Water conditioners - Disinfectant ion generators

Section Code 2415 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed. It should also be noted that there is a likelihood of some materials being leached into the water, which together with materials already in the water at source, could exceed the maximum limits set in the EC Directive on Water Quality and therefore it is recommended that before putting such units into service where the water may be ingested, advice should first be sought from the Water Supplier. Products in this section actively use copper for microorganism control purposes, which are subject to the EU Biocidal Products Regulation EU 528/2012. Following an earlier prohibition of the active use of copper the EU Commission decisions of 13 February and 26 June 2014 granted the UK limited essential use derogations for the control of legionella on safety grounds. The derogation limited the range of applications to treat drinking water and water for human use such as bathing, showering and swimming pools and for animal pools. Therefore systems using copper to actively control legionella microorganisms for these prescribed applications can currently be lawfully installed under The Water Supply (Water Fittings) Regulations and Byelaws. Users should ensure these types of products are used in accordance with the authorisations issued by the HSE. Users should refer to the HSE website to keep themselves up to date on progress or for further information – www.hse.org.uk/ legionnaires/faqs.htm

Back To Directory Sections

#2103301

Range of ion generating water conditioners incorporating UPVC pipework and fittings, flow meter and stainless steel electrode pens contained within the electrode chamber. Maximum working pressure 9.0 bar. Cold water use only.

Section:
2415 Water conditioners - Disinfectant ion generators
WRAS Approval Number:
2103301
Expiry date:
31/03/2026
Size:
50mm pipe connection
Marking:
ICA, Water ionisation treatment on control panel. ICA water ionisation treatment on filter. Ateca, model. KIWA and other technical information on mounting plate.
Installation Requirements:
R001 R120 R150 R170 R290
Model:
ICA 100, 200, 300, 400, 500, 600
Manufacturer:
Ateca Production BV
Company Name
Ateca Production BV
Address
Ruychrocklaan 121 2597 EL Den Haag
Country
Netherlands
Phone
+31 70 3628175

View All Listings by this Company

Print This Approval


#2107067

Silver and copper disinfection ion generator with a plastic body, incorporating a plastic flow switch. Maximum working pressure 9.0 bar. For cold water use only

Section:
2415 Water conditioners - Disinfectant ion generators
WRAS Approval Number:
2107067
Expiry date:
31/07/2026
Note:
This product actively uses copper for microorganism control purposes. These are subject to the EU Biocidal Products Regulation EU 528/2012. The EU Commissions’ decision of 13 February and 26 June 2014 granted the UK limited essential use derogations only for the control of legionella and limits the range of applications where this product can be used. Users should ensure these types of products are used in accordance with the authorisations issued by the HSE. Users should refer to the HSE website to keep themselves up to date on progress or for further information – www.hse.org.uk/ legionnaires/faqs.htm
Size:
22mm spigot inlet & 22mm push fit outlet.
Marking:
ProEconomy Limited and Ray on adhesive label on body
Installation Requirements:
R001 R150 R170 R290 R415
Model:
Ray unit
Manufacturer:
ProEconomy Ltd.
Company Name
ProEconomy Ltd.
Address
23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes
Postcode
MK5 8HL

View All Listings by this Company

Print This Approval


#2303005

Ionisation system with stainless steel body and copper & silver electrodes. Maximum working pressure 12.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2415 Water conditioners - Disinfectant ion generators
WRAS Approval Number:
2303005
Expiry date:
31/03/2028
Size:
2” BSP (F)
Marking:
Manufacturer’s logo, model & serial number on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Model:
LC1K Models added December 2023: LC8K: 2” BSP (F) or DN100 Flanged. LC16K: 2” BSP (F) or DN100 Flanged.
Manufacturer:
Necon Technologies Limited
Company Name
Necon Technologies Limited
Address
Annaghdown, Corrandulla, Co Galway
Postcode
H91 YCX9
Country
Ireland

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.