BSS Industrial Approvals


#1907395

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. The products incorporate a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0032 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EC - Verifiable double check valve.
WRAS Approval Number:
1907395
Expiry date:
31/07/2024
Size:
See model
Marking:
TPK (BSS is part of the Tarvis Perkins Group), CR, SIZE & FLOW ARROW ON BODY
Installation Requirements:
R001
Model:
15MM 211 WARRIOR DZR DOUBLE CHECK VALVE: 15mm compression. 22MM 211 WARRIOR DZR DOUBLE CHECK VALVE: 22mm compression.
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#2006808

Manually operated regulating valves with gunmetal bodies, controlled via a non-rising spindle. Valves incorporate PTFE gasket and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2165 Valves
Section Subtitle:
Flow control, pilot operated control.
WRAS Approval Number:
2006808
Expiry date:
30/06/2025
Size:
See model
Marking:
KIWA, DVGW, DN, PN, flow arrow and Boss on body.
Installation Requirements:
R001
Model:
Boss 20510102: ½” BSP (F) Boss 20510113: ¾” BSP (F)
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#1911067

Boss 38CM Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1505 Water Meters
WRAS Approval Number:
1911067
Expiry date:
30/11/2024
Size:
¾” BSP (m) - 2 ½” BSP (m) inlet/outlet
Marking:
B Meters on cap BOSS & TECHNICAL INFORMATION ON METER FACE FLOW ARROW ON BODY
Installation Requirements:
R001
Model:
BOSS 38CM
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#1910068

Range of gate valves with DZR brass bodies with a brass wedge and PTFE packing. The valves operate via a non-rising spindle headworks that incorporates a wheel type operating member. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
1910068
Expiry date:
31/10/2024
Size:
SEE MODEL
Marking:
TPK, DATE OF MANUFACTURE MM/YY, SIZE, BS 5154 & CR ON BODY PRESSURE, TEMPERATURE, BS5154/B & EN1254-2 ON OPERATING MEMBER
Installation Requirements:
R001
Model:
35mm, 42mm & 54mm 220DZR Warrior DZR GATE VALVES
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#1912071

Range of wall mounted hose union taps (various body materials) incorporating a non-rising spindle headwork with a butterfly handle operating member. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
1912071
Expiry date:
31/12/2024
Size:
½” BSP (M)
Marking:
TPK, DATE OF MANUFACTURE MM/YY, EN1213 & SIZE ON BODY
Installation Requirements:
R001 R040
Model:
1/2 270 WARRIOR (natural brass).
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#2007387

Boss range of 46W & 46CW Y-pattern strainers with DZR brass bodies and stainless steel strainers. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (BSP threaded models 2½”-3” and compression models). Maximum operating temperature 85°C.

Section:
1715 Strainers
WRAS Approval Number:
2007387
Expiry date:
31/07/2025
Size:
½”-3” BSP (F). 15 & 22mm compression.
Marking:
BOSS, PN, size,, CR, flow arrow and date of manufacture (MMYY) on body.
Installation Requirements:
R001 R120
Model:
Boss range of 46W & 46CW Y-pattern strainers with DZR brass bodies and stainless steel strainers. 15MM BOSS 46W Y STRAINER DZR, 20MM BOSS 46W Y STRAINER DZR, 25MM BOSS 46W Y STRAINER DZR, 32MM BOSS 46W Y STRAINER DZR , 40MM BOSS 46W Y STRAINER DZR, 50MM BOSS 46W Y STRAINER DZR, 15MM BOSS 46CW Y STRAINER DZR & 22MM BOSS 46CW Y STRAINER DZR
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#2011065

Range of screwed gland cock valves with bronze bodies, EPDM seats and ‘O’-rings. The products incorporate a hose union outlet connection. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2011065
Expiry date:
30/11/2025
Size:
½” BSP male x 14mm hose union, ¾” BSP male x 20mm hose union or 1” BSP male x 27mm hose union
Marking:
BOSS, H, GM & Size on body.
Installation Requirements:
R001
Model:
BOSS 81HU range
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company
Manufacturer:
Y.S. Valve Manufacturing Co. Ltd.
Company Name
Y.S. Valve Manufacturing Co. Ltd.
Address

View All Listings by this Company

Print This Approval


#2011099

Range of combined pre-set temperature and pressure relief valves incorporating Bronze bodies, DZR brass seat and plunger, EPDM ‘O’-rings, PTFE seal and silicone diaphragm. The valves incorporate a manually operated lever easing gear. The valves are factory pre-set between 0.4 bar and 12.5 bar. Maximum operating temperature 90°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2011099
Expiry date:
30/11/2025
Size:
½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½” BSP (M) inlet/BSP (F) outlet
Marking:
BOSS, date of assembly (DD/MM/YY), pressure rating, size, model on metal dataplate on body Flow arrow and CR on body. CR on inlet connector.
Installation Requirements:
R001
Model:
RANGE OF BOSS 958 Range of combined pre-set temperature and pressure relief valves DN15 ½”, DN20 ¾” DN25 1” DN32 1 ¼” DN40 1 ½” DN50 2” DN65 2 ½” All valves can be factory set between 0.4 to 12.5 bar with various springs.
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#2104067

Range of wall mounted hose union taps brass body incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
2104067
Expiry date:
30/04/2026
Size:
¾” BSP male inlet x 19mmØ hose outlet
Marking:
TPK, date of manufacture MM/YY and size on body.
Installation Requirements:
R001 R040
Model:
Warrior Brass Bibcock HOSE UNION TAP
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval


#2104342

Bib tap incorporating brass bodies. The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1750 Taps
Section Subtitle:
Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
WRAS Approval Number:
2104342
Expiry date:
30/04/2026
Size:
Please see model
Marking:
TPK, date of manufacture (MMYY) & size on body.
Installation Requirements:
R001 R040
Model:
271 Warrior Bib tap: ½” BSP (M).
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close
Postcode
LE19 1SJ
Phone
01162 623232 Telex: 342761

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.