Bristan Group Limited Approvals


#1907904

Single hole single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907904
Expiry date:
31/07/2024
Size:
Stainless steel braided EPDM lined flexible hose assembly with 15mm compression end connections
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
RGL CAP BASNW C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#1907069

Range of shower outlets & shower handsets with plastic bodies (chrome or white plated). Maximum operating temperature 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1907069
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP male or female
Marking:
BRISTAN ON CONNECTOR OF SHOWER OUTLET OR BRISTAN ON SHOWER HANDSET
Installation Requirements:
R001 R040
Model:
CAS HAND01 C, CAS HAND02 C, CAS HAND03 C, CAS HAND04 C, 760955CP & FHC CTRD02 C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#1910904

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium or nickel plated), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (models CNN EFSNK C & CNN EFSNK C TO) all other models incorporate a plastic aerator . Supplied with single check valves, verified by test (suitable for backflow protection against Fluid Category 2) incorporating a servicing valve. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910904
Expiry date:
31/10/2024
Note:
Tap only models are sold without the EasyFit base or connection hoses, but are only compatible with EF KIT PK
Size:
15mm compression to combined isolation valve/check valve
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
BLB EFSNK C, BLB EFSNK C TO (Tap only), CNN EFSNK C, CNN EFSNK C TO (Tap only), LMN EFSNK C, LMN EFSNK C TO (Tap only), LMN EFSNK BN (Brushed nickel), LMN EFSNK BN TO (Tap only, brushed nickel). Models added January 2021: CNN EFSNK BN & CNN EFSNK BN TO
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#1912902

In-line non-verifiable check valve assembly with integral isolation valve and plastic flow regulatior. Consisting of spring loaded resilient trim check valve cartridge housed within a chromium plated DZR brass body, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
1912902
Expiry date:
31/12/2024
Size:
15mm compression.
Marking:
Jianglin, WRAS and year of manufacture (YYYY) on body
Installation Requirements:
R001
Model:
ECO ISOL BAS
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
Packaging Industrial Zone, Yuhuan, Zhejiang
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval


#2001906

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001906
Expiry date:
31/01/2025
Size:
Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.
Marking:
Bristan logo on operating members
Installation Requirements:
R001 R006 R010
Model:
VAL BAS C CD Model added January 2021: VAL2 BAS C CD
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001907

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001907
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined hose assemblies, incorporating a ½” captive nut end connection.
Marking:
Cascade logo on the operating member
Installation Requirements:
R001 R006 R010
Model:
006.2119.3 003.2119.3
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001908

Range of pillar taps (chromium plated brass) with quater turn ceramic disc headwork and single lever type operating members. The spout outlet incorporates a plastic flow aerator. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001908
Expiry date:
31/01/2025
Size:
See model
Marking:
Bristan on operating member
Installation Requirements:
R001 R006
Model:
FRZ ½ C – ½” BSP (M) FRZ ¾ C – ¾” BSP (M)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001909

Self closing taps, (chrome plated brass bodies) with spring loaded headwork. The spout outlet incorporates a plastic flow straightner. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2001909
Expiry date:
31/01/2025
Size:
½” BSP (M)
Marking:
Bristan logo on the front of body
Installation Requirements:
R001 R006
Model:
Z2 ½ C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001911

Range of bar type thermostatic mixing valves. Flow is controlled via a quarter turn ceramic disc headwork using a dome type operating memeber. Temperature is controlled independently via a thermostatic mixing valve also using a dome type operating memeber. Inlets incorporate a single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model FZ SHXMMCTFF C is supplied with a shower hose, shower handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2001911
Expiry date:
31/01/2025
Size:
15mm compression
Marking:
Bristan on bar valve body
Installation Requirements:
R001 R010 R040
Model:
FZ SHXMMCTFF C, FZ SHXVOCTFF C
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2001912

Range of bar type thermostatic mixing valves, incorporating a quarter turn ceramic disc headwork controlling the flow using a down type operating member. Temperature is controlled via a thermostatic cartridge also using a dome type operating member. Inlets incorporate single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models ZI SHXSMCT C & ZI SHXSMCTFF C are supplied with a shower hose, handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2001912
Expiry date:
31/01/2025
Size:
See model
Marking:
Bristan logo etched on valve body
Installation Requirements:
R001 R010 R040
Model:
ZI SHXSMCT C – ¾” x ½” off set unions ZI SHXSMCTFF C – 15mm compression ZI SHXVOCTFF C – (Valve only)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001913

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2001913
Expiry date:
31/01/2025
Size:
15mm copper tube
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
VAC SNK C MT
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001914

Range of pillar taps (chromium plated brass) incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001914
Expiry date:
31/01/2025
Size:
See model
Marking:
Bristan on operating member
Installation Requirements:
R001 R005
Model:
VAC ½ C MT - 1/2" BSP (M) VAC ¾ C MT - 3/4" BSP (M)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001915

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001915
Expiry date:
31/01/2025
Size:
15mm copper pipe
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
VAC BASNW C MT
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001916

Two hole, double outlet swivel combination tap assembly (chrome plated brass), incorporating non rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightner. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0570 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, double outlet, swivel.
WRAS Approval Number:
2001916
Expiry date:
31/01/2025
Size:
½” BSP (M)
Marking:
Bristan logo etched on operating members
Installation Requirements:
R001 R006
Model:
VAC DSM C MT
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2003383

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2003383
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
BRISTAN ON TAP BODY
Installation Requirements:
R001 R006 R010
Model:
IRBS2-CP COMBINATION TAP ASSEMBLIES
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2004910

Two hole single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic aerator. The product is supplied with metal Backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2004910
Expiry date:
30/04/2025
Size:
¾” BSP (M)
Marking:
Bristan etched on the spout body
Installation Requirements:
R001 R006 R010
Model:
FRZ BF C
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2004911

Single hole double outlet (swivel) combination tap assembly (white coated brass) incorporating non-rising spindle headworks using dome type operating members. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2004911
Expiry date:
30/04/2025
Size:
15mm copper tube
Marking:
Bristan on operating members
Installation Requirements:
R001 R006 R010
Model:
VAC BSNK WHT
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2004912

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004912
Expiry date:
30/04/2025
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
J BASNW C
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2004913

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a 15x15mm compression single check valve assemblies (suitable for backflow protection against Fluid Category 2) which also incorporates an isolation valve, intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004913
Expiry date:
30/04/2025
Size:
Stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connections/15x15mm compression inlets.
Marking:
Bristan on operating members (indices)
Installation Requirements:
R001 R006 R010
Model:
RG SNK EF C, RG SNK EF C TO – Tap only.
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2004914

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic aerator. Products are supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004914
Expiry date:
30/04/2025
Size:
Stainless steel EPDM lined hose assemblies with 15mm compression end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
SAI BAS C, HOU BAS C.
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2001128

Overhead shower outlet with a chromium plated plastic body. Incorporating a plastic flow regulator and a combined EPDM washer and stainless steel strainer on the inlet. Maximum working temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2001128
Expiry date:
31/01/2025
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
BRISTAN ON FACEPLATE
Installation Requirements:
R001 R040
Model:
FHC ABSQ01 C SHOWER OUTLET
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2007386

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O`-rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2007386
Expiry date:
31/07/2025
Size:
½” BSP (F)
Marking:
Bristan, model, and other technical information on adhesive label on body
Installation Requirements:
R001 R415
Model:
1.5 bar Twin: 44436/ ST PUMP20TN 2.0 bar Twin: 44436/ ST PUMP20TN 2.0 bar Single: 44437/ ST PUMP20SG
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#1907081

Range of shower outlets & shower handsets with plastic bodies (chrome or white plated). Maximum operating temperature 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1907081
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP male or female
Marking:
BRISTAN body of shower handset.
Installation Requirements:
R001 R040
Model:
S33011-2C11 BR SHOWER HANDSET
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2012055

Two-hole, single outlet (fixed) combination tap assembly with brass body (chromium plated). The flow is controlled via a quater turn ceramic disc headworks and single lever operating members and a manually operated diverter to shower outlet. Supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012055
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
Bristan on indice of the diverter.
Installation Requirements:
R001 R006 R020
Model:
D2 BSM C CD
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2012056

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass). The flow is controlled via non-rising spindle headworks with cross top operating members and a manually operated diverter to shower outlet. Supplied with hose and handset. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012056
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
Bristan Regency on Indice.
Installation Requirements:
R001 R010 R040
Model:
R LBSM C
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144

View All Listings by this Company

Print This Approval


#2011094

Range of shower outlets with chromium plated bodies. Models P60901 and P61400 have check valves fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum operating temperature 70°C. Open outlet use only.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011094
Expiry date:
30/11/2025
Size:
½” BSP male
Marking:
BRISTAN ON HANDSET
Installation Requirements:
R001 R040
Model:
HAND117 C SHOWER OUTLETS
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2012911

Single hole, single outlet fixed combination tap assembly (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating. The spout outlet incorporates a plastic aerator or flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012911
Expiry date:
31/12/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 22mm compression end connections.
Marking:
Bristan on tap body
Installation Requirements:
R001 R006 R010
Model:
ALP 1HBF C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2012367

Range of shower handsets with chromium plated plastic bodies. Maximum operating temperature 75°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2012367
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Bristan on body.
Installation Requirements:
R001 R040
Model:
S06041 & ARC C Range of shower handsets
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2105903

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks with dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105903
Expiry date:
31/05/2026
Size:
15mm copper tails
Marking:
Bristan on the operating member.
Installation Requirements:
R001 R006 R010
Model:
VAC2 SNK C MT
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2105904

Range of two hole, single outlet (swivel) combination tap assemblies (chrome plated brass) incorporating quarter turn ceramic disk headworks and lever operating members. The spout outlet incorporates a plastic flow straightener. Supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105904
Expiry date:
31/05/2026
Size:
½” BSP (M)
Marking:
Bristan on the operating member.
Installation Requirements:
R001 R006 R010
Model:
VAL2 DSM C CD & VAL2 DSM C 6 CD (6” inch Lever)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2105905

Two hole, single outlet swivel combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks with dome operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105905
Expiry date:
31/05/2026
Size:
½” BSP (M)
Marking:
Bristan on the operating member.
Installation Requirements:
R001 R006 R010
Model:
VAC2 DSM C MT
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2105906

Two hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating non rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105906
Expiry date:
31/05/2026
Size:
½” BSP (M)
Marking:
Bristan on the operating member.
Installation Requirements:
R001 R006 R010
Model:
VAX2 DSM C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2105907

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating a thermostatic sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2105907
Expiry date:
31/05/2026
Size:
15mm Copper Tube
Marking:
Bristan on operating member.
Installation Requirements:
R001 R006 R010
Model:
SOLO2-T3LL & SOLO2-T3SL
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106900

Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. This product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2106900
Expiry date:
30/06/2026
Size:
¾” BSP Male
Marking:
Bristan on Plinth
Installation Requirements:
R001 R010 R006
Model:
QST BF C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106901

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. Model BTZ 1HF C incorporates a plastic flow straightener. Model BTZ SMBAS C incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106901
Expiry date:
30/06/2026
Size:
see model
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
BTZ 1HBF C - 15mm copper tails BTZ SMBAS C – ½” BSP Captive nut
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106902

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with single check valves with integral servicing valve for both inlets (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106902
Expiry date:
30/06/2026
Marking:
Bristan on the tap body
Installation Requirements:
R001 R006 R010
Model:
CHV EFSNK C CHV EFSNK C TO (Tap Only)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106903

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2106903
Expiry date:
30/06/2026
Size:
½” BSP captive nut
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
MLB SNK BLK – (Black) MLB SNK WHT – (White)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106904

Range of pillar taps (chrome plated brass) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2106904
Expiry date:
30/06/2026
Size:
½” BSP (M) & ¾” BSP (M)
Marking:
Bristan on the operating member
Installation Requirements:
R001 R006
Model:
J 1/2 C J 3/4 C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109905

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass) incorporating a ceramic cartridge headworks with single lever operating member. The spout outlets incorporate a plastic aerator. Model (PM BAS C) is supplied with a lever type pop-up waste. Maximum operating pressure 7.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109905
Expiry date:
30/09/2026
Note:
No testing on pop-up waste
Size:
Stainless steel braided, PEX lined hose assembly with 15mm compression end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
PM BAS C PM BASNW C.
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109906

Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headwork with cross-top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2109906
Expiry date:
30/09/2026
Size:
¾” BSP (M)
Marking:
Bristan on body
Installation Requirements:
R001 R006 R010
Model:
DX BF C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2110348

Range of overhead showers and shower handsets with plastic body (various finishes). Overhead shower inlets incorporate a stainless steel strainer Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2110348
Expiry date:
31/10/2026
Note:
Open outlet use only.
Size:
Overhead showers – ½” BSP (F) Shower Handsets – ½” BSP (M)
Marking:
Bristan on face plate on overhead showers Bristan on handle on shower handsets
Installation Requirements:
R001 R040
Model:
Overhead Showers: 40QD00136CP 40QD00136SP 40QD00136DH 40QD00136ZG Shower Handsets 40QS00150CP 40QS00150SP 40QS00150DH 40QS00150ZG 40QS00151CP 40QS00151SP 40QS00151DH 40QS00151ZG Models added October 2022: 40QS00150SA, 40QS00150QX, 40QS00151SA, 40QS00151QX.
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2110043

Two hole, single outlet, fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts, Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2110043
Expiry date:
31/10/2026
Size:
¾” BSP (M).
Marking:
Cascade (brand of Bristan) on operating members.
Installation Requirements:
R001 R006 R020
Model:
0062.21913.3 - Edge Bath Shower Mixer
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2001931

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001931
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined hose assemblies, incorporating a ½” captive nut end connection.
Marking:
Bristan on front of body
Installation Requirements:
R001 R006 R010
Model:
BRT SPH BAS C COMBINATION TAP ASSEMBLIES
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2106907

Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. This product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2106907
Expiry date:
30/06/2026
Size:
¾” BSP Male
Marking:
Bristan on front of tap body
Installation Requirements:
R001 R010 R006
Model:
COB BF BLK combination tap assembly
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2112313

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless steel filter and a plastic flow regulator. Maximum working temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2112313
Expiry date:
31/12/2026
Size:
½” BSP (F)
Marking:
Bristan on shower face
Installation Requirements:
R001 R040
Model:
40QD00137CP - Chrome 40QD00137LS - Stainless Steel 40QD00137DH - Matte Black 40QD00137SJ - Brushed Gold 40QD00137SH - Brushed Black 40QD00137SR - Brushed Nickel 40QD00138CP - Chrome 40QD00138LS - Stainless Steel 40QD00138DH - Matte Black 40QD00138SJ - Brushed Gold 40QD00138SH - Brushed Black 40QD00138SR - Brushed Nickel
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2004916

Two hole single outlet fixed combination tap assembly (chromium plated brass) incorporating quater turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2004916
Expiry date:
30/04/2025
Size:
¾ BSP (M)
Marking:
Bristan on tap body
Installation Requirements:
R001 R006 R010
Model:
HOU BF BLK COMBINATION TAP ASSEMBLY Model added November 2023: HOU BF BB
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2201901

Range of two-hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2201901
Expiry date:
31/01/2027
Size:
¾” BSP (M)
Marking:
Bristan on mixer body
Installation Requirements:
R001 R006 R010
Model:
CLI BF C & NR BF C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2201902

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201902
Expiry date:
31/01/2027
Size:
Stainless steel braided PEX lined hoses with 15mm compression end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
CLR BASNW C
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2201900

Range of single hole, single outlet (swivel) combination tap assemblies (chrome finish), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a fixing kit that incorporates isolation valves with single check valve assemblies (verified by test - suitable for backflow protection against fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201900
Expiry date:
31/01/2027
Size:
Stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connections and 15 compression isolation valves.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
RU SNK EF C & RU SNK EF C TO (TAP ONLY)
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2110107

Range of shower hoses with PVC outer (various finishes - see model), PET reinforcement layer, PVC inner liner and EPDM washers. Maximum operating temperature 65°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2110107
Expiry date:
31/10/2026
Note:
Open outlet use only.
Size:
½” BSP captive nut/conical (cone) nut (see model).
Marking:
DELMEI on conical nut. NT, WRAS and year of manufacture (YYYY) on ferrule. From February 2022 the products will be marked with: DELMEI, WRAS and year of manufacture (YYYY) on conical nut.
Installation Requirements:
R001
Model:
HOS 150CC01 W - 1.5m Cone to Cone Std Bore Shower Hose White HOS 150CNS01 C - 1.5m Cone to Nut Std Bore Shower Hose Satin HOS 175CNE02 C - 1.75m Cone to Nut Lrg Bore Shower Hose Easy Clean Chrome HOS 175CNE01 C - 1.75m Cone to Nut Std Bore Shower Hose Easy Clean Chrome HOS 150CNE02 C - 1.5m Cone to Nut Lrg Bore Shower Hose Easy Clean Chrome HOS 125CNE01 C - 1.25m Cone to Nut Std Bore Shower Hose Easy Clean Chrome HOS 150CNE01 C - 1.5m Cone to Nut Std Bore Shower Hose Easy Clean Chrome HOS 175CCE01 C - 1.75m Cone to Cone Std Bore Shower Hose Easy Clean Chrome HOS 150CCE01 C - 1.5m Cone to Cone Std Bore Shower Hose Easy Clean Chrome HOS Hose AAA Length of hose length in mm BB Connection type CC Cone to Cone CN Cone to Nut NN Nut to Nut E Easy clean Easy Clean CC Bore type 01 Small bore 02 Large Bore D Finish C Chrome W White G Gold
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.