Section Code 5180 : Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
Back To Directory Sections'Grilon TSG-30/4 FA Black 9840'. Black coloured, injection moulded PA material. For use with water up to 85°C.
Grilamid LBV-30H FWA natural & black 9225. Grilamid LBV-50H FWA natural & black 9225. Grilamid LBV-65H FWA natural & black 9225. Glass filled (30%, 50% & 65%), injection moulded nylon material available in natural and black colours. For use with water up to 85°C.
'Relon A500 Nero 4095 GF30 K'. Black coloured, injection moulded, glass filled PA66 material. For use with water up to 80°C.
ALCOM MS PA66+6I/X FC 2040 18074 BK0002-00'. Black coloured, injection moulded PA 6T/66 material. For use with water up to 85°C.
‘TECHNYL ® SAFE A 219WFC V50 BK’ (formerly known as 'TECHNYL ® A 218W V50 BLACK FA)'. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.
'Grilamid TR 60 natural'. Natural (appears amber coloured), injection moulded polyamide material. For use with water up to 85°C.
'Grilamid TR 55 natural'. Natural (appears amber coloured), injection moulded polyamide material. For use with water up to 85°C.
'Grilon BS/2 natural'. Natural (appears white coloured), injection moulded polyamide material. For use with water up to 85°C.
‘Mapex®AN4220SN(+), AN4320SN(+), AN4420SN(+), AN4520SN(+), AN4620SN(+), AN4720SN(+), AN4820SN(+), AN4920SN(+) & AN4A20SN(+)’. Beige coloured, injection moulded, glass fibre reinforced (10% to 50%) PA66 materials. For use with water up to 23°C.
'Ultramid A3K FC Aqua Uncoloured'. Uncoloured, (appears beige), injection moulded PA66 material. For use with water up to 85°C.
‘CELANYL A2 WR GF30 NC 1102/2’ (formerly known as 'Nylfor F664E 30HU NA 0001'). Off-white coloured, injection moulded nylon material. For use with water up to 85°C.
'Genestar™ G1350A-M47WF Black'. Black coloured, extruded, polyamide 9T material. For use with water up to 85°C.
'PLUSTEK PB305G33BK43'. Black coloured, injection moulded PA6 material. For use with water up to 23°C.
'PLUSTEK PAT302PWG50BK10'. Black coloured, injection moulded, glass-fibre reinforced polyamide material. For use with water up to 85°C.
'Spectrum Nylon Mesh Bag Filter Media'. White coloured, extruded nylon mesh. For use with water up to 85°C.
'DZT PANT I1000-NC; DZT PANT I10G05-NC; DZT PANT I10G10-NC; DZT PANT I10G15-NC; DZT PANT I10G20-NC; DZT PANT I10G25-NC; DZT PANT I10G30-NC; DZT PANT I10G35-NC; DZT PANT I10G40-NC; DZT PANT I10G45-NC; DZT PANT I10G50-NC; DZT PANT I10G55-NC; DZT PANT I10G60-NC; DZT PANT I10G65-NC (un-pigmented beige coloured)’. ‘DZT PANT I10G05-BK; DZT PANT I10G10-BK; DZT PANT I10G15-BK;DZT PANT I10G20-BK;DZT PANT I10G25-BK; DZT PANT I10G30-BK; DZT PANT I10G35-BK;DZT PANT I10G40-BK;DZT PANT I10G45-BK; DZT PANT I10G50-BK; DZT PANT I10G55-BK; DZT PANT I10G60-BK; DZT PANT I10G65-BK (black coloured)'. Injection moulded PA materials. For use with water up to 85°C.
'Grivory HT1VA-4 FWA (Natural) & Grivory HT1VA-4 FWA black 9225'. Natural (appears beige-green coloured) & black, injection moulded nylon materials. For use with water up to 85°C.
'Grivory HT1VA-5 FWA black 9225'. Black coloured, injection moulded nylon material. For use with water up to 23°C.
'Nylon YT60SF'. Beige coloured, injection moulded nylon material. For use with water up to 85°C.
'Mapex® AN4720SN 31FC'. Natural (appears beige coloured), injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.
'TROGAMID CX7323'. Natural (uncoloured, transparent), injection moulded polyamide material. For use with water up to 85°C.
'STARAMIDE AG7K-1001'. Light grey coloured, injection moulded PA66 material. For use with water up to 70°C.
‘Hylon N1040H2BK397 & Hylon N1030H2BK397’. Black coloured, injection moulded, glass-fibre filled, PA66 materials. For use with water up to 23°C.
'PLUSTEK PA100NT-F'. Cream coloured, injection moulded PA66 material. For use with water up to 85°C.
'ISONYL 66 GF 30 W BK'. Black coloured, injection moulded PA66 material. For use with water up to 23°C.
'Durethan BKV 15 F 901510 DUS018'. Black coloured, injection moulded PA6 GF 15 material. For use with water up to 85°C.
'Zytel® HTN 51G35 HSLR BK420'. Black coloured, injection moulded polyamide material. For use with water up to 85°C.
'TISLAMID PA6 GF 33 UV HS BK'. Black coloured, extruded PA6 material. For use with water up to 23°C.
'Hylon N1040H2BK397 W & Hylon N1030H2BK397 W'. Black coloured, injection moulded, glass fibre filled polyamide materials. For use with water up to 60°C.
'Latigloss 66 H2 G/50 Nat.:0003F2 (appears beige coloured) & Latigloss 66 H2 G/50 Black:3352F2 (black coloured)'. Injection moulded PA66 materials. For use with water up to 85°C.
Tecomid NA40 GR25 NL HS QF (white coloured) and Tecomid NG40 GR30 BK250 HS QW, Tecomid NA40 GR30 BK005 HY QH & Tecomid NA40 GR30 BK250 HY QW (black coloured). Injection moulded PA materials. Tecomid NA40 GR25 NL HS QF (white coloured) & Tecomid NG40 GR30 BK250 HS QW (black coloured) are suitable for use with water up to 85°C. Tecomid NA40 GR30 BK005 HY QH (black coloured) & Tecomid NA40 GR30 BK250 HY QW (black coloured) are suitable for use with water up to 23°C.
Radilon® DT CV300RKC2 106 NT (natural grade - appears grey coloured) & Radilon® DT CV300RKC2 306 BK (black coloured). Injection moulded, glass filled PA612 materials. For use with water up to 85°C.
'KN133G30 (off-white in colour) & KN133G15BL (black coloured)'. Injection moulded PA6 materials. KN133G30 is for use with water up to 65°C. KN133G15BL is for use with water up to 23°C.
'Plustek PB305G33BK37 (black)'. Black coloured, injection moulded, glass reinforced PA material. For use with water up to 85°C.
'Radilon A RV500RKC 106 NT'. Natural (appears beige coloured), injection moulded, glass filled PA66 material. For use with water up to 85°C.
.Radilon A RCM4010RKC 306 BK'. Black coloured, injection moulded, glass filled PA66 material. For use with water up to 85°C.
'Mapex AN4920SN FWB50'. Black coloured, injection moulded polyamide (with glass fibre) material. For use with water up to 85°C.
'Ultramid S3EG6 Balance Aqua Uncoloured'. Uncoloured (appears beige), injection moulded PA6/10 material. For use with water up to 85°C.
'Plustek PA7001G7BK11'. Black coloured, injection moulded polyamide material. For use with water up to 85°C.
'Genestar G1350A-M47WF Black'. Black coloured, injection moulded polyamide 9T (with glass fibres) material. For use with water up to 85°C.
'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.
'TECHNYL ® SAFE A 219WFC V30 BK’ (formerly known as ‘TECHNYL® A 218 W V30 BLACK FA’) - black coloured. ‘TECHNYL ® SAFE A 219WFC V30 NC’ (formerly known as 'TECHNYL® A 218 W V30 NATURAL') - off-white coloured. Injection moulded, glass fibre reinforced polyamide 6.6 materials. For use with water up to 85°C.
'RADILON® DT RV300RKC2 106 NT to RADILON® DT RV500RKC2 106 NT and RADILON® DT RV300RKC2 306 BK to RADILON® DT RV500RKC2 306 BK'. Natural (appears off-white in colour) or black, injection moulded glass fibre filled PA6.12 materials. For use with water up to 85°C.
‘TECHNYL ® SAFE D 219WFC V30 BK’ (formerly known as ‘TECHNYL ® eXten D 219 WFC V30 BLACK’). ‘TECHNYL ® SAFE D 219WFC V50 BK’ (formerly known as ‘TECHNYL ® eXten D 219 WFC V50 BLACK’). Black coloured, injection moulded, glass fibre reinforced polyamide 6.10 materials. For use with water up to 85°C.
'Taromid A 260 HW GS10 Black & Taromid A 260 HW GS10 Blue'. Black or blue coloured, injection moulded PA66 materials. For use with water up to 23°C.
'Grilon BG-35/2 natural & Grilon BG-35/2 black 9697'. Natural (appears white coloured, opaque) and black coloured, injection moulded PA6-GF35 materials. For use with water up to 85°C.
4TECH 9A22130 HW-A ABK & 4MID 9A22130 HR1W-A ABK (black coloured). Injection moulded PA materials. 4TECH 9A22130 HW-A ABK (black coloured) is suitable for use with water up to 85°C. 4MID 9A22130 HR1W-A ABK (black coloured) is suitable for use with water up to 23°C.
'RILSAN® BMN G8 TLDA'. Black coloured, injection moulded PA material. For use with water up to 23°C.
'RILSAN® BUM 30 O'. Grey coloured, injection moulded PA material. For use with water up to 23°C.
‘Tecomid NA40 GR30 BK005 HS QW, Tecomid NA40 GR35 BK005 HS QW, Tecomid NA40 GR40 BK005 HS QW, Tecomid NA40 GR45 BK005 HS QW & Tecomid NA40 GR50 BK005 HS QW’. Black coloured, glass-fibre reinforced PA66 materials. For use with water up to 23°C.
Page 1 of 3
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.