodies – various finishes) & overhead shower outlets (plastic bodies - various finishes), incorporating EPDM O rings, plastic flow regulators and stainless-steel strainers. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202060
Size:
½” BSP M ½” BSP F 15mm Spigot
Marking:
Hansgrohe logo on side of shower
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
Raindance Select S: 30 149 198 Overhead shower 240 2jet, 30 149 298 Overhead shower 300 2jet, 26 466 xx0 Overhead shower 240 2jet with shower arm, 26 467 xx0 Overhead shower 240 2jet with ceiling connector, 27 378 xx0 Overhead shower 300 2jet with shower arm, 27 337 xx0 Overhead shower 300 2jet with ceiling connector. -020 PVD polished chrome -260 PVD brushed chrome. -830 PVD polished nickel -820 PVD brushed nickel. -990 PVD polished gold optic -250 PVD brushed gold optic. -300 PVD polished red gold -310 PVD brushed red gold. -130 PVD polished bronze -140 PVD brushed bronze. -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass. -800 PVD stainless steel optic
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202062

Range of shower arms and ceiling connectors (brass bodies – various finishes) & overhead shower outlets (plastic bodies - various finishes), incorporating EPDM O rings, plastic flow regulators and stainless-steel strainers. Open outlet use only. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202062
Size:
See models
Marking:
AXOR on body
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
½” BSP (F) on models 35 373 xxx Overhead shower 245/185 1jet 35 383 xxx Overhead shower 220 1jet EcoSmart 35 389 xxx Overhead shower 245 1jet EcoSmart+ 35 374 xxx Overhead shower 245/185 1jet EcoSmart 35 387 xxx Overhead shower 245/185 1jet EcoSmart+ 35 382 xxx Overhead shower 220 1jet 35 388 xxx Overhead shower 220 1jet EcoSmart+ 35 380 xxx Overhead shower 245 1jet 35 381 xxx Overhead shower 245 1jet EcoSmart ½” BSP (M) X ½” BSP (M) on models: 26 433 xxx Ceiling connector 300 mm 26 436 xxx Shower arm 390 mm square 26 965 xxx Ceiling connector 100 mm softsquare 26 432 xxx Ceiling connector 100 mm 26 431 xxx Shower arm 390 mm 26 437 xxx Ceiling connector 100 mm square 26 438 xxx Ceiling connector 300 mm square 26 966 xxx Ceiling connector 300mm softsquare 26967 xxx Shower arm 390mm softsquare ADDITIONAL INFORMATION: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204024

Range of wall mounted thermostatic shower valves incorporating detent headworks controlling the flow. Temperature is controlled via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with a shower hose, shower handset and over head shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240204024
Size:
1/2” BSP (M)
Marking:
Hansgrohe on body, hand shower and overhead shower.
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
24 220 xx0 hansgrohe Pulsify S Showerpipe 260 1jet with ShowerTablet Select 400 24 221 xx0 hansgrohe Pulsify S Showerpipe 260 1jet EcoSmart with ShowerTablet Select 400 24 240 xx0 hansgrohe Pulsify S Showerpipe 260 2jet with ShowerTablet Select 400 24 241 xx0 hansgrohe Pulsify S Showerpipe 260 2jet EcoSmart with ShowerTablet Select 400 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204039

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240204039
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP captive nut end connections.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
28/02/2029
Model:
73060xxO 73360xxO

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204025

Wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating detent headworks controlling flow to either bath or shower. A thermostatic cartridge controlling the temperature incorporating a manual override button. The spout outlet incorporates a plastic aerator. Inlets incorporate a approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240204025
Size:
½” BSP (M)
Marking:
Hansgrohe on body, hand shower and overhead shower.
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
24 230 xx0 hansgrohe Pulsify S Showerpipe 260 1jet with bath thermostat ShowerTablet 400 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 33 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.