Grohe AG Approvals


#2310349

Range of wall mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating manual diverters, which also controls the flow, using dome type operating members. Also incorporates thermostatic mixing valves also using dome type operating members with manual override buttons. The spout outlet incorporates a plastic aerator. Both inlets and shower outlet incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). These products are not supplied with shower hose or handsets. Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2310349
Expiry date:
31/10/2028
Size:
½” x ¾” BSP (M) offset unions.
Marking:
Grohe on body.
Installation Requirements:
R001 R010 R040
Model:
34816003 - Grotherm 1000, 34155003 - Grotherm 1000.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#2310355

Ceiling mounted shower outlet with chromium plated brass body, EPDM o-rings and a plastic flow regulator at the inlet. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2310355
Expiry date:
31/10/2028
Note:
Open outlet use only
Size:
½” BSP (M).
Marking:
Grohe on faceplate.
Installation Requirements:
R001 R040
Model:
26.063.000 - Rainshower Cosmo.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#2309323

Thermostatic blending valve with brass body (chrome plated), incorporating a thermostatic cartridge controlling the temperature and dome type operating member. The inlets incorporate a stainless steel strainer and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. 47.533 is the connection set for use with the valve. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2309323
Expiry date:
30/09/2028
Size:
Grohtherm Micro 47.533 - Stainless steel braided, PEX lined flexible hose assemblies incorporating a 3/8” captive nut. Grohtherm Micro 34.487 - 3/8" BSP (M)
Marking:
Grohe on operating member.
Installation Requirements:
R001 R009 R040
Model:
Grohtherm Micro 34.487 (valve) Grohtherm Micro 47.533 (connection set).
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2310352

Wall mounted, metal, single outlet, fixed combination tap assemblies. Flow is controlled by a solenoid valve activated by via an infra-red sensor and temperature adjusted via a single lever operating member. The Inlets incorporate stainless steel strainers & approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310352
Expiry date:
31/10/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" captive nut end connections.
Marking:
Grohe logo on body.
Installation Requirements:
R001 R009 R040
Model:
Grohe “Eurosmart CE” - 36.376. Grohe “Eurosmart CE” - 36.315, Grohe “Eurosmart CE” - 36.412. To be installed with installation set 36.339.001.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#2311309

Range of wall mounted two-hole, single outlet (fixed) comination tap assemblies with brass bodies (chromium plated), ceramic cartridge headworks and single lever operating members. Spout outlets incorporate plastic aerators. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2311309
Expiry date:
30/11/2028
Size:
1/2" BSP (F).
Marking:
Grohe logo on spout.
Installation Requirements:
R001 R010 R040
Model:
Trimsets: 19.997 - EUROCUBE JOY, 19.998 - EUROCUBE JOY. Models to be used with concealed rough set: 23.429.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval


#2311342

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311342
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” BSP (31.687) or 3/8” BSP (all other models) captive nut end connections.
Marking:
Grohe on Operating Member
Installation Requirements:
R001 R006 R009 R010
Model:
31.680 - BAUECO, 31.685 - STARTECO, 31.686 - STARTECO, 31.687 - STARTECO.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311357

Self-closing basin tap (chromium plated brass), incorporating a self-closing headwork with dome type operating memeber. Temperature is controlled independently by a manual lever. Spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete assembly has not been tested to demonstrate backflow protection.. Maximum working pressure 10.0 bar.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2311357
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined hose with 3/8" BSP captive nut end connectors.
Marking:
Grohe Logo etched on body
Installation Requirements:
R001 R006 R009 R010
Model:
36.317 - EUROSMART CT.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311358

Range of four hole, single outlet (fixed) combination tap assemblies (brass, in various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter to shower outlet, with stainless steel braided silicone lined flexible interconnecting hoses. The connection to shower outlet incorporates a single check valve, verified by test (suitable for backflow prevention against Fluid Category 2). The spout outlet incorporates a plastic aerator. The product is also supplied with a shower hose and handset. Supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2311358
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies with 1/2” captive nut end connections.
Marking:
Grohe logo on spout body.
Installation Requirements:
R001 R007 R009 R030
Model:
19.578.XX1 - ESSENCE. XX1 indicates different available coloured finishes: 001 = chrome, DC1 = supersteel, GN1 = brushed cool sunrise, GL1 = cool sunrise, EN1 = brushed nickel, DL1 = brushed warm sunset, DA1 = warm sunset, BE1 = polished nickel, AL1 = brushed hard graphite, A01 = hard graphite.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311359

Self-closing shower mixer (chromium plated brass) incorporating spring loaded non-concussive headworks with dome type operating member. Temperature is adjusted manually with a dome type operating member. Both inlets and the shower outlet incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The inlets also incorporate a stainless steel strainer. Shower hose, handset or headset are not supplied supplied with this product. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2311359
Expiry date:
30/11/2028
Size:
1/2” BSP (M) x ¾” BPS (M) offset unions.
Marking:
Grohe logo on front body.
Installation Requirements:
R001 R010 R040
Model:
36.320 - Eurosmart CT.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311360

Self-closing concealed shower valve assembly with (DZR) brass body incorporating a non-concussive headwork and dome type operating member (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2311360
Expiry date:
30/11/2028
Size:
½ BSP (F).
Marking:
Grohe logo on operating member, flow arrow and DR on body.
Installation Requirements:
R001 R040
Model:
36.268 EUROECO CT.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 14 of 16

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.