Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2210337

Expiry date:

31/10/2027

Size:

Nylon braided, PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Grohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

23330001 BauEdge

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

View All Listings by this Company

Range of wall mounted concealed thermostatic blending valves with plastic bodies (various finished face plates). The flow is controlled by a ceramic disc diverter headworks with a cube type operating members. The temperature is controlled by a thermostatic cartridge with dome type operating members incorporating a manual override button. Both inlets incorporate an approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2210338

Expiry date:

31/10/2027

Size:

24mm Ø

Marking:

Grohe on housing

Installation Requirements:

R001 R020

Model:

Grotherm Cube range 24155000 – Chrome Plated 24155AL0 – Brushed Hard Graphite 24155DC0 – Supersteel

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

View All Listings by this Company

Wall mounted thermostatic shower valve with brass body (various finishes), incorporating a ceramic disc diverter that controlling the flow with a cube type operating member. The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2210339

Expiry date:

31/10/2027

Size:

24mm Ø

Marking:

Grohe on housing

Installation Requirements:

R001 R010 R020

Model:

Grotherm Cube range 24154000 – Chrome Plated 24154AL0 – Brushed Hard Graphite 24154DC0 – Supersteel

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies) incorporating ceramic cartridge headwork and single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2210341

Expiry date:

31/10/2027

Size:

Polyamide (PA) braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections

Marking:

Grohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

30334001 Start 31868000 Eurosmart

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

View All Listings by this Company

Wall mounted thermostatic shower mixer with brass body (chrome plated), incorporating a ceramic cartridge headwork ,controlling the flow and temperature and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2211329

Expiry date:

30/11/2027

Note:

Product is not supplied with a shower hose and handset.

Size:

3/4” BSP (F) captive nuts. Supplied with ½” x ¾” BSP (M) offset unions

Marking:

Grohe on operating member.

Installation Requirements:

R001 R010 R040

Model:

23.633.001 Bauloop

Factor:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Wall mounted shower mixer with brass body (chrome plated face plate), incorporating a ceramic cartridge headwork ,controlling the flow and temperature with single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2211330

Expiry date:

30/11/2027

Size:

½” BSP (F)

Marking:

Grohe on operating member.

Installation Requirements:

R001 R010 R040

Model:

29.080.001 Bauloop

Factor:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (chrome plated, brass bodies), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever operated pop-up waste.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2211332

Expiry date:

30/11/2027

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.

Marking:

Grohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

Essence range: 24183001 23379001

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

View All Listings by this Company

Range of single hole, single outlet (fixed) pillar tap with brass bodies (chrome plated), incorporating ceramic disc headwork and single lever operating member. Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2211323

Expiry date:

30/11/2027

Size:

1/2" BSP (M)

Marking:

Grohe on body

Installation Requirements:

R001 R006 R009 R010

Model:

30.978 Hospita

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Phone

02372 930

View All Listings by this Company