Grohe AG Approvals


#2312327

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with a lever type pop-up waste. Maximum working pressure: 10 Bar. Maximum operating temperature: 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
2312327
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2028
Model:
32 108 al3, 32 108 003, 32 108 dc3.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2312348

Wall mounted, two-hole, single outlet, (fixed), combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a joy stick type operating member. The product incorporates a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic flow straightener. The shower outlet incorporates an approved check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2312348
Size:
½” BSP (M) x ¾” BSP (M) offset union
Marking:
Grohe on top and rear of body
Installation Requirements:
R001 R030
Expiry date:
31/12/2028
Model:
23.666 - Eurocube Joy

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2312350

Wall mounted, manually operated shower mixer valve (chromium plated brass body), incorporating a ceramic cartridge with a joystick type operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2312350
Size:
½” BSP (M) x ¾” BSP (M) offset union
Marking:
Grohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
23.665 - EUROCUBE JOY

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240102705

Filter cartridge with plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1055 Filter Cartridges
Size:
74mm OD 3.5 ISO Grohe thread.
Marking:
BWT, Grohe and flow arrow on body
Installation Requirements:
R001 R008 R120 R150 R170 R290
Expiry date:
31/01/2029
Model:
40691002 Grohe Blue Magnesium+Zinc
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240204708

Ceiling mounted multispray rain shower outlet. Open outlet. Max operating Temperature 60 °C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240204708
Size:
Stainless steel braided, PEX lined hoses ½” BSP (F) Stainless steel braided, PEX lined hoses 3/8” BSP (F)
Marking:
Grohe on body.
Installation Requirements:
R001 R009 R040
Expiry date:
28/02/2029
Model:
27939001 RSH F-Series 15” multispray shower

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240202040

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass body, various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240202040
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8” captive nut end connections.
Marking:
23.117.xxx - Grohe logo on body. 24.347.xxx – Grohe Spa logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
28/02/2029
Model:
23.117.XXX, 24.347.XXX. XXX denotes finish: 000 – Chrome, DC0 – Super Steel, AL0 – Brushed Hard Graphite.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240204053

Range of angle valves (brass bodies – various finishes), incorporating non-rising spindle headworks with a dome type operating members and NBR O-rings and PTFE Seals. Maximum working pressure 10 bar. Maximum operating temperature – Cold Water Use

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240204053
Size:
½” BSP (M) x 10mm Compression ½” BSP (M) x ½” BSP (M)
Marking:
Grohe on Valve Body
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
22.046.XXX - ½’’ x ½’’ 22.045.XXX - ½” x 3/8” 22.043.XXX - ½’’ x ½’’ 22.041.XXX - ½’’ x ½’’ 22.039.XXX - ½” x 3/8” 22.037.XXX - ½” x 3/8” 22.032.XXX - ½’’ x ½’’ 22.031.XXX - ½’’ x ½’’ 22.029.XXX - ½” x 3/8” 22.073.2430 - ½” x 3/8” 22.074.XXX - ½” x 3/8” XXX denotes different available finishes like 000 = chrome DL0 = brushed warm sunset AL0 = brushed hard graphite KF0 = phantom black

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2312349

Range of wall mounted, concealed, bath-shower mixer valves (brass bodies, chromium plated trim sets) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to two outlets. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2312349
Size:
½” BSP (F)
Marking:
Grohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
29.081.001 - BAULOOP

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240402021

Wall mounted, concealed, three-hole, single outlet combination tap assembly (brass body - various finishes). The product incorporates quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240402021
Size:
20.589.XXX is specifically for use with 29.025.002 which has ½” BSP (F) inlets.
Marking:
GROHE SPA on spout.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2029
Model:
20.589. XXX. Installation set = 29.025.002. Where XXX denotes finish, which can be replaced by the following: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240404022

Range of two hole, single outlet (fixed) wall mounted combination tap assemblies (chromium plated brass spout) incorporating a ceramic cartridge headwork with a joystick operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240404022
Size:
½” BSP (F).
Marking:
Spout Etched Grohe.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2029
Model:
19 968 000 2 Hole Basin Mixer, 19 969 000 2 Hole Basin Mixer. To be installed in conjunction with the concealed body (rough-in kit): 23 429 000.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 12 of 15

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.