Grohe AG Approvals


#1906079

Wall mounted, two-hole, single outlet, fixed, combination tap assembly (chromium plated brass) incorporating ‘detent’ headworks (push on/push off) that incorporates a quarter turn ceramic disc (rotary control) to adjust flow. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The spout outlet incorporates a plastic aerator and the product is supplied with a shower hose and handset, as well as an overhead shower. Both shower outlets incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906079
Expiry date:
30/06/2024
Size:
½” BSP M (off-set unions)
Marking:
Grohe logo on TMV, hand shower, overhead shower
Installation Requirements:
R001 R010 R040
Model:
26 510
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#1906100

Range of wall mounted, concealed thermostatic shower valves, comprising of a concealed body and trim set (chrome plated brass), an overhead shower and a shower handset. The flow is controlled by a 3-position manual diverter with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906100
Expiry date:
30/06/2024
Size:
½” BSP (F)
Marking:
Grohe on facepate, headshower and handshower
Installation Requirements:
R001 R010 R040
Model:
Grohe ‘Grohtherm’ THM 34.734 & 34.735
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#1906104

Range of wall mounted, concealed, shower valve (chromium plated brass), incorporating a ceramic disc diverter with a dome type operating member controlling the flow between an overhead shower outlet and a shower hose and handset. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset incorporates a plastic strainer on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906104
Expiry date:
30/06/2024
Size:
½” BSP (F)
Marking:
Grohe on faceplate
Installation Requirements:
R001 R010 R040
Model:
Grohtherm THM 34.727 & 34.729
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#1906309

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with A single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906309
Expiry date:
30/06/2024
Note:
No testing on pop-up waste
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R006 R009 R010
Model:
Grohe Eurodisc Cosmopolitan OHM 32.054.003
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#1906340

Grohe ‘RSH 310’ range of ceiling mounted or wall mounted shower outlets having brass arms. Shower heads incorporate a plastic filter and a plastic flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1906340
Expiry date:
30/06/2024
Size:
½ BSP (M)
Marking:
Grohe on face of shower
Installation Requirements:
R001 R040
Model:
Grohe ‘RSH 310’ Mono: 26.557, 26.558, 26.559, 25.560, 26.561, 26.561.LS0, 26.562 & 26.562.LS0
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 32

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.