`354` range of distribution manifolds with DZR brass bodies and multiple (2, 3, 4 or 5) shut off valves for hot and cold water services, for use with copper tube to (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

2403800

Expiry date:

31/03/2029

Size:

See model

Marking:

Caleffi logo on body and operating member. CR on body.

Installation Requirements:

R001

Model:

354052 Manifold: ¾” BSP (F) x ¾” BSP (M) x ø23mm 2 connections. 354053 Manifold: ¾” BSP (F) x ¾” BSP (M) x ø23mm 3 connections. 354054 Manifold: ¾” BSP (F) x ¾” BSP (M) x ø23mm 4 connections. 354055 Manifold: ¾” BSP (F) x ¾” BSP (M) x ø23mm 5 connections.

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)

Phone

+39 0322 8491

View All Listings by this Company

‘SATK 32’ range of indirect heat interface units providing instantaneous hot water. Domestic hot water is provided via a plate heat exchanger and this circuit incorporates a flow detector, stainless-steel filter and water hammer arrestor. The primary/space heating circuit incorporates a pressure relief valve set at 2.5 bar and an expansion vessel. Maximum working pressure of the domestic hot water circuit is 10.0 bar. Maximum working pressure of the primary circuit is 16.0 bar. Maximum working pressure of the space heating circuit is 2.5 bar. Maximum operating temperature 90°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2309313

Expiry date:

30/09/2028

Size:

¾” BSP (M).

Marking:

Caleffi and Caleffi logo moulded on face of unit. Caleffi, Caleffi logo, model number and technical info on data plate inside unit.

Installation Requirements:

R001 R140 R360

Model:

SATK32103 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 50kW. SATK32105 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 60kW. SATK32107 - Wall-mounted Indirect Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 75kW.

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)

Phone

+39 0322 8491

View All Listings by this Company

SATK Series 22 range of wall-mounted direct heat interface units providing heating and instantaneous hot water. The hot water is generated via a plate heat exchanger. Maximum working pressure of all water circuits (secondary hot water, primary and space heating) 10.0 bar. Maximum operating temperature 90°C.

Section:

1460 Heaters

Section Subtitle:

Supplied from storage only, gas, thermal storage.

WRAS Approval Number:

2309362

Expiry date:

30/09/2028

Size:

¾” BSP (M)

Marking:

Caleffi on casing. Model, pressure and other technical information on adhesive label inside casing.

Installation Requirements:

R001 R140 R360

Model:

SATK22303 - Wall-mounted Direct Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 50kW. SATK22305 - Wall-mounted direct Heat Interface Unit for Instantaneous domestic hot water production – DHW capacity 60kW. SATK22307 - Wall-mounted direct Heat Interface Unit for Instantaneous domestic hot water production – For low temperature primary circuit.

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)

Phone

+39 0322 8491

View All Listings by this Company

Inlet control group consisting of an in-line pressure reducing valve (adjustable pressure - see model) and a pre-set expansion relief valve (pre-set pressure - see model) housed in a DZR brass body with an EPDM rubber diaphragm. The product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Compression connection to be used with copper pipe EN1057 only. Maximum supply pressure 10.0 bar. Maximum operating temperature 40°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2310362

Expiry date:

31/10/2028

Size:

22mm compression

Marking:

Caleffi, flow arrow and CR on body

Installation Requirements:

R001 R120

Model:

Adjustment Range between 2.7 and 3.3 bar 533114 GLD 3 Bar Press Red / 4.5 Bar SRV 533114 CST 3 Bar Press Red / 4.5 Bar SRV 533014 CST 3 Bar Press Red / 4.5 Bar SRV 533201 CST 3 Bar Press Red / 6 Bar SRV 533002 CST 3 Bar Press Red / 6 Bar SRV 533112 CST 3 Bar Press Red / 6 Bar SRV 533113 CST 3 Bar Press Red / 8 Bar SRV 533118 CST 3 Bar Press Red / 8 Bar SRV Adjustment Range between 3.15 and 3.85 bar 533003 CST 3.5 Bar Press Red / 6 Bar SRV

Factor:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)

Phone

+39 0322 8491

General Email

info@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)

Phone

+39 0322 8491

General Email

info@caleffi.com

View All Listings by this Company

Range of filling loop assemblies, consisting of either a stainless steel braided, EPDM lined flexible hose assembly (300616 VIS and 300614 VIS) or a rigid copper tube assembly (3006315 VIS), a lever operated spherical valve and an in-line, non-verifiable double check valve assembly verified by test (suitable for backflow protection against fluid category 3) which incorporates an integral lever operated spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C , and 85°C for 300615 VIS.

Section:

1015 Filling Loop

WRAS Approval Number:

2312312

Expiry date:

31/12/2028

Size:

SEE MODELS

Marking:

Caleffi logo, CR & flow arrow on double check valve body. Caleffi logo on ball valve body.

Installation Requirements:

R001

Model:

300614 VIS: 1/4" BSP (M) 300615 VIS: 3/8” BSP (M) x 1/4" BSP (M) 300616 VIS: 3/8” BSP (M) x 1/4" BSP (M)

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)

Phone

+39 0322 8491

View All Listings by this Company