Boss range of 46W & 46CW Y-pattern strainers with DZR brass bodies and stainless steel strainers. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (BSP threaded models 2½”-3” and compression models). Maximum operating temperature 85°C.

Section:

1715 Strainers

WRAS Approval Number:

2007387

Expiry date:

31/07/2025

Size:

½”-3” BSP (F). 15 & 22mm compression.

Marking:

BOSS, PN, size,, CR, flow arrow and date of manufacture (MMYY) on body.

Installation Requirements:

R001 R120

Model:

Boss range of 46W & 46CW Y-pattern strainers with DZR brass bodies and stainless steel strainers. 15MM BOSS 46W Y STRAINER DZR, 20MM BOSS 46W Y STRAINER DZR, 25MM BOSS 46W Y STRAINER DZR, 32MM BOSS 46W Y STRAINER DZR , 40MM BOSS 46W Y STRAINER DZR, 50MM BOSS 46W Y STRAINER DZR, 15MM BOSS 46CW Y STRAINER DZR & 22MM BOSS 46CW Y STRAINER DZR

Factor:

BSS Industrial

Company Name

BSS Industrial

Address

BOSS Court, 7 Barton Close, Grove Park, Leicester

Postcode

LE19 1SJ

Phone

01162 623232 Telex: 342761

View All Listings by this Company

Range of combined pre-set temperature and pressure relief valves incorporating Bronze bodies, DZR brass seat and plunger, EPDM ‘O’-rings, PTFE seal and silicone diaphragm. The valves incorporate a manually operated lever easing gear. The valves are factory pre-set between 0.4 bar and 12.5 bar. Maximum operating temperature 90°C.

Section:

2030 Valves

Section Subtitle:

Combined thermal and pressure relief.

WRAS Approval Number:

2011099

Expiry date:

30/11/2025

Size:

½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½” BSP (M) inlet/BSP (F) outlet

Marking:

BOSS, date of assembly (DD/MM/YY), pressure rating, size, model on metal dataplate on body Flow arrow and CR on body. CR on inlet connector.

Installation Requirements:

R001

Model:

RANGE OF BOSS 958 Range of combined pre-set temperature and pressure relief valves DN15 ½”, DN20 ¾” DN25 1” DN32 1 ¼” DN40 1 ½” DN50 2” DN65 2 ½” All valves can be factory set between 0.4 to 12.5 bar with various springs.

Factor:

BSS Industrial

Company Name

BSS Industrial

Address

BOSS Court, 7 Barton Close, Grove Park, Leicester

Postcode

LE19 1SJ

Phone

01162 623232 Telex: 342761

View All Listings by this Company

Range of wall mounted hose union taps brass body incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

2104067

Expiry date:

30/04/2026

Size:

¾” BSP male inlet x 19mmØ hose outlet

Marking:

TPK, date of manufacture MM/YY and size on body.

Installation Requirements:

R001 R040

Model:

Warrior Brass Bibcock HOSE UNION TAP

Factor:

BSS Industrial

Company Name

BSS Industrial

Address

BOSS Court, 7 Barton Close, Grove Park, Leicester

Postcode

LE19 1SJ

Phone

01162 623232 Telex: 342761

View All Listings by this Company

Bib tap incorporating brass bodies. The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.

WRAS Approval Number:

2104342

Expiry date:

30/04/2026

Size:

Please see model

Marking:

TPK, date of manufacture (MMYY) & size on body.

Installation Requirements:

R001 R040

Model:

271 Warrior Bib tap: ½” BSP (M).

Factor:

BSS Industrial

Company Name

BSS Industrial

Address

BOSS Court, 7 Barton Close, Grove Park, Leicester

Postcode

LE19 1SJ

Phone

01162 623232 Telex: 342761

View All Listings by this Company