‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Expiry date:

31/10/2027

Note:

R008 does not apply to the stainless steel body models.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Factor:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of differential (DPI) or relative (RPI) pressure sensors (with or without temperature transmitter) with stainless steel bodies and EPDM ‘O’-rings. The DPI2 model consists of a sensor and fitting for a capillary tube which is used for measuring the differential pressure between either sides of the sensor. Maximum working pressure 30.0 Bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2212913

Expiry date:

31/12/2027

Size:

Sensor alone: ½” BSP (M). Sensor with adaptor: ¼" NPT (M), ½" NPT (M), ½" BSPP (M). Capillary tube (DPI2 models): ¼" BSPT (M).

Marking:

Grundfos name and logo, model, product no., version no., series no., technical information, and manufacturing country on adhesive label on body.

Installation Requirements:

R001

Model:

DPI2 sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF DPI2 with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be DPI Range and unit: [B] - Of no importance to wetted parts* Gen.: [C] - Must be 2 Output: [D] Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] Of no importance to wetted parts* Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts Materials: [G] - Must be either -- or -B, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. RPI sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF RPI with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be RPI Range and unit: [B] - Of no importance to wetted parts*, Gen.: [C] - Of no importance to wetted parts*, Output: [D] - Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] - Of no importance to wetted parts*, Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts, Materials: [G] - Must be either -- or -S, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. Code for sealing [F]: “E” = EPDM ‘O’-rings. Code for materials [G]: "B" = brass fitting, "S" = stainless steel fitting, "--" = sensor only (w/o accessory). Code for connection [H]: "02N" = 1/4" NPT, "02B" = 1/4" BSPT, "03N" = 1/2" NPT, "03P" = 1/2" BSPP, "---" = sensor only (w/o accessory). * All characters are allowed.

Factor:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Manufacturer:

Grundfos Operations A/S

Company Name

Grundfos Operations A/S

Address

Poul Due Jensens Vej 11 DK-8850 Bjerringbro DENMARK & Birkevænget 2-10 DK-8850 Bjerringbro DENMARK

View All Listings by this Company

TP series 200 range of single stage pumps with electrocoated cast iron or bronze bodies, stainless steel impellers and EPDM ‘O’-rings. (TPE models are only available with electrocoated cast iron bodies). The products can incorporate the following shaft seal variations: BQQE (silicon carbide-silicon carbide) & BQBE (Silicon carbide-carbon). The TPE pumps are available with or without a sensor. Maximum working pressure 16.0 bar (TP and TPE40-XXX/2 and TP and TPE40 XXX/2 models). All other models 10.0 bar. Maximum operating temperature: Bronze models are 85°C, cast iron models are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210908

Expiry date:

31/10/2027

Size:

TP(E)(D) 32: DN32 Flange (inlet/outlet), TP(E)(D) 40: DN40 Flange (inlet/outlet), TP(E)(D) 50: DN50 Flange (inlet/outlet), TP(E)(D) 65: DN65 Flange (inlet/outlet), TP(E)(D) 80: DN80 Flange (inlet/outlet) & TP(E)(D) 100: DN100 Flange (inlet/outlet).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, Product/Version number, technical info and manufacturing country on data plate on body.

Installation Requirements:

R001 R415

Model:

TP series 200 pumps: TP (E)(D) 32/40/50/65/80/100. Example Code: TP E D 40 -270 /2 S -A -F -A -BQQE -H C B Where: TP = Pump range. E = Electronically speed-controlled pump. D = Twin-head pump (optional). 40 = Nominal diameter of inlet and outlet ports (DN), 2 or 3 digits, value range 32/40/50/65/80/100. -270 = Maximum head [dm], 2 to 4 digits, value range from 30 to 390. /2 = Pole number (TP/TPE 40 models), one digit, value range 2/4. S = Code for sensor version: [Blank]: with MGE motor and without sensor, S: with factory-fitted differential-pressure sensor. A = Code for pump version. Can either be A, X, A+E, X+E. A: Basic Version, X: Special version, (+E): With certificate or test reports, the second character of the code for pump version is an "E". F = Code for pipe connection: DIN flange. A = Code for materials. Can either be A or Z. A: Basic version. Z: Bronze pump housing and motor stool. BQQE = Code for shaft seal including other plastic and rubber pump parts, except the neck ring. Can be BQQE (silicon carbide-silicon carbide) or BQBE (Silicon carbide-carbon). -H = Code for rated motor power [kW] - will be a letter or a number, please consult installation and operating instructions. C = Code for phase and voltage or other information [V] - will be a letter, please consult installation and operating instructions. B = Code for speed variant [rpm] - will be a letter or number, please consult installation and operating instructions.

Factor:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Manufacturer:

GRUNDFOS Manufacturing Ltd.

Company Name

GRUNDFOS Manufacturing Ltd.

Address

Ipari Park Búzavirág u. 14. Tatabánya, 2800

View All Listings by this Company

CR(I)(N)(E) ranges of multistage centrifugal pumps incorporating stainless steel impellers, intermediate chamber and outer sleeve. CR(E) versions have cast iron bases and pump heads coated with black cathodic paint. CRI(E) and CRN(E) versions have stainless steel bases and pumpheads. The pumps are available with the following shaft seals HQQ*, HUU*, HUB*, HQB*, where * can be E for EPDM and V for FKM. Maximum working pressures: CR1, 3 or 5 (2-36 stages) Oval flange: 16.0 bar. CR1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange: 25.0 bar CRI/N1, 3 or 5 (2-36 stages) Flexi clamp with oval flange connection: 16.0 bar CR/I/N1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange, PJE, Flexi clamp or Triclamp: 25.0 bar CR10 (1-16 stages) Oval flange or DIN/ANSI/JIS flange: 16.0 bar. CR10 (17-22 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI10 (1-16 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI10 (17-22 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar CRN10 (1-22 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR15 or 20 (1-7 stages) Oval flange: 10.0 bar. CR15 or 20 (1-10 stages) DIN/ANSI/JIS flange: 16.0 bar. CR15 or 20 (11-17 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI15 or 20 (1-7 stages) Flexi clamp with oval flange connection: 10.0 bar CRI15 or 20 (1-10 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI15 or 20 (11-17 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CRN15 or 20 (1-17 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR models: Cold water use only. CRI/CRN models: Cold water use only and from April 2023 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210906

Expiry date:

31/10/2027

Size:

Oval flange: Rp 1” - 2”. Flexi Clamp Base: Small Base (CR/I/N1/1(s)/3/5) Ø32, Medium Base (CR/I/N15/20) Ø50. Triclamp Base Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50. Flange Base: Small Base (CR/I/N1/1(s)/3/5) DN25/32, Medium Base (CR/I/N15/20) DN40 and 50. PJE Base: Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50.

Marking:

Grundfos and Grundfos logo, type, Model, Product/Version no., technical info, temperature (WRAS 23C or WRAS 99C), manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Model:

CR(I)(N)(E) 1(s) range with 2-36 stages, CR(I)(N)(E) 3 range with 2-36 stages, CR(I)(N)(E) 5 range with 2-36 stages, CR(I)(N)(E) 10 range with 1-22 stages, CR(I)(N)(E) 15 range with 1-17 stages, CR(I)(N)(E) 20 range with 1-17 stages. Model keycode: CR(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRI(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRN(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE. Where: CR = Pump type and Cast Iron, I = EN 1.4301, N = EN 1.4401, E = Preminum Electronically Controlled Motor, C = Core (Basic) with Electronically Controlled Motor. 1/3/5/10/15/20 = Flow rate [m³/h], (s) = Reduced impeller version. A = No. of stages. B = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange. C = Code for pipe connection: A = Oval flange, CA = Flexi clamp, CX = TriClamp, F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). D = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. E = Code for rubber parts: E = EPDM, V = Viton. XXX = Code for shaft seal: HQQ, HUU, HUB, HQB. [H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide]. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Factor:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301900

Expiry date:

31/01/2028

Size:

CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.

Marking:

Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Model:

CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Factor:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company