Grohe AG Approvals


#250702032

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250702032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP male.
Marking:
GROHE logo on top of spout
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2030
Model:
25.216.000
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250702047

Range of concealed stop-valve trim sets with (brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork and single lever operating member. Maximum working pressure 10.0 Bar. Maximum operating temperature 23C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
250702047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with either concealed set 35.028.000 - ½” BSP (F) or 29.032.000 – ¾” BSP (F)
Marking:
Grohe, Germany and DOM (YYMM) on body
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
29.396.XXX, 29.397.XXX
Product Images

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930

View All Listings by this Company

Print This Approval


#250902011

Wall mounted shower valve (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
250902011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) offset union
Marking:
Grohe logo on operating member
Installation Requirements:
R001 R040
Expiry date:
30/09/2030
Model:
33.555.002
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#251008301

Section:
0650 Combination Tap Assemblies
Description:
A Range of Three hole tap(s) with a single outlet and a fixed spout.
Wall Mounted Undefinable Air Gap - See IRN's Product requires a manifold which is not supplied as part of this approval.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
20.189.002VariousG 1/2"10 bar65 °CGroheSpoutNo1/4 Turn ceramic diskNot ApplicableAerator
20.193.002VariousG 1/2"10 bar65 °CGroheSpoutNo1/4 Turn ceramic diskNot ApplicableAerator

Notes & Further Information

Where xxx denotes finish, can be replaced by: 002 – Chrome DC2 – Supersteel DA2 – Warm sunset AL2 – Brushed hard graphite A02 – hard graphit DL2 – brushed warm sunset GN2 – brushed cool sunrise A02 – hard graphite MS2 – satin steel GL2 – cool sunrise MS2 – satin graphite

Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#251008302

Section:
1650 Shower Outlets
Description:
A Shower head(s) and/or shower handset(s).
Ceiling Mounted. Undefinable Air Gap - see IRNs.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R040
Expiry date:
31/10/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
26.477.xxxVariousG 1/2"Open Outlet bar65 °CGroheShower faceplateNoFixed Head,

Notes & Further Information

Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset LS0 – moon white AL0 – Brushed hard graphite DL0 – brushed warm sunset GN0 – brushed cool sunrise GL0 – cool sunrise MG0 – satin graphite MS0 – satin steel A00 – hard graphite BE0 – polished nickel EN0 – brushed nickel

Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 28 of 31

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.