Section Code 5240 : Components. All components listed in this section have been tested for water contact suitability of material only.
Back To Directory Sections'ELGEF PLUS'. Black coloured, injection moulded HDPE electrofusion and spigot fittings. For use with water up to 60°C.
'Hydrothen PE 100 Black Pipe'. Black coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Fasopex Pipe'. Black coloured, extruded PE-X pipe. For use with water up to 85°C.
'Hydrolife-100'. Extruded, polyethlene pipes. The pipes are either black coloured (with blue coloured stripes) or blue coloured. For use with water up to 23°C.
'+GF+ Hakan HDPE PE100 Pipes'. Extruded PE100 pipes which are either blue coloured or black coloured (with blue stripes). For use with water up to 23°C.
'Unidelta Spigot Fitting'. Black coloured, injection moulded PE100 spigot fitting. For use with water up to 60°C.
'SC80 PIpe'. Dual layered, extruded PE pipe consisting of a black coloured inner layer and blue coloured outer layer. For use with water up to 23°C.
'Alhamra Plastic Factory PE100 PIpe'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
‘INFLEX BHD DUO & INFLEX BHD QUATTRO’. Extruded PEX/PE pipes. ‘INFLEX BHD DUO’ is a multi-layered pipe consisting of two, white coloured internal PEX-a layers, a grey coloured EPE foam middle layer and a black coloured PE outer layer. ‘INFLEX BHD QUATTRO’ is a multi-layered pipe consisting of four, white coloured internal PEX-a layers, a grey coloured EPE foam middle layer and a black coloured PE outer layer. For use with water up to 23°C.
'Hydrothene (blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Wirsbo inPEX'. White coloured (translucent), extruded polyethylene pipe. For use with water up to 85°C.
'Aquapipe'. Black coloured, extruded HDPE (PE100) pipe. For use with water up to 23°C.
'UPI HDPE Blue Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 60°C.
'Cool-FIT 4.0 & 2.0 Fittings'. Triple layered, injection moulded electrofusion fittings which comprise of black coloured inner layer, ivory coloured insulation layer and black coloured outer layer. For use with water up to 65°C.
'TN131 Sealing Tape PE33'. Black coloured, polyethylene foam strip with an adhesive layer on one side, manufactured by lamination. The non-adhesive side is the water contact part. For use with water up to 23°C.
'GPI Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 60°C.
'GPS N Blue PE80 Pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'Cosmoplast PEX-b Pipe'. White coloured, extruded PEX-b pipe. For use with water up to 85°C.
'Junnuo HDPE pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 23°C.
'Al Jubail PE100 blue'. Blue coloured, extruded PE100 pipe. For use with water up to 80°C.
'CR-01 PE Pipe'. Blue coloured, extruded PE pipe. For use with water up to 23°C.
'CR-02 PE Fitting'. Blue coloured, injection moulded PE fitting. For use with water up to 23°C.
'ELGEF PLUS'. Black coloured, injection moulded HDPE electrofusion and spigot fittings. For use with water up to 60°C.
'Tahwelya HDPE PIpe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'Plast Butt Fusion Fittings'. Black coloured, injection moulded HDPE butt fusion fittings manufactured from 'Borsafe HE3490-LS-H' material. For use with water up to 85°C.
'Polyfab PE100 Pipe'. Black coloured (with blue external stripes), extruded PE100 pipe. For use with water up to 85°C.
'Elbor PE 100 end cap'. Black coloured, injection moulded PE 100 end cap fitting. For use with water up to 65°C.
‘Georg Fischer (+GF+) HDPE PE100 Pipes and ‘Hepworth MDPE PE80 Pipes’ (formerly known as 'Hepworth HDPE PE 100 Pipe & MDPE PE 80 Pipe’). Black coloured (with or without blue stripes), extruded PE100 pipes. Black coloured, extruded PE80 pipes. For use with water up to 60°C.
'PE-UltraFLO Pipe'. Black coloured, extruded HDPE pipes. For use with water up to 85°C.
'Egelen PE100 & Egeplast 9010 pipes'. Egelen PE100 is a single layered, black coloured, extruded PE100 pipe. Egeplast 9010 is a dual layered, extruded PE100 pipe consisting of a black coloured inner layer and a blue coloured outer layer. For use with water up to 23°C.
'HEPWORTH (formerly known as Hepworth PME) Pipe'. Black coloured, extruded LDPE pipe. For use with water up to 60°C.
'Palconn EVOH PEX Pipe'. Extruded, multi-layered pipe consisting of a white coloured PEX inner, blue coloured EVOH middle layer and white coloured PEX outer. For use with water up to 85°C.
'Calibre HDPE Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'Hotace HDPE Black Pipe'. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 60°C.
'Donghailong PE Tank Panel'. White coloured, polyethylene panel manufactured by blow moulding. For use with water up to 23°C.
‘PDT-000002, PDT-000003, PDT-000004, PDT-000005 & PDT-000006’. Extruded, multi-layered pipes consisting of a white coloured PEX inner, blue coloured EVOH middle layer and white coloured PEX outer. For use with water up to 85°C.
'TAP HDPE Fittings'. Black or blue coloured HDPE fittings manufactured by injection moulding, extrusion and machining (lathe), extrusion and swept bend & extrusion and fabrication (butt-fusion process). For use with water up to 65°C.
'TAP HDPE Pipe'. Black or blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'CP Polytec PE80E Blue PIpe'. Blue coloured, extruded PE pipe. For use with water up to 23°C.
'Haykal Plast PE80'. Black coloured (with blue stripes), extruded PE pipe. For use with water up to 23°C.
'T-MECH PEX Pipe'. White coloured (opaque), extruded PEX pipe. For use with water up to 85°C.
'ALTOPOLY EVOH PEX Pipe'. Extruded, multi-layered pipe consisting of a white coloured PEX inner, blue coloured EVOH middle layer and white coloured PEX outer. For use with water up to 85°C.
'Omantech'. White coloured, extruded PERT pipe. For use with water up to 85°C.
'TW03'. White coloured (translucent), injection moulded polyethylene thrust washer. For use with water up to 85°C.
'Uponor PE 100 RC'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.
'Omanplast HDPE Pipe'. Black coloured (with blue external stripes), extruded HDPE pipe (manufactured in Muna Noor Plastic Industries LLC, Sohar & Muna Noor Manufacturing & Trading LLC, Rusayl, Oman). For use with water up to 60°C.
'UPI MDPE Pipe'. Black coloured, extruded MDPE pipe. For use with water up to 60°C.
'HTS-5055'. Blue coloured, extruded HDPE 'Hexagonal Tube Settler'. For use with water up to 23°C.
'Draka Comteq Cable Sheath: R607581 and R617141'. Black coloured, extruded polyethylene cable sheath. Added to approval in March 2023: 'Draka Comteq Cable Sheath: R607581 and R698927. Black coloured, extruded polyethylene cable sheath. Both are for use with water up to 85°C.
'Kaizen Electrofusion Saddle'. Blue coloured, injection moulded. HDPE electrofusion saddle fitting. For use with water up to 23°C.
Page 1 of 8
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
