“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250102006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm.

Marking:

A (manufacturers logo) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

<A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use (sizes 12mm-54mm only. 66.7mm, 76.1mm, 88.9mm & 108mm for above ground use only) Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107342

Size:

12mm - 108mm.

Marking:

<A> logo, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Press fitting-elbow 90° 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5002 0150000 APW5002 0220000 APW5002 0280000 APW5002 0350000 APW5002 0420000 APW5002 0540000: Press fitting-elbow 90°FTGXC MP5092:15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5092 0150000 APW5092 0220000 APW5092 0280000 APW5092 0350000 APW5092 0420000 APW5092 0540000 Press fitting-elbow 45° CXC APW5041: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5041 0150000 APW5041 0220000 APW5041 0280000 APW5041 0350000 APW5041 0420000 APW5041 0540000 Press fitting-elbow 45°FtgxC APW5040 : 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5040 0150000 APW5040 0220000 APW5040 0280000 APW5040 0350000 APW5040 0420000 APW5040 0540000 Press fitting-crossover CXC MP5085: 15mm, 22mm, 28mm APW5085 0150000 APW5085 0220000 APW5085 0280000 Press fitting-crossover FTGXC APW5086: 15mm, 22mm, 28mm APW5086 0150000 APW5086 0180000 APW5086 0220000 Press fitting-Straight Coupling APW5270: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5270 0150000 APW5270 0220000 APW5270 0280000 APW5270 0350000 APW5270 0420000 APW5270 0540000 Press fitting-equal tee APW5130: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5130 0151515 APW5130 0222222 APW5130 0282828 APW5130 0353535 APW5130 0424242 APW5130 0545454 Press fitting-reducing Tee APW5130R 15x15x22mm APW5130 0151522 22x15x15mm APW5130 0221515 22x15x22mm APW5130 0221522 22x22x15mm APW5130 0222215 22x22x28mm APW5130 0222228 28x15x15mm APW5130 0281515 28x15x22mm APW5130 0281522 28x22x15mm APW5130 0282215 28x22x22mm APW5130 0282222 28x22x28mm APW5130 0282228 28x28x15mm APW5130 0282815 28x28x22mm APW5130 0282822 28x28x35mm APW5130 0282835 35x22x22mm APW5130 0352222 35x22x35mm APW5130 0352235 35x28x22mm APW5130 0352822 35x28x28mm APW5130 0352828 35x28x35mm APW5130 0352835 35x35x15mm APW5130 0353515 35x35x22mm APW5130 0353522 35x35x28mm APW5130 0353528 42x28x28mm APW5130 0422828 42x35x35mm APW5130 0423535 42x28x42mm APW5130 0422842 42x35x42mm APW5130 0423542 42x42x15mm APW5130 0424215 42x42x22mm APW5130 0424222 42X42X28mm APW5130 0424228 42X42X35mm APW5130 0424235 54X54X15mm APW5130 0545415 54X54X28mm APW5130 0545428 54X54X35mm APW5130 0545435 54X42X42mm APW5130 0544242 54X54X42mm APW5130 0545442 Press fitting-fitting reducer FTGXC APW5243 22x15mm APW5243 0221500 28x15mm APW5243 0281500 28x22mm APW5243 0282200 35x15mm APW5243 0351500 35x22mm APW5243 0352200 35x28mm APW5243 0352800 42x15mm APW5243 0421500 42x22mm APW5243 0422200 42x28mm APW5243 0422800 42x35mm APW5243 0423500 54x15mm APW5243 0541500 54x22mm APW5243 0542200 54x28mm APW5243 0542800 54x35mm APW5243 0543500 54x42mm APW5243 0544200 Press fitting- reduced Coupler CXC APW5240 22x15mm APW5240 0221500 28x15mm APW5240 0281500 28x22mm APW5240 0282200 35x15mm APW5240 0351500 35x22mm APW5240 0352200 35x28mm APW5240 0352800 42x15mm APW5240 0421500 42x22mm APW5240 0422200 42x28mm APW5240 0422800 42x35mm APW5240 0423500 54x15mm APW5240 0541500 54x22mm APW5240 0542200 54x28mm APW5240 0542800 54x35mm APW5240 0543500 54x42mm APW5240 0544200 Press fitting-end stop MP5301: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5301 0150000 APW5301 0220000 APW5301 0350000 APW5301 0420000 APW5301 0540000

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of brass bodied gate valve with PTFE gaskets with hand wheel operated mechanism. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250408012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Conex logo, size & pressure rating on body. Conex, pressure and technical information on disc on hand wheel.

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

112210RRW200404 1/2” BSP 112210RRW200606 3/4” BSP 112210RRW200808 1” BSP 112210RRW201010 1 1/4” BSP 112210RRW201212 1 1/2” BSP 112210RRW201616 2” BSP

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Zheijang IDC Fluid Control.

Company Name

Zheijang IDC Fluid Control.

General Email

View All Listings by this Company

Range of spherical valves with DZR brass bodies, chrome plated brass balls and PTFE seats. The products incorporate a lever type operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250408015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Conex, CR, PN rating and size on the body. Conex on lever.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

122050RRR400404 – ½” 122050RRR400606 – ¾” 122050RRR400808 – 1” 122050RRR401010 – 1 ¼” 122050RRR401212 – 1 ½” 122050RRR401616 – 2”

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of Y patterned strainers with a brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” to 2” BSP/BSPT (F) x (F)

Marking:

Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label.

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

IDC 180210 series comprising of model codes: 180210RR0160404 180210RR0160606 180210RR0160808 180210RR0161010 180210RR0161212 180210RR0161616 180210FF0160404 180210FF0160606 180210FF0160808 180210FF0161010 180210FF0161212 180210FF0161616

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Zheijang IDC Fluid Control.

Company Name

Zheijang IDC Fluid Control.

General Email

View All Listings by this Company