Aqualisa Products Ltd. Approvals


#2212908

Range wall mounted, concealed, thermostatic shower valves (chrome plated brass, trim sets) incorporating a quarter turn ceramic disc headwork that controls the flow using cube or dome type operating members. The temperature is controlled independently via a thermostatic cartridge also cube or dome type operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products can be supplied with fixed arms and overhead showers. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2212908
Expiry date:
31/12/2027
Size:
15mm compression
Marking:
Valves Aqualisa on face plate. Shower arms Aqualisa on body. Overhead showers Aqualisa on shower face.
Installation Requirements:
R001 R010 R040
Model:
DRMDCV1.AD.RND DRMDCV1.FW.RND DRMDCV1.AD.SQR DRMDCV1.FW.SQR
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2212909

Range of concealed, thermostatic shower valves incorporating half turn ceramic disc headworks controlling and diverting the flow and the temperature is controlled independently via a thermostatic cartridge, both using either round or square operating members. Both inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products can be supplied with wall outlets, fixed arms, shower handsets, shower hoses and overhead showers. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2212909
Expiry date:
31/12/2027
Size:
15mm compression.
Marking:
Valves - Aqualisa on face plate. Wall outlets - Aqualisa on body. Fixed arms - Aqualisa on body. Shower handsets - Aqualisa on handset. Shower hoses - Aqualisa on conical nut. Overhead showers - Aqualisa on shower face.
Installation Requirements:
R001 R010 R040
Model:
DRMDCV2.HSFW.RND DRMDCV2.ADFW.SQR DRMDCV2.HSFW.SQR
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2212910

Range of concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model 704014 is the valve only; all other models are supplied with isolation valves and model HQD1003 is supplied with an exposed elbow. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2212910
Expiry date:
31/12/2027
Size:
15mm spigot
Marking:
Valves - Aqualisa and product information on adhesive label. Isolation valves - DM logo, size & flow arrow on body. Exposed elbow - DM and size on body
Installation Requirements:
R001 R008 R040
Model:
704014 HQD1001 HQD1003 HQD1005
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2212911

Range of concealed electronic thermostatic shower valve with a plastic body, the flow is controlled via two motorised valves for hot and cold supply. Both inlets incorporate a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with isolation valves and wall mounted concealed diverter valves with plastic bodies. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2212911
Expiry date:
31/12/2027
Size:
15mm spigot
Marking:
Valves - Aqualisa and product information on adhesive label. Isolation valves - DM logo, size & flow arrow on body. Diverter valves - AQUALISA and product info on body
Installation Requirements:
R001 R008 R040
Model:
HQD1015 HQD1017 HQD1019
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2212912

Range of electronically controlled thermostatic shower mixing valve with a plastic body. Temperature is controlled via two motorised valves and a thermistor. The product also incorporates a pump and plastic filters on each inlet. The products are supplied with wall outlets, fixed arms, fixed heads, isolation valves. Model ISD.A2.14 is also supplied with an exposed elbow. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Shower Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2212912
Expiry date:
31/12/2027
Size:
15mm spigot
Marking:
Valves - Aqualisa, maximum pressure, maximum temperature, and other product information on adhesive label on casing. Fixed head - Aqualisa on inlet connection. Fixed arm - Aqualisa on cover plate. Isolation valve - DM logo, size, and flow arrow on body. Hose - Aqualisa on conical nut Exposed Elbow - DM and size on body
Installation Requirements:
R001 R008 R010 R040
Model:
ISD.A2.BFC.14 ISD.A2.BFW.14 ISD.A2.BV.14 ISD.A2.EV.14
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2301709

Single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate plastic flow straighteners or aerators. The products are supplied with approved click type wastes, verified by test. . Maximum working pressure - 5.0 Bar Maximum operating temperature 65.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301709
Expiry date:
31/01/2028
Note:
No testing has been performed on pop-up waste.
Size:
Stainless Steel braided, EPDM lined flexible hoses with 1/2" BSP captive nut end connections.
Marking:
Aqualisa on operating member
Installation Requirements:
R001 R006 R010
Model:
CB.LPT.19 LARGE PILLAR COMBINATION TAP ASSEMBLY
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2106054

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2106054
Expiry date:
30/06/2026
Note:
Open outlet use only.
Size:
½” BSP Captive nut inlet x outlet.
Marking:
Elisa on conical nut.
Installation Requirements:
R001
Model:
706433 1.5m Matt Black 706432 1.5m Chrome 706434 1.5m Brushed Brass
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2205100

Range of showers handsets incorporating plastic bodies (chrome plated) Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2205100
Expiry date:
31/05/2027
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Elisa on handle.
Installation Requirements:
R001 R040
Model:
706364 slim pencil square brushed brass 706363 slim pencil square matt black
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2212342

Range of wall mounted electric showers (various finishes). The product incorporates a solenoid valve controlling the flow. Maximum working pressure 10.0 bar. Maximum operating temperature 53°C. Cold supply only.

Section:
1361 Heaters
Section Subtitle:
Electric Shower
WRAS Approval Number:
2212342
Expiry date:
31/12/2027
Note:
This approval does not include a shower hose and handset.
Size:
15mm plastic pipe.
Marking:
Aqualisa logo, model, power rating, pressure, Aqualisa name and address and other technical information on adhesive label on top of body.
Installation Requirements:
R001 R040
Model:
SEQD41 (Black Chrome - 8.5KW), SEQD42 (Black Chrome - 9.5KW), SEQD43 (Black Chrome - 10.5KW), SEKD41 (Black Chrome - 8.5KW), SEKD42 (Black Chrome - 9.5KW), SEKD43 (Black Chrome - 10.5KW), SEED41 (Black Chrome - 8.5KW), SEED42 (Black Chrome - 9.5KW), SEED43 (Black Chrome - 10.5KW), VOTZ25 (Satin Silver Trim - 8.5KW), VOTZ26 (Satin Silver Trim - 9.5KW), VOTZ27 (Satin Silver Trim - 10.5KW), VOXZ25 (Satin Silver Trim - 8.5KW), VOXZ26 (Satin Silver Trim - 9.5KW), VOXZ27 (Satin Silver Trim - 10.5KW), VOPZ25 (Satin Silver Trim - 8.5KW), VOPZ26 (Satin Silver Trim - 9.5KW), VOPZ27 (Satin Silver Trim - 10.5KW), MEMN31 (Slate Grey - 8.5KW), MEMN32 (Slate Grey - 9.5KW), MEMN33 (Slate Grey - 10.5KW), MEFN31 (Slate Grey - 8.5KW), MEFN32 (Slate Grey - 9.5KW), MEFN33 (Slate Grey - 10.5KW), MELN31 (Slate Grey - 8.5KW), MELN32 (Slate Grey - 9.5KW), MELN33 (Slate Grey - 10.5KW), MOBC85 (Chrome - 8.5KW), MOBC95 (Chrome - 9.5KW), MOBC105 (Chrome - 10.5KW), MOGC85 (Chrome - 8.5KW), MOGC95 (Chrome - 9.5KW), MOGC105 (Chrome - 10.5KW), MOWC85 (Chrome - 8.5KW), MOWC95 (Chrome - 9.5KW), MOWC105 (Chrome - 10.5KW). Models added August 2023: LMEP8501 Lumi+ electric shower 8.5kW, LMEP9501 Lumi+ electric shower 9.5kW, LMEP10501 Lumi+ electric shower 10.5kW, 707395 LUMI+8.5KW ENGINE, 707396 LUMI+9.5KW ENGINE, 707397 LUMI+10.5KW ENGINE.
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company
Manufacturer:
Xiamen E-Tec Electric Shower Co., LTD
Company Name
Xiamen E-Tec Electric Shower Co., LTD
Address
No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.
General Email

View All Listings by this Company

Print This Approval


#2303066

A range of adjustable shower rails (chrome plated brass) with EPDM O-rings.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2303066
Expiry date:
31/03/2028
Size:
½” BSP (M) x 15mm PE-x pipe.
Marking:
Aqualisa on body
Installation Requirements:
R001 R040
Model:
704694 Unity Q Integra Rail 704826 Unity Q Dual Integra Rail 704827 Smart Link Single Integra Rail 65 704828 Smart Link Single Integra Rail Smart Link Single Integra Rail Assembly 704777 Optic Q Exposed Assembly 704274 Quartz Touch Exposed 704978 Quartz touch exposed rail 705516 Visage MK3 Integra Rail 700971 Visage MK2 Integra Rail 704245 Quartz Blue integra Rail 704799 Quartz Blue Integra Rail 704975 Quartz Blue Exposed
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company
Manufacturer:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 11

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.