Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Section Code 2410 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed. It should also be noted that there is a likelihood of some materials being leached into the water, which together with materials already in the water at source, could exceed the maximum limits set in the EC Directive on Water Quality and therefore it is recommended that before putting such units into service where the water may be ingested, advice should first be sought from the Water Undertaker.
Back To Directory Sections
WRAS Approval Number: #2306308
WRAS Approval Number: #2304093
Electrolytic scale inhibitors incorporating copper or nickel coated copper bodies.
Compression models are to be used with copper pipe manufactured to BS EN1057.
Maximum working pressure 10.0 bar. Cold water use only.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2304093
- Expiry date:
- 30/04/2028
- Size:
- 15mm compression
- Marking:
- ATAG, WRAS, model name, size and contact details on adhesive label on body.
- Installation Requirements:
- R001 R008 R120 R170
- Model:
-
ATAG Electrolytic Scale Reducer
Part Number: FC000500
- Factor:
- ATAG Heating Technology Ltd.
Company Name
ATAG Heating Technology Ltd.
Address
47 Castle Street,
Reading,
Berkshire
Postcode
RG1 7SR
View All Listings by this Company
WRAS Approval Number: #2304314
WRAS Approval Number: #2304095
Electrolytic scale inhibitors incorporating copper or nickel coated copper bodies.
Compression models are to be used with copper pipe manufactured to BS EN1057.
Maximum working pressure 10.0 bar. Cold water use only.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2304095
- Expiry date:
- 30/04/2028
- Size:
- See model
- Marking:
- Primaflow, model name, size and contact details on adhesive label on body.
- Installation Requirements:
- R001 R120 R170
- Model:
-
PRIMAFLOW (ELECTROLYTIC) 700 65 309 SCALE INHIBITORS - 15mm to 15mm compression.
- Factor:
- Primaflow F & P
Company Name
Primaflow F & P
Address
Votec House, Hambridge Lane,
Newbury
Postcode
RG14 5TN
Country
United Kingdom
View All Listings by this Company
WRAS Approval Number: #2304096
Electrolytic and magnetic scale inhibitors incorporating copper or nickel coated copper bodies.
Compression models are to be used with copper pipe manufactured to BS EN1057.
Maximum working pressure 10.0 bar. Cold water use only.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2304096
- Expiry date:
- 30/04/2028
- Size:
- see models
- Marking:
- Flomasta,WRAS, size and contact details on adhesive label on body.
- Installation Requirements:
- R001 R120 R170
- Model:
-
Flomasta Magnetic Scale Inhibitor 15mm Product Code 581CG Barcode 5024227700425 - 15mm to 15mm compression.
Flomasta Electrolytic Scale Inhibitor 15mm Product Code 1436F Barcode 5024227221500 - 15mm to 15mm compression.
.
- Factor:
- Kingfisher Plc.
Company Name
Kingfisher Plc.
Address
1 Paddington Square,
London
Postcode
W2 1GG
View All Listings by this Company
WRAS Approval Number: #2306339
WRAS Approval Number: #2309030
Magnetic scale reducers, incorporating chrome plated copper body, for use with copper pipe manufactured to BS EN1057.
Maximum working pressure 10.0 bar. Cold water use only.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2309030
- Expiry date:
- 30/09/2028
- Size:
- 15mm compression
22mm compression
- Marking:
- BoilerMag, SPEAR & JACKSON, model and other information on label on body.
- Installation Requirements:
- R001 R120 R150 R170 R290
- Model:
-
BMMSR
BMMSR/22
- Factor:
- Eclipse Magnetics Ltd
Company Name
Eclipse Magnetics Ltd
Address
Atlas Way, Atlas North,
Sheffield, S4 7QQ,
England.
View All Listings by this Company
WRAS Approval Number: #2309024
Range of scale inhibitor units with plastic body which uses sodium calcium polyphosphate. The assemblies incorporate a single check valve cartridge (suitable for backflow protection against fluid category 2).
Maximum working pressure 6.5 bar. Cold water use only.
Non-metallic materials and components comply with BS6920 at Cold water use only°C
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2309024
- Expiry date:
- 30/09/2028
- Size:
- 15mm & 22mm compression.
- Marking:
- Combimate on body
- Installation Requirements:
- R001 R120 R170 R290
- Model:
-
COM1 Combimate (15mm compression) & Combiphos starter pack 15mm fittings.
COM2 Combimate (22mm compression) & & Combiphos starter pack 22mm fittings.
- Manufacturer:
- Cistermiser
Company Name
Cistermiser
Address
Unit 1, Woodley Park Estate
59-69 Reading Road
Woodley
Postcode
RG5 3AN
Country
Reading
Phone
0118 921 5451
View All Listings by this Company
WRAS Approval Number: #2204363
Range of water conditioners with brass and stainless steel bodies, PTFE seals and sacrificial zinc anode. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.use only.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2204363
- Expiry date:
- 30/04/2027
- Size:
- see model
- Marking:
- Envirochemie and product info on body.
- Installation Requirements:
- R001 R120 R150 R170
- Model:
-
ENVI-EC 15 - ½” BSP male inlet/outlet.
ENVI-EC 20 - ¾” BSP female inlet/outlet.
ENVI-EC 20 MIDI - ¾” BSP female inlet/outlet.
ENVI-EC 25 - 1” BSP female inlet/outlet.
ENVI-EC 32 - 1¼” BSP female inlet/outlet.
ENVI-EC 40 - 1½” BSP female inlet/outlet.
ENVI-EC 50 - 2” BSP female inlet/outlet.
ENVI-EC PLUS 50 - DN50 flanged inlet/outlet.
ENVI-EC PLUS 65 - DN65 flanged inlet/outlet.
ENVI-EC PLUS 80 - DN80 flanged inlet/outlet.
ENVI-EC PLUS 100 - DN100 flanged inlet/outle
- Factor:
- Envirochemie UK
Company Name
Envirochemie UK
Address
Lily Hill Court Lily Hill Road
Bracknell Berkshire
Postcode
RG12 2SJ
Country
United Kingdom
View All Listings by this Company
WRAS Approval Number: #240102713
‘MagCat’ range of in-line water conditioners with stainless steel bodies and catalytic alloy core.
Maximum working pressure 16.0 bar.
Maximum operating temperature 100°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 240102713
- Expiry date:
- 31/01/2029
- Size:
- Please refer to model.
- Marking:
- Magcat, flow arrow and serial number on adhesive label on body.
- Installation Requirements:
- R001 R120 R170
- Model:
-
MagCat Range:
MAT15BS - ½” BSP (M).
MAT20BS - ¾” BSP (M).
MAT25BS - 1” BSP (M).
MAT32BS - 1¼” BSP (M).
MAT40BS - 1½” BSP (M).
MAT50BS - 2” BSP (M).
MAT65PN - 2½” Flanged.
MAT80PN - 3” Flanged.
MAT100PN - 4” Flanged.
MAT125PN - 5” Flanged.
MAT150PN - 6” Flanged.
- Manufacturer:
- Fluid Dynamics International Ltd
Company Name
Fluid Dynamics International Ltd
Address
Unit 10 Hybris Bus Park
Warmwell Rd
Crossways
Dorchester
Postcode
DT28BF
Country
Bucks.
Phone
+44 (0) 1628 634 073
View All Listings by this Company
Page 5 of 7
