Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a quarter turn ceramic disc headworks with either single lever, dome or cross-top operating members. The spout outlets incorporate plastic aerators or flow straighteners with a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2206373

Expiry date:

30/06/2027

Note:

R009 only applies to models supplied with PEX hoses.

Size:

Stainless steel braided EPDM or PEX lined flexible hoses with ½” BSP (F) captive nut end connections.

Marking:

CPS ON TAP BODY

Installation Requirements:

R001 R006 R009 R010

Model:

Models supplied with both variations of hose. 278586 - (chrome) 484852 - (chrome)

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The 304756, 110804, 304574, 304615 & 304711 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208816

Expiry date:

31/08/2027

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Model:

498181, 110118, 111989, 111990, 111991, 111992 Elbow 90 degree C X C: 8mm-54mm. 500132, 111994 & 111995 Street Elbow 90 degree Ftg X C: 8mm-54mm. 111997, 112000, 112001 & 112002 Street Elbow 45 degree Ftg X C: 8mm-54mm. 498154, 110034, 111940, 111986, 111987, 111988 Straight Coupling with groove C X C: 8mm-54mm. 304382, 304416, 112086, 498587, 306202, 304559 & 694586 Fitting Reducer Ftg X C: 8mm-54mm. 304188, 111996, 110260, 110265 & 500135 Reducing Coupler C X C: 8mm-54mm and ½”-1”. 112003, 112004, 500144 & 112006 Equal TEE CxCxC: 8mm-54mm. 112005, 304344, 304347, 304378, 500155 & 500172 Reducing Tee CxCxC: 8mm-54mm. 112391, 112393 & 112394 Cap: 8mm-54mm. 304756 & 110804 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 304574, 304615 & 304711 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of lever operated spherical valves with brass bodies (nickel plated), chrome plated brass balls, and EPDM ‘O’-rings. Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2207376

Expiry date:

31/07/2027

Size:

961134: 15mm compression x ¾” BSP (M), 961135: 15mm compression x 15mm 960818 : 15mm compression x ¾” BSP (M) x ¾” BSP (M),

Marking:

CPS), flow arrow and date of manufacture (MM-YY) on body.

Installation Requirements:

R001

Model:

960818 STR WASHING MACHINE TAP CP, 961134 ELBOW WASHING MACHINE TAP CP, 961135 TEE WASHING MACHINE TAP CP,

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The 950513, 950514, 950501, 950503 & 950502 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208817

Expiry date:

31/08/2027

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Model:

237738, 237770, 950504, 950505, 950506, 950507, 950508, 950509, 953104 & 953105 Elbow 90 degree C X C: 8mm-108mm. 237740, 237769, 501657, 950510, 950511, 950512, 954699 & 954700 Street Elbow 90 degree Ftg X C: 8mm-108mm. 501643, 501764, 577336, 858891, 858892 & 858893 Street Elbow 45 degree Ftg X C: 8mm-108mm. 952608, 952609, 952610, 954695, 954696, 954697, 237739 & 237743 Elbow 45 degree C X C: 8mm-108mm. 954750 & 954751 Partial Crossover Ftg x C: 12mm-28mm. 954668, 954669 & 954670 Slip Straight Coupling C X C: 8mm-108mm. 237772, 237773, 950489, 950490, 950491, 950492, 950493, 950494, 953091, 953092 & 954675 Straight Coupling with groove C X C: 8mm-108mm. 237741, 799352, 950495, 950496, 953097, 953098, 954678, 954679, 954680, 954681, 954682, 954683, 954684, 954685, 954686, 954687, 954688, 954689, 954690, 908683, 908706 Fitting Reducer Ftg X C: 8mm-108mm. 950497, 953093, 953094, 953095, 953096, 953172 & 954691 Reducing Coupler C X C: 8mm-108mm and ½” - 1”. 237733, 237736, 950515, 950516, 950521, 950528, 950529, 953111, 953112 & 954713 Equal TEE CxCxC: 8mm-108mm. 237767,496119, 689717, 813643, 950517, 950518, 950519, 950520, 950522, 950523, 950526, 950527, 953169, 954717, 954719, 954720, 954721, 954722, 954723, 954724, 954727, 954728, 954729, 954730, 954732, 954733, 954734, 954735 & 954736 Reducing Tee CxCxC: 8mm-108mm. 237735, 237742, 945648, 950531, 952561, 953113, 953114, 954738, 954739 & 954740 Cap: 8mm-108mm. 953117 & 954749 Full Crossover C x C: 12mm-28mm. 909039 & 909054 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 952367 Return Bend Stop: 15mm-54mm. 909065, 909104, 950546 & 954776 Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). 954710 BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 954745 & 954746 STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 950513 & 950514 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 950501, 950503 & 950502 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211814

Expiry date:

30/11/2027

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

CPS, size & date of manufacture MM/YY on body.

Installation Requirements:

R001

Model:

519390 Wallplate: 15mm-22mm x ½”-¾” BSP (F). 519392 Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). 713479 & 519412 Female Coupler: 15mm-54mm x ⅜”-2” BSP (F).

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company