Range of single hole, single outlet (fixed) combination tap assembly (various finishes, see models), incorporating ceramic cartridge headworks with single lever operating members. The products incorporate self-cancelling diverters to shower outlets and plastic aerators in the spouts. Not supplied with hose and handset. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212065

Expiry date:

31/12/2027

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with 3/8" BSP captive nuts

Marking:

Hansgrohe on operating Member

Installation Requirements:

R001 R006 R030 R009

Model:

71 312 xxx 72 436 xxx 72 437 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets with plastic bodies. The inlets incorporate a stainless-steel strainer and a built-in flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212066

Expiry date:

31/12/2027

Size:

½” BSP male inlet

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

28760210, 28787640, 28788570

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Model 32 020 000 is supplied with a pop-up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212067

Expiry date:

31/12/2027

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

32 020 xxx - Talis S (with Pop-up Waste). 32 031 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, metal, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic disc headwork controlling the temperature with a single lever operating member and a push on/off button cartridge controlling the flow. The spout outlet incorporates a plastic aerator. Supplied with a lever pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212071

Expiry date:

31/12/2027

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided, PEX lined hoses incorporating 3/8" BSP captive nuts

Marking:

AXOR on Body

Installation Requirements:

R001 R006 R010 R009

Model:

45 016 xxx Axor Uno Select basin mixer 220 with pop-up waste set available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, thermostatic shower valves with brass bodies (chrome plated finish), incorporating a ceramic disc headwork controlling the flow to an overhead or hand shower. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. The product also incorporates stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower handset and hose. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2212072

Expiry date:

31/12/2027

Size:

¾” BSP (M) X ½” BSP (M) offset union.

Marking:

Hansgrohe on Body and on Hand shower Holder

Installation Requirements:

R001 R010 R040

Model:

27 247 400 Hansgrohe Croma Select S SemiPipe Multi with thermostat 27 248 400 Hansgrohe Croma Select E SemiPipe Multi with thermostat 27 249 400 Hansgrohe Croma Select S SemiPipe Multi EcoSmart with thermostat 27 259 400 Hansgrohe Croma Select E SemiPipe Multi EcoSmart with thermostat

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of exposed thermostatic shower valves with brass bodies (various finishes) incorporating a half turn ceramic disc headwork controlling the flow between 2 outlets, with the temperature being controlled independently via a thermostatic cartridge both with a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2212074

Expiry date:

31/12/2027

Size:

½” BSP (M)

Marking:

HANSGROHE on valve body, handset and overhead shower.

Installation Requirements:

R001 R010 R040

Model:

27 112 xxx Hansgrohe Raindance E Showerpipe 360 1jet with thermostat 27 112 400 Hansgrohe Raindance E Showerpipe 360 1jet with thermostat 27 134 xxx Hansgrohe Raindance E Showerpipe 360 1jet with thermostat Nordic 27 134 400 Hansgrohe Raindance E Showerpipe 360 1jet with thermostat Nordic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower heads with plastic bodies (various finishes), incorporating plastic strainer or flow restrictor and EPDM o rings with stainless-steel strainers on the inlets. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212078

Expiry date:

31/12/2027

Size:

½” BSP (M)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Model:

26 810 400 Hansgrohe Croma Select E Hand shower Multi 26 811 400 Hansgrohe Croma Select E Hand shower Multi EcoSmart 9 l/min 26 812 400 Hansgrohe Croma Select E Hand shower Vario 26 813 400 Hansgrohe Croma Select E Hand shower Vario EcoSmart 9 l/min 26 814 400 Hansgrohe Croma Select E Hand shower 1jet 26 815 400 Hansgrohe Croma Select E Hand shower 1jet EcoSmart 9 l/min 26 816 400 Hansgrohe Croma Select E Hand shower 1jet EcoSmart 7 l/min

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes – see models) incorporating half turn manual diverter headworks with single lever operating members controlling the flow to an overhead shower and a bath spout with an off position and a self-cancelling diverter to shower outlet on the bath spout. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member with a manual override button. The spout outlet incorporates a plastic aerator, and the inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset and an overhead shower. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0503 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self cancelling diverter to shower.

WRAS Approval Number:

2212079

Expiry date:

31/12/2027

Size:

¾” BSP (M) to ½” BSP (M) Offset Unions

Marking:

Hansgrohe on body, shower head, and hand shower

Installation Requirements:

R001 R030

Model:

27 113 xxx 27 113 400 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Crometta 85 range of chrome plated plastic shower outlets, incorporating EPDM washers and flow regulator and stainless-steel strainer at the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212080

Expiry date:

31/12/2027

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on face.

Installation Requirements:

R001 R040

Model:

28 423 xxx 28 424 xxx 28 425 xxx xxx denotes the surface finish. It will always be 3 digits, which can be: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets with plastic bodies (various finishes), EPDM O-rings and a stainless-steel strainer. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2212081

Expiry date:

31/12/2027

Size:

For use with 01 800 180 basic set

Marking:

Hansgrohe on shower face.

Installation Requirements:

R001 R040

Model:

26 468 xxx Hansgrohe Raindance Select E Overhead shower 300 3jet with shower arm 26 468 400 Hansgrohe Raindance Select E Overhead shower 300 3jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Wasselonne S.A.S

Company Name

Hansgrohe Wasselonne S.A.S

Address

Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company